[LIKELY JUNK]Re: [LIKELY JUNK]Re: [LIKELY JUNK]Visualization parameter for task TS01000136
Nash John
emailtonash at gmail.com
Thu Jun 11 10:35:11 EDT 2009
Thanks Jocelyn. Will do. Appreciate your help.
On Tue, Jun 9, 2009 at 6:24 PM, Dart, Jocelyn <jocelyn.dart at sap.com> wrote:
> Hi Nash,
> Ok - I think your problem is either with the system alias used for this
> system on the portal or it is a missing authorizations issue or possibly
> missing iviews from the portal business package issue.
>
> Try using the link Display Details in SAP GUI in the UWL to see if you can
> access the system ok via SAPGUI for HTML. If you can get to transaction
> SWK1 ok with the technical work item display then your system alias ok and
> the SAPGUI for HTML connection for that system alias is ok. If not then you
> need to get your Portal/Basis folk to correct the system alias, webgui
> service in SICF, etc. to make sure SAPGUI for HTML is working at all.
>
> If that's ok get the Portal guys to search the portal logs for the
> exception code and see what it says. Sometimes the problem is the missing
> UWL_SERVICE user or <systemalias>$WebFlowConnector JCo Connection - which
> are essential for supporting UWL features correctly. Search on the term
> "UWL_SERVICE" to find the relevant notes. If you are using Central User
> Administration the user and JCo Connection have to be set up manually.
>
> Other than that try sending the work item to a user with SAP_ALL authority
> to determine if the problem is an authorization issue in the backend. If
> it's authorization in the Portal you again need to check the portal logs to
> see what messages appear around the exception.
>
>
> Regards,
> Jocelyn
>
> ________________________________
>
> From: sap-wug-bounces at mit.edu on behalf of Nash John
> Sent: Wed 10/06/2009 4:12 AM
> To: SAP Workflow Users' Group
> Subject: [LIKELY JUNK]Re: [LIKELY JUNK]Re: [LIKELY JUNK]Visualization
> parameter for task TS01000136
>
>
> Thanks Jocelyn. Appreciate your help.
>
> Still not working.We are getting a exception 'iView not found" . I
> followed all the steps you mentioned.
>
> 1) Removed task TS01000136 from SWFVISU.
> 2) 'Re-registered' in portal.
> 3) Cleared Cache.
> 4)generated a new workitem .
>
> Thanks and again appreciate all your helps
>
> Nash
>
>
>
>
> On Thu, Jun 4, 2009 at 5:25 PM, Dart, Jocelyn <jocelyn.dart at sap.com>
> wrote:
>
>
> Nash - Sorryb but you are missing the point... you should NOT have
> an entry in SWFVISU ***at all*** for that task unless you want that task to
> start a SAP web-based application.
> If you want it to call a standard SAP Transaction you should not
> have ANY entry in SWFVISU.
> Clear?
>
> All work items appear in the UWL from the registered systems
> automatically. If you don't have an entry in SWFVISU the UWL will launch
> your task using one of the default options i.e.
> a) Using the UWL's user decision template if it is a user decision
> work item
> b) Using the ITS if the task is linked to an ITS service
> c) Using SAP GUI for HTML for all other tasks
>
>
> So REMOVE your task visualization entry completely from SWFVISU and
> re-register, and clear the cache, and all should then be well.
>
> You should also check the user has the UWL authorisations -
> especially they are allowed to run transaction SWNWIEX which is the handler
> transaction that enables the call to all other SAPGUI transactions.
>
> Regards,
> Jocelyn
>
> ________________________________
>
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
> Behalf Of Nash John
> Sent: Friday, 5 June 2009 1:04 AM
>
> To: SAP Workflow Users' Group
>
> Subject: [LIKELY JUNK]Re: [LIKELY JUNK]Visualization parameter for
> task TS01000136
>
>
> Jocelyn,
>
> Still not working. I'm still getting a exception. I think I'm still
> missing some piece somewhere. I did 'Re- Register' in portal.
>
> I did register std. task TS01000136 in SWFVISU. However I dont what
> entry should i select under 'Visualization Type'. I have following choices
> under "Visualization Type' BSP Blueprint,BSP Standard, Java WebDynpro, ABAP
> WebDynpro, iView, Portal Component, Portal Page, Object-Based Navigation and
> Object not represented.
>
> I did not make any entry in 'Visualization Parameter' in SWFVISU as
> I'm calling an SAP transaction in UWL.
>
> Workflow is triggered by backend transaction 'OOQA'. I'm able to
> execute workitem in SBWP but in uwl i'm getting following exception.
>
> Portal Runtime Error
>
> An exception occurred while processing your request
>
> Exception id: 10:44_04/06/09_0009_11940250
>
> Thanks,
>
> Nash
>
> On Thu, Jun 4, 2009 at 9:41 AM, Nash John <emailtonash at gmail.com>
> wrote:
>
>
> Thanks Jocelyn. You are the best!
>
>
> On Thu, Jun 4, 2009 at 4:02 AM, Dart, Jocelyn <
> jocelyn.dart at sap.com> wrote:
>
>
> Nash,
> You only need to use transaction SWFVISU if you are
> calling a SAP web-based application such as a WebDynpro ABAP.
> The default is to call a SAP Transaction code - so
> if that is all your method is doing you don't need to do anything in SWFVISU
> to register the task with the UWL.
>
> All you need to do is Re-Register your system in the
> UWL Admin iview to pick up your new task, then clear the Cache in the UWL
> Admin iview as well to make any changes immediately effective.
>
> By the way, if you are calling WebDynpro ABAP then
> APPLICATION is the WebDynpro ABAP application id, DYNPARAM is for any
> parameters you want to pass (the default parameter WI_ID containing the work
> item id is always passed), NAMESPACE is just sap if you aren't using
> namespaces. PACKAGE only applies to calling WebDynpro Java applications.
>
> Good luck.
> And get Darren Hague's book on the Universal
> Worklist if you need further guidance as this will save you some time.
> Regards,
> Jocelyn
>
> ________________________________
>
> From: sap-wug-bounces at mit.edu on behalf of Nash
> John
> Sent: Thu 4/06/2009 3:20 AM
> To: SAP Workflow Users' Group;
> sap-wug-request at mit.edu
> Subject: [LIKELY JUNK]Visualization parameter for
> task TS01000136
>
>
>
> Hi Friends,
>
> We are using standard workflow WS01000089 for
> Qualification expiration in PD. Transaction code we use is 'ooqa'. My
> question is how to register task TS01000136 with UWL? I need some
> information on task registration in SWFVISU
>
> APPLICATION ,DYNPARAM and PACKAGE. How do I find
> Application name and package?
>
> Thanks
>
> Nash
>
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>
>
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>
>
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20090611/cbc9b2ec/attachment.htm
More information about the SAP-WUG
mailing list