UWL connection to SRM when using EP/UWL User mapping

Mon Aug 21 21:42:29 EDT 2006

Hmmm... thanks for letting us know the solution, Jerry
I'll keep an eye out for that one.  

I think there's something similar in the UWL config for ESS/MSS. 

Regards, 
Jocelyn Dart 
Senior Consultant 
SAP Australia Pty Ltd. 
Level 1/168 Walker St. 
North Sydney 
NSW, 2060 
Australia 
T   +61 412 390 267 
M   + 61 412 390 267 
E   jocelyn.dart at sap.com 
http://www.sap.com <http://www.sap.com/>  

The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents. 

Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.

Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated. 

________________________________

From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of jerry martinek
Sent: Tuesday, 22 August 2006 10:46 AM
To: SAP Workflow Users' Group
Subject: Re: RE: UWL connection to SRM when using EP/UWL User mapping

Hi Jocelyn,

Sory a small but important typo with the portal version. 

In the end, the error had nothing to do with UWL user mapping. The error
was caused by the fact that SRM UWL_SERVICE id had a role filter
assigned at the connection definition  while the ERP id didn't. As soon
as we removed the role filter, all SRM information started to appear as
expected.

Thanks,

Jerry Martinek  

Content-class: urn:content-classes:message Content-Type:
multipart/alternative; boundary="----_=_NextPart_001_01C6C57C.BFE1E413"
------_=_NextPart_001_01C6C57C.BFE1E413 Content-Type: text/plain;
charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Jerry,=20
=20 There's really no such thing as EP 8.0 - not yet anyway. Do you mean
EP 7.0 SPS8? =20 Did you look at what message is being shown for SRM on
the System Connection view? It's a context menu option on the right hand
side of the inbox in EP 7.0.=20 =20 =20 Regards,=20 Jocelyn Dart=20
Senior Consultant=20 SAP Australia Pty Ltd.=20 Level 1/168 Walker St.=20
North Sydney=20 NSW, 2060=20 Australia=20 T +61 412 390 267=20 M + 61
412 390 267=20 E jocelyn.dart at sap.com=20 http://www.sap.com =20 The
information contained in or attached to this electronic transmission is
confidential and may be legally privileged. It is intended only for the
person or entity to which it is addressed. If you are not the intended
recipient, you are hereby notified that any distribution, copying,
review, retransmission, dissemination or other use of this electronic
transmission or the information contained in it is strictly prohibited.
If you have received this electronic transmission in error, please
immediately contact the sender to arrange for the return of the original
documents.=20 Electronic transmission cannot be guaranteed to be secure
and accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof. Any views expressed in this electronic
transmission are those of the individual sender, except where the
message states otherwise and the sender is authorized to state them to
be the views of SAP AG or any of its subsidiaries. SAP AG, its
subsidiaries, and their directors, officers and employees make no
representation nor accept any liability for the accuracy or completeness
of the views or information contained herein. Please be aware that the
furnishing of any pricing information/ business proposal herein is
indicative only, is subject to change and shall not be construed as an
offer or as constituting a binding agreement on the part of SAP AG or
any of its subsidiaries to enter into any relationship, unless otherwise
expressly stated.=20 =20 ________________________________ From:
sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf Of
jerry martinek Sent: Saturday, 19 August 2006 6:38 AM To:
sap-wug at mit.edu Subject: UWL connection to SRM when using EP/UWL User
mapping Hi, Our UWL (EP8.0) is connected to two SAP systems, one is ECC
6 and the second is SRM 5. We implemented user mapping at the EP/UWL
level because our portal logon id is different from the SAP user logon
ids. The SAP user logon id is the same for our different SAP systems.
We've run into a problem where workitems generated from the ERP system
are displaying in the UWL and the SRM workitems are not. By this I mean
workitems generated for SAP logon id 001 are displaying in the UWL for
EP logon id 'A'. =20 Has anyone done this and if you have did you have a
similar problem? Thanks, Jerry Martinek
------_=_NextPart_001_01C6C57C.BFE1E413 Content-Type: text/html;
charset="US-ASCII" Content-Transfer-Encoding: quoted-printable 
Jerry, 

There's really no such thing as EP 8.0 - not = yet=20 anyway.  Do you
mean EP 7.0 SPS8?

Did=20 you look at what message is being shown for SRM on the System =
Connection=20 view?  It's a context menu option on the right hand = side
of the inbox=20 in EP 7.0. 

Regards, = 
Jocelyn=20 Dart 
Senior Consultant 
SAP Australia Pty Ltd. = 
Level 1/168 = Walker=20 St. 
North Sydney 
NSW, 2060 
Australia 
T   = +61 412 390=20 267 
M   + 61 412 390 267 
E   = jocelyn.dart at sap.com=20 
http://www.sap.com 

The=20 information contained in or attached to this electronic
transmission is=20 confidential and may be legally privileged. It is
intended only for the = person=20 or entity to which it is addressed. If
you are not the intended = recipient, you=20 are hereby notified that
any distribution, copying, review, = retransmission,=20 dissemination or
other use of this electronic transmission or the = information=20
contained in it is strictly prohibited. If you have received this =
electronic=20 transmission in error, please immediately contact the
sender to arrange = for the=20 return of the original documents. 

Electronic=20 transmission cannot be guaranteed to be secure and
accordingly, the = sender does=20 not accept liability for any such data
corruption, interception, = unauthorized=20 amendment, viruses, delays
or the consequences = thereof.

Any views=20 expressed in this electronic transmission are those of the
individual = sender,=20 except where the message states otherwise and
the sender is authorized = to state=20 them to be the views of SAP AG or
any of its subsidiaries. SAP AG, its=20 subsidiaries, and their
directors, officers and employees make no = representation=20 nor accept
any liability for the accuracy or completeness of the views = or=20
information contained herein. Please be aware that the furnishing of any
= pricing=20 information/ business proposal herein is indicative only,
is subject to = change=20 and shall not be construed as an offer or as
constituting a binding = agreement on=20 the part of SAP AG or any of
its subsidiaries to enter into any = relationship,=20 unless otherwise
expressly stated. 

________________________________

From: sap-wug-bounces at mit.edu=20 [mailto:sap-wug-bounces at mit.edu] On
Behalf Of jerry=20 martinek
Sent: Saturday, 19 August 2006 6:38 AM
To:=20 sap-wug at mit.edu
Subject: UWL connection to SRM when using = EP/UWL User=20 mapping

Hi,

Our UWL (EP8.0) is connected to two SAP systems, one is =  ECC 6 and=20
the second is SRM 5. We implemented user mapping at the EP/UWL level=20
because our portal logon id is different from the SAP user = logon=20
ids. The SAP user logon id is the same for our different = SAP=20
systems.

We've run into a problem where workitems generated from the ERP = system
are=20 displaying in the UWL and the SRM workitems are not. By this I
mean = workitems=20 generated for SAP logon id 001 are displaying in the
UWL for EP logon id = 'A'.  

Has anyone done this and if you have did you have a similar = problem?

Thanks,

Jerry Martinek

------_=_NextPart_001_01C6C57C.BFE1E413-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20060822/e41296ef/attachment.htm