SAP-WUG Digest, Vol 40, Issue 27
Srivastava, Pawan
Pawan.Srivastava at bhpbilliton.com
Mon Mar 17 02:12:31 EDT 2008
SUB: Issue with the Rejection reason in Portal. (Srivastava,
Pawan (Shai Eyal)
Hi Shai,
I have tried to use "SAVE_TEXT" message as suggested by you but its not
working even in R/3, I have linked a method which is calling the above
said FM in the user decision as secondary method and after the reject
selection, this method is being called by task.
However I have tried to use "EDITOR-CALL" in my customize method and
have set as secondary method in user decision but it seems that
secondary methods executes before the user decision and hence can't be
used.
When I am trying to use the same method in "After WI execution" in user
decision, it works fine in backend.
But the Issue still persist in Portal.
Suggestions are welcome.
Thanks & Regards,
Pawan Srivastava
-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of sap-wug-request at mit.edu
Sent: Thursday, 13 March 2008 2:02 AM
To: sap-wug at mit.edu
Subject: SAP-WUG Digest, Vol 40, Issue 27
Send SAP-WUG mailing list submissions to
sap-wug at mit.edu
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.mit.edu/mailman/listinfo/sap-wug
or, via email, send a message with subject or body 'help' to
sap-wug-request at mit.edu
You can reach the person managing the list at
sap-wug-owner at mit.edu
When replying, please edit your Subject line so it is more specific than
"Re: Contents of SAP-WUG digest..."
Today's Topics:
1. RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
(Mike Pokraka)
2. RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
(Mike Pokraka)
3. RE: Missing notifications in Business Workplace (Mike Pokraka)
4. RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
(Keohan, Susan)
5. Re: Issue with the Rejection reason in Portal. (Srivastava,
Pawan (Shai Eyal)
----------------------------------------------------------------------
Message: 1
Date: Wed, 12 Mar 2008 13:42:37 -0000 (UTC)
From: "Mike Pokraka" <wug at workflowconnections.com>
Subject: RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
<37449.212.157.1.1.1205329357.squirrel at workflowconnections.com.mail.aais
p.net.uk>
Content-Type: text/plain;charset=iso-8859-1
On Tue, March 11, 2008 1:59 pm, Keohan, Susan wrote:
...
> (I'm not using swi2_adm1 in my house).
>
HUH??? Scary!
------------------------------
Message: 2
Date: Wed, 12 Mar 2008 13:53:47 -0000 (UTC)
From: "Mike Pokraka" <wug at workflowconnections.com>
Subject: RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
<38128.212.157.1.1.1205330027.squirrel at workflowconnections.com.mail.aais
p.net.uk>
Content-Type: text/plain;charset=iso-8859-1
Hi Paul,
In the scenario you describe, removing the 'teminateblablah...' flag
should result in the workitem going to all agents (general task) if
there is no rule result.
General tasks that really do go to all agents are a little bit special.
I think. In some versions anyway. Because they are general, the agents
aren't listed in the log - in 700 it says 'All agents can process...',
not sure about other versions.
BTW, I also had an argument with OSS a long time ago that SWI2_ADM1 does
NOT do what it says on the tin - I reported that it won't pick up
orphaned items due to deleted users. Instead of fixing it they have now
given us
SWI2_ADM2 to look for this. <shrug> heaven knows why.
Cheers,
Mike
On Tue, March 11, 2008 10:52 pm, Paul.Bakker at osr.treasury.qld.gov.au
wrote:
> Sue,
>
> Hold on a minute.. on page 280 of The Book, it says that if no
> responsible agents are found AND no terminate flag is set, then (4.6C
> and above) "the workitem is either assigned to the workflow
> adminsitrator or orphaned
> - ie it stays in ready status with no agents assigned"
>
> It then goes on to give a Tip :
> "transaction SWi2_ADM1 lets you view and correct orphaned workitems"
>
> Eh? My experience here is that 'orphaned' workitems (as described
> above) do not appear in SWI2_ADM1.
> They only appear in that list if they have no *possible* agents.
>
> This is a shame, as SWi2_ADM1 allows you to forward workitems and redo
> agent rules, while SWi2_DIAG does not.
>
> (We are on Basis 6.20.)
>
> cheers
> Paul
>
>
>
>
>
> "Keohan, Susan"
> <keohan at ll.mit.ed
> u>
To
> Sent by: "SAP Workflow Users' Group"
> sap-wug-bounces at m <sap-wug at mit.edu>
> it.edu
cc
>
>
Subject
> 11/03/2008 11:59 RE: agent errors go to
SWI2_ADM1
> PM instead of SWI2_DIAG
>
>
> Please respond to
> "SAP Workflow
> Users' Group"
> <sap-wug at mit.edu>
>
>
>
>
>
>
> Hi Paul,
> I think that you've answered your own question. That with the task
> marked as 'General'... All users in the system can process it, so it
> can't be found in swi2_adm1. Can you test this out by switching from
> General Task, and confirm or deny my suspicion ?
> (I'm not using swi2_adm1 in my house).
>
> Cheers,
> Sue
>
> ----
> Susan R. Keohan
> SAP Workflow Specialist
> MIT Lincoln Laboratory
> 244 Wood Street, LI-200
> Lexington, MA. 02420
> Ph: 781-981-3561
> Fax: 781-981-1607
> keohan at LL.MIT.EDU
>
>
> -----Original Message-----
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
> Behalf Of Paul.Bakker at osr.treasury.qld.gov.au
> Sent: Monday, March 10, 2008 3:19 AM
> To: SAP-WUG at mit.edu
> Subject: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
>
> My Dear WUG'ers,
>
> CRM 4.0, Basis 6.20
>
> I have a workitem that uses a PFAC rule to determine the responsible
> agents. I have set the flag 'terminate if rule resolution has no
> result', so that if something goes wrong with the rule, the workitem
> will end up in SWI2_DIAG.
>
> This works as expected, but I am wondering how I can make the workitem
> appear in SWI2_ADM1 instead ('Workitems without Agents').
>
> I thought it was simply a matter of removing the 'Terminate' flag in
> PFAC. This certainly prevents it from going into error, but
> surprisingly it does not then appear in SWI2_ADM1.
>
> [And yes I have checked (in the workflow log) that the set of
> responsible agents is indeed empty].
>
> So my question is: how do you arrange for workitems to end up in
> SWi2_ADM1?
>
> The particular TS task I am using has the attribute 'General Task'.
>
> thanks
> Paul
>
>
> **********************************************************************
> **********************************************************************
> **********
>
>
> Only an individual or entity who is intended to be a recipient of this
> e-mail may access or use the information contained in this e-mail or
> any of its attachments. Opinions contained in this e-mail or any of
> its attachments do not necessarily reflect the opinions of Queensland
> Treasury.
>
> The contents of this e-mail and any attachments are confidential and
> may be legally privileged and the subject of copyright. If you have
> received this e-mail in error, please notify Queensland Treasury
> immediately and erase all copies of the e-mail and the attachments.
> Queensland Treasury uses virus scanning software. However, it is not
> liable for viruses present in this e-mail or in any attachment.
>
> **********************************************************************
> **********************************************************************
> **********
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
------------------------------
Message: 3
Date: Wed, 12 Mar 2008 13:58:38 -0000 (UTC)
From: "Mike Pokraka" <wug at workflowconnections.com>
Subject: RE: Missing notifications in Business Workplace
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
<38421.212.157.1.1.1205330318.squirrel at workflowconnections.com.mail.aais
p.net.uk>
Content-Type: text/plain;charset=iso-8859-1
Agree, that's an awful lot of duplication that would apply to EVERYTHING
if it worked differently. When you set up the "Send to home addresses"
it's a complete forwarding.
On Tue, March 11, 2008 3:45 pm, Sue Doughty wrote:
> Carmen,
>
>
>
> The only way I know to have the mail go into the SAP Document Inbox
> would be to have each user go into their Business Workplace and click
> Settings-->Office Settings and then create a Forwarding entry like
> Settings-->below
> selecting the "Also place in inbox" box. I don't understand why you
> want to do that if they are already getting the emails. This just
> adds extra duplicate documents into the SAP in-box that will add up
> and will have to be manually deleted by the user.
>
>
>
>
>
>
>
> Regards,
>
> Sue T. Doughty
>
> SAP Workflow Specialist
>
> Old Dominion Freight Line, Inc.
>
> 500 Old Dominion Way
>
> Thomasville, NC 27360
>
> Phone: (336) 822-5189
>
> Toll Free (800 ) 432-6335, ext. 5189
>
> Email: sue.doughty at odfl.com
>
> ________________________________
>
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
> Behalf Of Carmen Cheung, ROC - the SAP HCM Specialists
> Sent: Tuesday, March 11, 2008 10:26 AM
> To: sap-wug at mit.edu
> Subject: Missing notifications in Business Workplace
>
>
>
> Hi All,
>
>
>
> I'm currently working in R/3 4.7 and have added some send mail steps,
> using the SENDTASKDESCRIPTION method, in my workflow template.
>
>
>
> The SO16 transaction has been set up to 'Send to home addresses of
> users'. The mails are going our through to our SCOT and SOST
> configuration to the email addresses of users per their SU01 records.
>
>
>
> The issue we are facing is that the notifications are not visible in
> the 'Document Inbox' of the users' R/3 business workplaces.
>
>
>
> If you have any ideas on what I'm missing, that would be very helpful.
>
>
>
> Many thanks in advance,
>
>
>
> Carmen
>
>
>
> ****************************
> CONFIDENTIALITY NOTICE: The information contained in this message may
> be confidential, privileged, proprietary, or otherwise legally exempt
> from disclosure. If the reader of this message is not the intended
> recipient, or an employee or agent responsible for delivering this
> message to the intended recipient, you are hereby notified that you
> are not authorized to read, print, retain, copy or disseminate this
> message, any part of it, or any attachments. If you have received this
> message in error, please delete this message and any attachments from
> your system without reading the content and notify the sender
immediately of the inadvertent transmission.
> Thank you for your cooperation.
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
------------------------------
Message: 4
Date: Wed, 12 Mar 2008 10:07:23 -0400
From: "Keohan, Susan" <keohan at ll.mit.edu>
Subject: RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
<E74DD9A4E0338F4F98DBE83861654A0C06B112E90A at LLE2K7-BE01.mitll.ad.local>
Content-Type: text/plain; charset="us-ascii"
Perhaps it's not necessary due to my extraordinary level of ...
um...whatever.
I just ran it, and there's nothing there. Only 3 since day 1 (October
2003) and those WFs had been completed long ago.
Anyway, thanks for the kick in the derrier, Mike. Now I will get to run
another transaction! And I've called myself a WF Admin. Shame on me.
----
Susan R. Keohan
SAP Workflow Specialist
MIT Lincoln Laboratory
244 Wood Street, LI-200
Lexington, MA. 02420
Ph: 781-981-3561
Fax: 781-981-1607
keohan at LL.MIT.EDU
-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Mike Pokraka
Sent: Wednesday, March 12, 2008 9:43 AM
To: SAP Workflow Users' Group
Subject: RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
On Tue, March 11, 2008 1:59 pm, Keohan, Susan wrote:
...
> (I'm not using swi2_adm1 in my house).
>
HUH??? Scary!
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
------------------------------
Message: 5
Date: Wed, 12 Mar 2008 08:01:45 -0700 (PDT)
From: Shai Eyal <shai.eyal at yahoo.com>
Subject: Re: Issue with the Rejection reason in Portal. (Srivastava,
Pawan
To: sap-wug at mit.edu
Message-ID: <124699.75785.qm at web59112.mail.re1.yahoo.com>
Content-Type: text/plain; charset="utf-8"
Dear Srivastava,
I did that by adding new method which calls function module SAVE_TEXT
and set it as secondary method in the decision step.
You could also have three options in the decision, like: Approve,
reject, reject and comment.
Only after reject and comment you can create task which calls this
method.
Good luck
Regards,
Shai Eyal
SAP Logistics senior consultant
SAP Workflow specialist
Mobile: 972-52-5816633
----- Original Message ----
From: "sap-wug-request at mit.edu" <sap-wug-request at mit.edu>
To: sap-wug at mit.edu
Sent: Wednesday, March 12, 2008 14:36:26
Subject: SAP-WUG Digest, Vol 40, Issue 26
Send SAP-WUG mailing list submissions to
sap-wug at mit.edu
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.mit.edu/mailman/listinfo/sap-wug
or, via email, send a message with subject or body 'help' to
sap-wug-request at mit.edu
You can reach the person managing the list at
sap-wug-owner at mit.edu
When replying, please edit your Subject line so it is more specific than
"Re: Contents of SAP-WUG digest..."
Today's Topics:
1. RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
(Keohan, Susan)
2. Issue with the Rejection reason in Portal. (Srivastava, Pawan)
3. I am now on Refriendz! (ashish nagpal)
4. Re: I am now on Refriendz! (Florin Wach (gmx))
5. RE: I am now on Refriendz! APOLOGIES. (Keohan, Susan)
6. RE: Workflow Pop-up not displaying (david.s.dittmer at accenture.com)
----------------------------------------------------------------------
Message: 1
Date: Tue, 11 Mar 2008 19:15:05 -0400
From: "Keohan, Susan" <keohan at ll.mit.edu>
Subject: RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
<E74DD9A4E0338F4F98DBE83861654A0C06B112E85E at LLE2K7-BE01.mitll.ad.local>
Content-Type: text/plain; charset="us-ascii"
Dang! I thought I could answer without consulting the Book! Shame on
me.
I personally have not used SWI2_ADM1. SWI2_DIAG meets all our needs,
but then again, we normally suss out all the possible agents prior to
the actual workitem, although in some cases, we do use PFAC roles as
well. So if the 'prior' step can't find agents, we force it to error
out, catch it in swi2_diag, and make corrections at that point, whether
it is changing the container, or restarting the WF. I have tried very
hard - and mostly succeeded - in NOT forwarding workitems. Don't want
my sticky fingerprints on the log if I can help it.
Just my 2p, as some would say ;)
Cheers,
Sue
---
Susan R. Keohan
SAP Workflow Specialist
MIT Lincoln Laboratory
244 Wood Street
LI-200
Lexington, MA. 02420
Phone: 781-981-3561
Fax: 781-981-1607
keohan at ll.mit.edu
-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Paul.Bakker at osr.treasury.qld.gov.au
Sent: Tuesday, March 11, 2008 6:53 PM
To: SAP Workflow Users' Group
Subject: RE: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
Sue,
Hold on a minute.. on page 280 of The Book, it says that if no
responsible agents are found AND no terminate flag is set, then (4.6C
and above) "the workitem is either assigned to the workflow
adminsitrator or orphaned
- ie it stays in ready status with no agents assigned"
It then goes on to give a Tip :
"transaction SWi2_ADM1 lets you view and correct orphaned workitems"
Eh? My experience here is that 'orphaned' workitems (as described above)
do not appear in SWI2_ADM1.
They only appear in that list if they have no *possible* agents.
This is a shame, as SWi2_ADM1 allows you to forward workitems and redo
agent rules, while SWi2_DIAG does not.
(We are on Basis 6.20.)
cheers
Paul
"Keohan, Susan"
<keohan at ll.mit.ed
u> To
Sent by: "SAP Workflow Users' Group"
sap-wug-bounces at m <sap-wug at mit.edu>
it.edu cc
Subject
11/03/2008 11:59 RE: agent errors go to SWI2_ADM1
PM instead of SWI2_DIAG
Please respond to
"SAP Workflow
Users' Group"
<sap-wug at mit.edu>
Hi Paul,
I think that you've answered your own question. That with the task
marked as 'General'... All users in the system can process it, so it
can't be found in swi2_adm1. Can you test this out by switching from
General Task, and confirm or deny my suspicion ?
(I'm not using swi2_adm1 in my house).
Cheers,
Sue
----
Susan R. Keohan
SAP Workflow Specialist
MIT Lincoln Laboratory
244 Wood Street, LI-200
Lexington, MA. 02420
Ph: 781-981-3561
Fax: 781-981-1607
keohan at LL.MIT.EDU
-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Paul.Bakker at osr.treasury.qld.gov.au
Sent: Monday, March 10, 2008 3:19 AM
To: SAP-WUG at mit.edu
Subject: agent errors go to SWI2_ADM1 instead of SWI2_DIAG
My Dear WUG'ers,
CRM 4.0, Basis 6.20
I have a workitem that uses a PFAC rule to determine the responsible
agents. I have set the flag 'terminate if rule resolution has no
result', so that if something goes wrong with the rule, the workitem
will end up in SWI2_DIAG.
This works as expected, but I am wondering how I can make the workitem
appear in SWI2_ADM1 instead ('Workitems without Agents').
I thought it was simply a matter of removing the 'Terminate' flag in
PFAC. This certainly prevents it from going into error, but surprisingly
it does not then appear in SWI2_ADM1.
[And yes I have checked (in the workflow log) that the set of
responsible agents is indeed empty].
So my question is: how do you arrange for workitems to end up in
SWi2_ADM1?
The particular TS task I am using has the attribute 'General Task'.
thanks
Paul
************************************************************************
************************************************************************
******
Only an individual or entity who is intended to be a recipient of this
e-mail may access or use the information contained in this e-mail or any
of its attachments. Opinions contained in this e-mail or any of its
attachments do not necessarily reflect the opinions of Queensland
Treasury.
The contents of this e-mail and any attachments are confidential and may
be legally privileged and the subject of copyright. If you have
received this e-mail in error, please notify Queensland Treasury
immediately and erase all copies of the e-mail and the attachments.
Queensland Treasury uses virus scanning software. However, it is not
liable for viruses present in this e-mail or in any attachment.
************************************************************************
************************************************************************
******
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
------------------------------
Message: 2
Date: Wed, 12 Mar 2008 16:03:26 +1100
From: "Srivastava, Pawan" <Pawan.Srivastava at bhpbilliton.com>
Subject: Issue with the Rejection reason in Portal.
To: <sap-wug at mit.edu>
Message-ID:
<E105F90D97C3614A8FE0D57F1E5F7794683E6C at ENTMEL-XCH05.apac.ent.bhpbillito
n.net>
Content-Type: text/plain; charset="us-ascii"
Hello WF experts,
We have a requirement which incorporates the rejection reason after a
decision and should works both via the Portal and SAPGui i.e.
Synchronous Dialog Chains processing is required to enter reason for an
action.
Work Done:
1. User decision to either approve or reject the medical service by the
approver. (Standard Method)....Once Rejected
2. Dialogue task for reason. (Customized method)
Working fine through SAPGui.
Issue:
When the reject option is selected on the workflow item in the portal a
separate 'Get Reject Reason' item is created which takes the user to an
ITS transaction that allows the entry of a rejection reason.
This is not only a usability issue but if the user does not perform this
step the workflow stops, so the solution needs to take the user directly
to the rejection reason transaction (as it does in R/3).
Appreciate if you could please share your experience to resolve the
above issue.
Thanks & Regards,
Pawan Srivastava
SAP WF Consultant
CSC Australia
Mb: +61.431.744.995
This message and any attached files may contain information that is
confidential and/or subject of legal privilege intended only for use by
the intended recipient. If you are not the intended recipient or the
person responsible for delivering the message to the intended recipient,
be advised that you have received this message in error and that any
dissemination, copying or use of this message or attachment is strictly
forbidden, as is the disclosure of the information therein. If you have
received this message in error please notify the sender immediately and
delete the message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.mit.edu/pipermail/sap-wug/attachments/20080312/307ca2fa/a
ttachment-0001.htm
------------------------------
Message: 3
Date: Wed, 12 Mar 2008 06:34:06 +0000
From: ashish nagpal <invitation at refriendz.com>
Subject: I am now on Refriendz!
To: sap-wug at mit.edu
Message-ID: <5e352557018cd763d793433a72155887 at www.refriendz.com>
Content-Type: text/plain; charset="UTF-8"
Hi!
I would like to invite you to visit my Refriendz page and see my latest
photos.
In order to visit my space, you must go to:
http://www.refriendz.com/?do=Login.Invite&rid=ashu4u&email=sap-wug@mit.e
du
(If this link does not work, please copy and paste it into your browser
or go to www.refriendz.com and enter 'ashu4u' as Invitation ID to Login
to the web site.)
P.S. Refriendz is Invitation-Only, so do not miss your chance to visit
my page!
Cheers!
ashish
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unsubscribe: to opt out of ALL future emails from Refriendz, visit:
http://www.refriendz.com/?do=Login.RemoveEntry&email=sap-wug@mit.edu
Please do not reply directly to this email. This mailbox is not
monitored and you will not receive a response.
Refriendz Limited, PO BOX 1184, Luton, Bedfordshire, LU1 9AT, UK.
------------------------------
Message: 4
Date: Wed, 12 Mar 2008 06:51:04 +0100
From: "Florin Wach (gmx)" <florin.wach at gmx.net>
Subject: Re: I am now on Refriendz!
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID: <001401c88405$1025e140$09010a0a at SI.local>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
*** I have removed the email of the SAP-WUG from that mailing list at
refriendz.
WUG: Please remove invitation at refriendz.com
P.S. With flickr.com you could share your photos without having anyone
to register on a website
----- Original Message -----
From: "ashish nagpal" <invitation at refriendz.com>; "ashish nagpal"
<nameisashish at gmail.com>
To: <sap-wug at mit.edu>
Sent: Wednesday, March 12, 2008 7:34 AM
Subject: I am now on Refriendz!
> Hi!
> I would like to invite you to visit my Refriendz page and see my
latest
> photos.
>
> In order to visit my space, you must go to:
>
http://www.refriendz.com/?do=Login.Invite&rid=ashu4u&email=sap-wug@mit.e
du
>
> (If this link does not work, please copy and paste it into your
browser or
> go to www.refriendz.com and enter 'ashu4u' as Invitation ID to Login
to
> the web site.)
>
> P.S. Refriendz is Invitation-Only, so do not miss your chance to visit
my
> page!
>
> Cheers!
>
> ashish
>
>
>
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Unsubscribe: to opt out of ALL future emails from Refriendz, visit:
> http://www.refriendz.com/?do=Login.RemoveEntry&email=sap-wug@mit.edu
>
> Please do not reply directly to this email. This mailbox is not
monitored
> and you will not receive a response.
>
> Refriendz Limited, PO BOX 1184, Luton, Bedfordshire, LU1 9AT, UK.
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
------------------------------
Message: 5
Date: Wed, 12 Mar 2008 09:30:31 -0400
From: "Keohan, Susan" <keohan at ll.mit.edu>
Subject: RE: I am now on Refriendz! APOLOGIES.
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
<E74DD9A4E0338F4F98DBE83861654A0C06B112E8E5 at LLE2K7-BE01.mitll.ad.local>
Content-Type: text/plain; charset="us-ascii"
All,
Perhaps Ashish only wanted to be a friend, but I have removed him from
the list. There is no member 'invitation at refriendz.com' subscribed to
the list.
Please be aware that although we are a friendly group, nobody wants to
get spammed here. That's why there messages from non-subscribers are
sent to the moderator for validation. And there is absolutely no good
will generated if you send this type of message to the group.
Among other types of messages that are prohibited are:
1) Requests for answers to SAP Certification Exams
2) Requests for jobs
3) Requests for resources
4) Advertisements - although exceptions are made in the case of new
materials that can help us all learn more, or educational conferences.
If you ever feel that the integrity of the list has been compromised, I
encourage you to send me email at KEOHAN at LL.MIT.EDU
Regards,
Sue
----
Susan R. Keohan
SAP Workflow Specialist
MIT Lincoln Laboratory
244 Wood Street, LI-200
Lexington, MA. 02420
Ph: 781-981-3561
Fax: 781-981-1607
keohan at LL.MIT.EDU
-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Florin Wach (gmx)
Sent: Wednesday, March 12, 2008 1:51 AM
To: SAP Workflow Users' Group
Subject: Re: I am now on Refriendz!
*** I have removed the email of the SAP-WUG from that mailing list at
refriendz.
WUG: Please remove invitation at refriendz.com
P.S. With flickr.com you could share your photos without having anyone
to
register on a website
----- Original Message -----
From: "ashish nagpal" <invitation at refriendz.com>; "ashish nagpal"
<nameisashish at gmail.com>
To: <sap-wug at mit.edu>
Sent: Wednesday, March 12, 2008 7:34 AM
Subject: I am now on Refriendz!
> Hi!
> I would like to invite you to visit my Refriendz page and see my
latest
> photos.
>
> In order to visit my space, you must go to:
>
http://www.refriendz.com/?do=Login.Invite&rid=ashu4u&email=sap-wug@mit.e
du
>
> (If this link does not work, please copy and paste it into your
browser or
> go to www.refriendz.com and enter 'ashu4u' as Invitation ID to Login
to
> the web site.)
>
> P.S. Refriendz is Invitation-Only, so do not miss your chance to visit
my
> page!
>
> Cheers!
>
> ashish
>
>
>
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Unsubscribe: to opt out of ALL future emails from Refriendz, visit:
> http://www.refriendz.com/?do=Login.RemoveEntry&email=sap-wug@mit.edu
>
> Please do not reply directly to this email. This mailbox is not
monitored
> and you will not receive a response.
>
> Refriendz Limited, PO BOX 1184, Luton, Bedfordshire, LU1 9AT, UK.
>
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
------------------------------
Message: 6
Date: Wed, 12 Mar 2008 08:35:08 -0500
From: <david.s.dittmer at accenture.com>
Subject: RE: Workflow Pop-up not displaying
To: <sap-wug at mit.edu>
Message-ID:
<833BF50E60C6104CA97181992DC1049002A7B8F4 at AMRXM2101.dir.svc.accenture.co
m>
Content-Type: text/plain; charset="us-ascii"
Hello Mark,
Thank you for replying. I have solved the issue by setting a priority
'1' as a hardcode on the event container. This flowed through to work
items attributes and changed the priority to express. In addition I set
the agent determination to SAP rule AC30000012 which sent the pop-up to
all users on the distribution list.
regards
David.S.Dittmer
________________________________
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Mark Pyc
Sent: Tuesday, March 11, 2008 5:49 PM
To: SAP Workflow Users' Group
Subject: Re: Workflow Pop-up not displaying
G'day David,
I've had problems (long ago) with this that related to automatic
forwarding settings at user level. Have you tried testing with a few
different users? I believe there is also a system wide parameter that
can disable the pop-ups, but this is really just vague recollection...
Not very helpful I know.
Play with some different users and have a look at the automatic
forwarding settings in SBWP or SO16 (is it?)
If you create an express email message for a user, do they get a pop-up?
If not then you probably need to look at more general issues than your
WF set up.
Good luck,
Mark
On 22/02/2008, david.s.dittmer at accenture.com
<david.s.dittmer at accenture.com> wrote:
Workflow experts,
My workflow needs to display a pop-up when it arrives in the workflow
inbox. I researched the site and found references to setting the
priority to 1 in the activity step. This I understood to mean that I
needed to go to the task in the activity step and under the tab-strip
OTHER change the priority.
However this does not work...is there something that I am missing here
David.S.Dittmer
This message is for the designated recipient only and may contain
privileged, proprietary, or otherwise private information. If you have
received it in error, please notify the sender immediately and delete
the original. Any other use of the email by you is prohibited.
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
This message is for the designated recipient only and may contain
privileged, proprietary, or otherwise private information. If you have
received it in error, please notify the sender immediately and delete
the original. Any other use of the email by you is prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.mit.edu/pipermail/sap-wug/attachments/20080312/48c279b9/a
ttachment.htm
------------------------------
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
End of SAP-WUG Digest, Vol 40, Issue 26
***************************************
Send instant messages to your online friends
http://uk.messenger.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.mit.edu/pipermail/sap-wug/attachments/20080312/6a2a00ee/a
ttachment.htm
------------------------------
_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug
End of SAP-WUG Digest, Vol 40, Issue 27
***************************************
This message and any attached files may contain information that is confidential and/or subject of legal privilege intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error and that any dissemination, copying or use of this message or attachment is strictly forbidden, as is the disclosure of the information therein. If you have received this message in error please notify the sender immediately and delete the message.
More information about the SAP-WUG
mailing list