Forwarding Workitems from report SWI2_FREQ
Uday Malghan
umalghan at hns.com
Fri Jan 7 08:08:27 EST 2005
I did face similar situation.It was due to structural authorization. Do
you have structural authorization active?
Uday
"Kjetil Kilhavn" <kjetilk at statoil.com>
Sent by: sap-wug-bounces at mit.edu
01/07/2005 06:12 AM
Please respond to "SAP Workflow Users' Group"
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
cc:
Subject: RE: Forwarding Workitems from report SWI2_FREQ
If your Security team has checked that you have the same roles they should
also check that the roles contain the same authorization objects.
--
Kjetil Kilhavn
"Mark Pyc"
<markpyc at hotm To: sap-wug at mit.edu
ail.com> cc: (bcc: Kjetil Kilhavn)
Sent by: Subject: RE: Forwarding
Workitems from report SWI2_FREQ
sap-wug-bounc
es at mit.edu
06.01.2005
14:17
Please
respond to
"SAP Workflow
Users' Group"
G'day Sue,
Always be wary about ruling out auth issues. Best to try the report with a
user that has profiles SAP_ALL & SAP_NEW.
Have fun,
Mark
From: "Doughty, Sue (10607)" <Sue.Doughty at ngc.com>
Reply-To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
To: "'SAP Workflow Users' Group'" <sap-wug at mit.edu>
Subject: RE: Forwarding Workitems from report SWI2_FREQ
Date: Thu, 6 Jan 2005 07:47:31 -0500
I have an issue with this also. We are on 4.6C.
In the development box, I have the buttons to forward a workitem (using
SWI5
or SWIA), but when we moved to the QA box, I no longer have that
capability.
Security says they have ruled out that it's an authorization issue. They
took my userid in the test box and made a copy of it so the new one had
exactly the same things as my original UserID. When I tried to do it in
the
test box with the new test ID, I no longer have the ability to forward
workitems. They say that it indicates that there is a setting somewhere
that allows me this capability. I am set up as the Workflow Administrator
in both boxes, so I can't think of another setting that it might be!
Any help would be greatly appreciated!
Regards,
Sue T. Doughty
Northrop Grumman Information Technology
Internal Information Systems
757.380.3308
sue.doughty at ngc.com
-----Original Message-----
From: Dart, Jocelyn [mailto:jocelyn.dart at sap.com]
Sent: Thursday, September 16, 2004 6:44 PM
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: Forwarding Workitems from report SWI2_FREQ
Hi All,
SWIA and SWI2_ADM1 both contain the "administrator forward" function in
4.7.
Both of them also contain a "re-execute agent rules" function - i.e. re
run
the agent determination rule and assign the newly calculated agents to
active work items. Plus there are SAP_WAPI_ function modules for
administrator forward and reexecute rules as well.
As always, when you go to a new release - looking around to see what's
changed is a very good idea... Regards, Jocelyn
-----Original Message-----
From: SAP Workflow [mailto:Owner-SAP-WUG at MITVMA.MIT.EDU] On Behalf Of
Stephens, Monique S L
Sent: Friday,17 September 2004 1:15 AM
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: Forwarding Workitems from report SWI2_FREQ
We are on 4.7 and these are the steps I take to forward a workitem (which
is
slightly different from what I did in 4.6C):
1. From SWI5, I pull up the workitem in question
2. On the "Activities" tab, I need to double-click on the description. In
4.6C, we were able to click once on it, click another option, and then get
the option to forward. This time, I need to double-click on the
description
which actually brings me into the document as if I am going to release it.
3. I back out of the document screen and am then given the option to
forward.
Don't know if that helps or not.
Monique Stephens
-----Original Message-----
From: HELENE_PAQUIN at acdi-cida.gc.ca [mailto:HELENE_PAQUIN at acdi-cida.gc.ca]
Sent: Thursday, September 16, 2004 9:00 AM
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: Forwarding Workitems from report SWI2_FREQ
Hi Patricia,
We just got 4.7 as well and the only way I found to forward workitems is
with transaction SWIA. You have to know the workitem no, so I use SWI5 to
get the work item no. and then SWIA to forward it. If you find a better
way, please let us know.
Good luck!
Hélène Paquin
819-994-2249 | helene_paquin at acdi-cida.gc.ca | Télécopieur/Facsimile:
819-953-6359
Programmeur des déroulements SAP, Services et solutions à la clientèle
Direction générale de la gestion de l'information et de la technologie
Agence canadienne de développement international 200, promenade du
Portage,
Gatineau (Québec) Canada K1A 0G4
SAP Workflow Developer, Client Services and Solutions Division Information
Management and Technology Branch Canadian International Development Agency
200 Promenade du Portage, Gatineau (Quebec) Canada K1A 0G4
"Patricia G. Monroe"
<patricia.monroe at browards To:
SAP-WUG at MITVMA.MIT.EDU
chools.com> cc:
Sent by: SAP Workflow Subject: Re:
Forwarding Workitems from report SWI2_FREQ
<Owner-SAP-WUG at MITVMA.MIT
.EDU>
2004-09-13 02:56 PM
Please respond to SAP
Workflow Users' Group
"SAP Workflow Users' Group" <SAP-WUG at MITVMA.MIT.EDU> writes:
>Hi All,
>
>Normally I am able to forward workitems from report SWI2_FREQ by
>looking at the Workflow in question and going into the individual
>workitem.
>
>Unfortunately, I never get the option to forward where I am normally
>used to seeing it in this report. All my tasks are set to general
>under attributes and I have SAP_ALL authorization so I am a bit
>stumped.
>
>We are on 4.7 extension set 2.
>
>Thanks,
>Partha
>
>*Disclaimer:*
>This message (including any attachments) contains confidential
>information intended for a specific individual and purpose, and is
>protected by law. If you are not the intended recipient, you should
>delete this message. Any disclosure, copying, or distribution of this
>message, or the taking of any action based on it, is strictly
>prohibited.
>
Try clicking on the 'glasses' first and then the option to forward should
appear.
Patricia B. Monroe
SAP Workflow Administrator
954 712-1639
icm:2332
patricia.monroe at browardschools.com
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorised use, dissemination of
the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and
delete
this message.
Thank you.
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20050107/00197874/attachment.htm
More information about the SAP-WUG
mailing list