UWL Issues

[Dart, Jocelyn]

Hi Paul, 
That's definitely NOT the complete URL - talk to portal admin.  


Regards,
Jocelyn Dart
Senior Consultant
SAP Australia Pty Ltd.
Level 1/168 Walker St.
North Sydney 
NSW, 2060
Australia
T   +61 412 390 267
M   + 61 412 390 267
E   jocelyn.dart at sap.com
http://www.sap.com

The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents. 
Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.
Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated. 


-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Paul Batey
Sent: Friday, 18 November 2005 12:28 PM
To: SAP Workflow Users' Group
Subject: RE: UWL Issues

Thanks Jocelyn.

I am using RSWUWFML2 and the url comes out into the email just fine.  I
am 
using the correct URL to the UWL 
(pcd:portal_content/xxxx/Roles/ESS/WhoIsWho/com.sap.netweaver.bc.uwl.uwl
_page)

When I execute a workitem from this URL it fills up the screen.  If I go
into the 
uwl from scratch through the menu paths, the workitem does not fill up
the 
screen.

I'll check the PCD settings.

> Paul, 
> 1) Please please please quit using RSWUWFML - use RSWUWFML2 - this 
copes
> with long URLS much better
> 
> Javascript access denied errors is most probably an indication that
you
> don't have your URL link correct yet
>  - you need to give the portal navigation path/pcd role etc.  - talk
to
> your portal admin
> 
> Whether the UWL executes in the current pane or a new window is
> controlled through Portal Content Directory (PCD)
> configuration - check your settings there. 
> 
> 2) Use the Back link above the work item, or open in workitem in a
> separate window and users can just close the window.
> 
> 3) Yes it does but periodically not immediately, and on user request
> (refresh button) - rememeber your UWL list is a poll of multiple
systems
> R/3, Alert Mgt System, Guided Procedures, KM notifications, non-SAP
> (watch this space...) - so to refresh immediately for all users could
> potentially be a performance issue. 
> Check your default refresh time settings - in the XML config file I
> believe but check it, global I think is in the PCD again.
> Possibly also in the user personalize view from memory? Check it. 
> 
> 4) Portal generally recommends not using back button - I think you can
> protect it - talk to your portal admin 
> 
> Check your EP 6.0 SP levels are up-to-date - best to at least be on
SP12
> if you can.
> 
> Regards,
> Jocelyn Dart
> Senior Consultant
> SAP Australia Pty Ltd.
> Level 1/168 Walker St.
> North Sydney 
> NSW, 2060
> Australia
> T   +61 412 390 267
> M   + 61 412 390 267
> E   jocelyn.dart at sap.com
> http://www.sap.com
> 
> The information contained in or attached to this electronic
transmission
> is confidential and may be legally privileged. It is intended only for
> the person or entity to which it is addressed. If you are not the
> intended recipient, you are hereby notified that any distribution,
> copying, review, retransmission, dissemination or other use of this
> electronic transmission or the information contained in it is strictly
> prohibited. If you have received this electronic transmission in
error,
> please immediately contact the sender to arrange for the return of the
> original documents. 
> Electronic transmission cannot be guaranteed to be secure and
> accordingly, the sender does not accept liability for any such data
> corruption, interception, unauthorized amendment, viruses, delays or
the
> consequences thereof.
> Any views expressed in this electronic transmission are those of the
> individual sender, except where the message states otherwise and the
> sender is authorized to state them to be the views of SAP AG or any of
> its subsidiaries. SAP AG, its subsidiaries, and their directors,
> officers and employees make no representation nor accept any liability
> for the accuracy or completeness of the views or information contained
> herein. Please be aware that the furnishing of any pricing
information/
> business proposal herein is indicative only, is subject to change and
> shall not be construed as an offer or as constituting a binding
> agreement on the part of SAP AG or any of its subsidiaries to enter
into
> any relationship, unless otherwise expressly stated. 
> 
> -----Original Message-----
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On 
Behalf
> Of Paul Batey
> Sent: Friday, 18 November 2005 11:33 AM
> To: SAP Workflow Users' Group
> Subject: UWL Issues
> 
> I know I'm going over old ground but I have a couple of the usual UWL
> related 
> issues and was hoping that solutions have been found, other than
> training.
> 
> 1) I am using RSWUWFML with a standard text to <a href> to the UWL.
It 
> doesn't work too badly on load, but then there are an awful lot of
> javascript 
> access denied errors.  Workitems executed also fill up the entire
window
> 
> instead of staying in the UWL pane.
> 
> 2) After workitem execution the browser does not return to the UWL.
> I've tried 
> an ~exiturl pointing to a redirect webpage back to the UWL but this
> again has 
> lots of javascript access denied problems.
> 
> 3) The UWL does not automatically refresh
> 
> 4) A user hitting the browser back button locks the workitem and
> requires a 
> quick SM12.
> 
> My client is using EP 6.0 SP14.
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
> 
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug



-- 


_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug