SAP-WUG Digest, Vol 39, Issue 78

Thu Feb 28 11:40:33 EST 2008

Sue,

  Since you are checking the condition in a loop ,i think you have to do a container operation  with assign "after "the method you are calling for getting T or F   of the result   element and then check for the  Condition(the workflow container used in the container operation) in the condition step. it should work.

for exampe!

method get_result.

if 
swc_set_element container 'RESULTt'  'T'.
else.
swc_Set_element container 'RESULT' 'F'.

endmethod.

Do a container operation in the wf definition.

set the  workflow container  for EX..FLAG = RESULT(from task container)

and then in the next step check for the 
WF container FLAG in the condition.

Please let me know if this works..

Thanks,

yogesh.> From: sap-wug-request at mit.edu> Subject: SAP-WUG Digest, Vol 39, Issue 78> To: sap-wug at mit.edu> Date: Thu, 28 Feb 2008 10:31:04 -0500> > Send SAP-WUG mailing list submissions to> sap-wug at mit.edu> > To subscribe or unsubscribe via the World Wide Web, visit> http://mailman.mit.edu/mailman/listinfo/sap-wug> or, via email, send a message with subject or body 'help' to> sap-wug-request at mit.edu> > You can reach the person managing the list at> sap-wug-owner at mit.edu> > When replying, please edit your Subject line so it is more specific> than "Re: Contents of SAP-WUG digest..."> > > Today's Topics:> > 1. RE: Condition step not working in Workflow (Sue Doughty)> 2. RE: Condition step not working in Workflow (Sue Doughty)> 3. RE: Condition step not working in Workflow (Sample, Rick)> > > ----------------------------------------------------------------------> > Message: 1> Date: Thu, 28 Feb 2008 08:23:51 -0500> From: "Sue Doughty" <Sue.Doughty at odfl.com>> Subject: RE: Condition step not working in Workflow> To: "SAP Workflow Users' Group" <sap-wug at mit.edu>> Message-ID:> <082C942F46528B44B5463D3C2A1FF0F40E5BB199 at corp-m-exch2.corp.odfl.com>> Content-Type: text/plain; charset="us-ascii"> > Hi Mike,> > The step actually completes. The next step (condition checking for T or> F) does not start if the result of the method is F, but the condition is> executed if the result of the method is T.> > I'll give your suggestion a try.> > Regards,> Sue T. Doughty> SAP Workflow Specialist> Old Dominion Freight Line, Inc.> 500 Old Dominion Way> Thomasville, NC 27360> Phone: (336) 822-5189> Toll Free (800 ) 432-6335, ext. 5189> Email: sue.doughty at odfl.com> -----Original Message-----> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf> Of Mike Pokraka> Sent: Thursday, February 28, 2008 7:54 AM> To: SAP Workflow Users' Group> Subject: RE: Condition step not working in Workflow> > Just to confirm the obvious: Does the step actually complete? (Status> Completed)> If it just completes and the next step doesn't start then your WF> definition couldbe corrupt. Put the two steps into a test WF and see if> that works.> > On Wed, February 27, 2008 6:20 pm, Sue Doughty wrote:> > Hi Mike,> >> > I changed the data type to SY-INPUT and still get the same results.> >> > Thank you for the suggestion though. I'm willing to try anything. I> > hope that it is not something so simple that I'll feel really stupid> > when I find it. :-)> >> > Regards,> > Sue T. Doughty> > SAP Workflow Specialist> > Old Dominion Freight Line, Inc.> > 500 Old Dominion Way> > Thomasville, NC 27360> > Phone: (336) 822-5189> > Toll Free (800 ) 432-6335, ext. 5189> > Email: sue.doughty at odfl.com> >> > -----Original Message-----> > From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On> Behalf> > Of Mike Pokraka> > Sent: Wednesday, February 27, 2008 12:13 PM> > To: SAP Workflow Users' Group> > Subject: RE: Condition step not working in Workflow> >> > Hmm, not too sure then. I thought I'd mention as it would be worth> > checking. Also make sure your data type is valid for the values. Try> > changing it to SY-INPUT just to make sure.> >> > On Wed, February 27, 2008 4:11 pm, Sue Doughty wrote:> >> Hi Mike,> >>> >> Thanks for your reply.> >>> >> I am not using a result parameter even though I tried that when it> did> >> not work the way I had it at first. Neither way works. I can see in> >> the workflow log that my export parameter (ImageFound) is being> >> populated with the correct 'T' or 'F' value, but the Results> > processing> >> step is not being executed with an F value - it only executes when> the> >> export parameter contains a 'T' value.> >>> >> I can't use a virtual attribute because the input parameters to the> >> method change with each call to the method (i.e., doctype and> >> imagedate).> >>> >> Regards,> >> Sue T. Doughty> >> SAP Workflow Specialist> >> Old Dominion Freight Line, Inc.> >> 500 Old Dominion Way> >> Thomasville, NC 27360> >> Phone: (336) 822-5189> >> Toll Free (800 ) 432-6335, ext. 5189> >> Email: sue.doughty at odfl.com> >> -----Original Message-----> >> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On> > Behalf> >> Of Mike Pokraka> >> Sent: Wednesday, February 27, 2008 10:44 AM> >> To: SAP Workflow Users' Group> >> Subject: Re: Condition step not working in Workflow> >>> >> Hi Sue,> >> Are you using a standard return parameter or a result parameter?> >> ("Result> >> parameter" checkbox on your method properties).> >> Result parameters behave differently, T/F must be defined within the> >> data> >> dictionary and become separate outcomes of the method.> >> Also, perhaps a virtual attribute might be easier if this is all that> >> the> >> method does...> >>> >> Cheers,> >> Mike> >>> >> On Tue, February 26, 2008 5:06 pm, Sue Doughty wrote:> >>> We are on 4.7, ECC 6.0> >>>> >>>> >>>> >>> I have a sub-workflow that executes a loop until a result flag is> set> >> to> >>> T. It executes a method that reads a table with some information.> > If> >>> the record is found, the result is set to T, if not it is set to F> > and> >>> the result container is set in the method. The next step is a> >> condition> >>> to check the result. If T, the loop and sub-workflow are completed,> >> if> >>> F, it waits and tries again after five minutes.> >>>> >>>> >>>> >>> My problem: If the method executes and the result is T, the> workflow> >>> works as designed. If the method returns a result of F, the> workflow> >>> stops at that step and does not move to the condition step to check> >> the> >>> result.> >>>> >>>> >>>> >>> I can see that the method is returning the result container. If the> >>> Result = T, I can see that the Result container is sent back to the> >>> sub-workflow. When I look at the step in the log, it says that the> >>> background item was created, started, work item processing is> > complete> >>> and the result processing is done with no errors.> >>>> >>>> >>>> >>> If the Result is F, I can see that the method is returning the> result> >>> container, but the workflow container does NOT get set to the> Result.> >>> When I look at the step in the log, it says that the background item> >> was> >>> created; started and work item processing is complete with no> errors,> >>> BUT the Result Processing is NOT done.> >>>> >>>> >>>> >>> What am I missing? Why is the Result processing being done for one> >>> result but not the other?> >>>> >>>> >>>> >>> Regards,> >>>> >>> Sue T. Doughty> >>>> >>> SAP Workflow Specialist> >>>> >>> Old Dominion Freight Line, Inc.> >>>> >>> 500 Old Dominion Way> >>>> >>> Thomasville, NC 27360> >>>> >>> Phone: (336) 822-5189> >>>> >>> Toll Free (800 ) 432-6335, ext. 5189> >>>> >>> Email: sue.doughty at odfl.com> >>>> >>>> >>>> >>> ****************************> >>> CONFIDENTIALITY NOTICE: The information contained in this message> may> >> be> >>> confidential, privileged, proprietary, or otherwise legally exempt> >> from> >>> disclosure. If the reader of this message is not the intended> >> recipient,> >>> or an employee or agent responsible for delivering this message to> > the> >>> intended recipient, you are hereby notified that you are not> >> authorized to> >>> read, print, retain, copy or disseminate this message, any part of> > it,> >> or> >>> any attachments. If you have received this message in error, please> >> delete> >>> this message and any attachments from your system without reading> the> >>> content and notify the sender immediately of the inadvertent> >> transmission.> >>> Thank you for your cooperation.> >>>> >>> _______________________________________________> >>> SAP-WUG mailing list> >>> SAP-WUG at mit.edu> >>> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>>> >>> >>> >> _______________________________________________> >> SAP-WUG mailing list> >> SAP-WUG at mit.edu> >> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>> >>> >> ****************************> >> CONFIDENTIALITY NOTICE: The information contained in this message may> > be> >> confidential, privileged, proprietary, or otherwise legally exempt> > from> >> disclosure. If the reader of this message is not the intended> > recipient,> >> or an employee or agent responsible for delivering this message to> the> >> intended recipient, you are hereby notified that you are not> > authorized to> >> read, print, retain, copy or disseminate this message, any part of> it,> > or> >> any attachments. If you have received this message in error, please> > delete> >> this message and any attachments from your system without reading the> >> content and notify the sender immediately of the inadvertent> > transmission.> >> Thank you for your cooperation.> >>> >> _______________________________________________> >> SAP-WUG mailing list> >> SAP-WUG at mit.edu> >> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>> >> >> > _______________________________________________> > SAP-WUG mailing list> > SAP-WUG at mit.edu> > http://mailman.mit.edu/mailman/listinfo/sap-wug> >> >> > ****************************> > CONFIDENTIALITY NOTICE: The information contained in this message may> be> > confidential, privileged, proprietary, or otherwise legally exempt> from> > disclosure. If the reader of this message is not the intended> recipient,> > or an employee or agent responsible for delivering this message to the> > intended recipient, you are hereby notified that you are not> authorized to> > read, print, retain, copy or disseminate this message, any part of it,> or> > any attachments. If you have received this message in error, please> delete> > this message and any attachments from your system without reading the> > content and notify the sender immediately of the inadvertent> transmission.> > Thank you for your cooperation.> >> > _______________________________________________> > SAP-WUG mailing list> > SAP-WUG at mit.edu> > http://mailman.mit.edu/mailman/listinfo/sap-wug> >> > > _______________________________________________> SAP-WUG mailing list> SAP-WUG at mit.edu> http://mailman.mit.edu/mailman/listinfo/sap-wug> > > ****************************> CONFIDENTIALITY NOTICE: The information contained in this message may be confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. Thank you for your cooperation.> > > > ------------------------------> > Message: 2> Date: Thu, 28 Feb 2008 09:53:03 -0500> From: "Sue Doughty" <Sue.Doughty at odfl.com>> Subject: RE: Condition step not working in Workflow> To: "SAP Workflow Users' Group" <sap-wug at mit.edu>> Message-ID:> <082C942F46528B44B5463D3C2A1FF0F40E5BB327 at corp-m-exch2.corp.odfl.com>> Content-Type: text/plain; charset="us-ascii"> > Hi Mike,> > I tried creating the dummy method that just takes in the T or F and> returns the T or F that was sent in like you said....got same results.> > I tried creating a new workflow with the new dummy task and a new> condition step (that reads the workflow container that is updated from> the method looking for the T or F)....got same results.> > I tried change T and F to Y and N....got same results.> > I can see the output container from the method in the workflow log.> But, if the condition is false, the output container from the method is> not returned to the workflow container and the condition step is not> executed. If the condition is true, the output container from the> method is returned to the workflow container and the condition step is> executed. > > I have an OSS note open with SAP. I can see where they have come into> the system and tested it, but as of yet, have not gotten a response from> them.> > I am totally befuddled!!!> > Regards,> Sue T. Doughty> SAP Workflow Specialist> Old Dominion Freight Line, Inc.> 500 Old Dominion Way> Thomasville, NC 27360> Phone: (336) 822-5189> Toll Free (800 ) 432-6335, ext. 5189> Email: sue.doughty at odfl.com> > -----Original Message-----> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf> Of Mike Pokraka> Sent: Thursday, February 28, 2008 7:54 AM> To: SAP Workflow Users' Group> Subject: RE: Condition step not working in Workflow> > Just to confirm the obvious: Does the step actually complete? (Status> Completed)> If it just completes and the next step doesn't start then your WF> definition couldbe corrupt. Put the two steps into a test WF and see if> that works.> > On Wed, February 27, 2008 6:20 pm, Sue Doughty wrote:> > Hi Mike,> >> > I changed the data type to SY-INPUT and still get the same results.> >> > Thank you for the suggestion though. I'm willing to try anything. I> > hope that it is not something so simple that I'll feel really stupid> > when I find it. :-)> >> > Regards,> > Sue T. Doughty> > SAP Workflow Specialist> > Old Dominion Freight Line, Inc.> > 500 Old Dominion Way> > Thomasville, NC 27360> > Phone: (336) 822-5189> > Toll Free (800 ) 432-6335, ext. 5189> > Email: sue.doughty at odfl.com> >> > -----Original Message-----> > From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On> Behalf> > Of Mike Pokraka> > Sent: Wednesday, February 27, 2008 12:13 PM> > To: SAP Workflow Users' Group> > Subject: RE: Condition step not working in Workflow> >> > Hmm, not too sure then. I thought I'd mention as it would be worth> > checking. Also make sure your data type is valid for the values. Try> > changing it to SY-INPUT just to make sure.> >> > On Wed, February 27, 2008 4:11 pm, Sue Doughty wrote:> >> Hi Mike,> >>> >> Thanks for your reply.> >>> >> I am not using a result parameter even though I tried that when it> did> >> not work the way I had it at first. Neither way works. I can see in> >> the workflow log that my export parameter (ImageFound) is being> >> populated with the correct 'T' or 'F' value, but the Results> > processing> >> step is not being executed with an F value - it only executes when> the> >> export parameter contains a 'T' value.> >>> >> I can't use a virtual attribute because the input parameters to the> >> method change with each call to the method (i.e., doctype and> >> imagedate).> >>> >> Regards,> >> Sue T. Doughty> >> SAP Workflow Specialist> >> Old Dominion Freight Line, Inc.> >> 500 Old Dominion Way> >> Thomasville, NC 27360> >> Phone: (336) 822-5189> >> Toll Free (800 ) 432-6335, ext. 5189> >> Email: sue.doughty at odfl.com> >> -----Original Message-----> >> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On> > Behalf> >> Of Mike Pokraka> >> Sent: Wednesday, February 27, 2008 10:44 AM> >> To: SAP Workflow Users' Group> >> Subject: Re: Condition step not working in Workflow> >>> >> Hi Sue,> >> Are you using a standard return parameter or a result parameter?> >> ("Result> >> parameter" checkbox on your method properties).> >> Result parameters behave differently, T/F must be defined within the> >> data> >> dictionary and become separate outcomes of the method.> >> Also, perhaps a virtual attribute might be easier if this is all that> >> the> >> method does...> >>> >> Cheers,> >> Mike> >>> >> On Tue, February 26, 2008 5:06 pm, Sue Doughty wrote:> >>> We are on 4.7, ECC 6.0> >>>> >>>> >>>> >>> I have a sub-workflow that executes a loop until a result flag is> set> >> to> >>> T. It executes a method that reads a table with some information.> > If> >>> the record is found, the result is set to T, if not it is set to F> > and> >>> the result container is set in the method. The next step is a> >> condition> >>> to check the result. If T, the loop and sub-workflow are completed,> >> if> >>> F, it waits and tries again after five minutes.> >>>> >>>> >>>> >>> My problem: If the method executes and the result is T, the> workflow> >>> works as designed. If the method returns a result of F, the> workflow> >>> stops at that step and does not move to the condition step to check> >> the> >>> result.> >>>> >>>> >>>> >>> I can see that the method is returning the result container. If the> >>> Result = T, I can see that the Result container is sent back to the> >>> sub-workflow. When I look at the step in the log, it says that the> >>> background item was created, started, work item processing is> > complete> >>> and the result processing is done with no errors.> >>>> >>>> >>>> >>> If the Result is F, I can see that the method is returning the> result> >>> container, but the workflow container does NOT get set to the> Result.> >>> When I look at the step in the log, it says that the background item> >> was> >>> created; started and work item processing is complete with no> errors,> >>> BUT the Result Processing is NOT done.> >>>> >>>> >>>> >>> What am I missing? Why is the Result processing being done for one> >>> result but not the other?> >>>> >>>> >>>> >>> Regards,> >>>> >>> Sue T. Doughty> >>>> >>> SAP Workflow Specialist> >>>> >>> Old Dominion Freight Line, Inc.> >>>> >>> 500 Old Dominion Way> >>>> >>> Thomasville, NC 27360> >>>> >>> Phone: (336) 822-5189> >>>> >>> Toll Free (800 ) 432-6335, ext. 5189> >>>> >>> Email: sue.doughty at odfl.com> >>>> >>>> >>>> >>> ****************************> >>> CONFIDENTIALITY NOTICE: The information contained in this message> may> >> be> >>> confidential, privileged, proprietary, or otherwise legally exempt> >> from> >>> disclosure. If the reader of this message is not the intended> >> recipient,> >>> or an employee or agent responsible for delivering this message to> > the> >>> intended recipient, you are hereby notified that you are not> >> authorized to> >>> read, print, retain, copy or disseminate this message, any part of> > it,> >> or> >>> any attachments. If you have received this message in error, please> >> delete> >>> this message and any attachments from your system without reading> the> >>> content and notify the sender immediately of the inadvertent> >> transmission.> >>> Thank you for your cooperation.> >>>> >>> _______________________________________________> >>> SAP-WUG mailing list> >>> SAP-WUG at mit.edu> >>> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>>> >>> >>> >> _______________________________________________> >> SAP-WUG mailing list> >> SAP-WUG at mit.edu> >> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>> >>> >> ****************************> >> CONFIDENTIALITY NOTICE: The information contained in this message may> > be> >> confidential, privileged, proprietary, or otherwise legally exempt> > from> >> disclosure. If the reader of this message is not the intended> > recipient,> >> or an employee or agent responsible for delivering this message to> the> >> intended recipient, you are hereby notified that you are not> > authorized to> >> read, print, retain, copy or disseminate this message, any part of> it,> > or> >> any attachments. If you have received this message in error, please> > delete> >> this message and any attachments from your system without reading the> >> content and notify the sender immediately of the inadvertent> > transmission.> >> Thank you for your cooperation.> >>> >> _______________________________________________> >> SAP-WUG mailing list> >> SAP-WUG at mit.edu> >> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>> >> >> > _______________________________________________> > SAP-WUG mailing list> > SAP-WUG at mit.edu> > http://mailman.mit.edu/mailman/listinfo/sap-wug> >> >> > ****************************> > CONFIDENTIALITY NOTICE: The information contained in this message may> be> > confidential, privileged, proprietary, or otherwise legally exempt> from> > disclosure. If the reader of this message is not the intended> recipient,> > or an employee or agent responsible for delivering this message to the> > intended recipient, you are hereby notified that you are not> authorized to> > read, print, retain, copy or disseminate this message, any part of it,> or> > any attachments. If you have received this message in error, please> delete> > this message and any attachments from your system without reading the> > content and notify the sender immediately of the inadvertent> transmission.> > Thank you for your cooperation.> >> > _______________________________________________> > SAP-WUG mailing list> > SAP-WUG at mit.edu> > http://mailman.mit.edu/mailman/listinfo/sap-wug> >> > > _______________________________________________> SAP-WUG mailing list> SAP-WUG at mit.edu> http://mailman.mit.edu/mailman/listinfo/sap-wug> > > ****************************> CONFIDENTIALITY NOTICE: The information contained in this message may be confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. Thank you for your cooperation.> > > > ------------------------------> > Message: 3> Date: Thu, 28 Feb 2008 09:29:50 -0600> From: "Sample, Rick" <Rick.Sample at gbe.com>> Subject: RE: Condition step not working in Workflow> To: "SAP Workflow Users' Group" <sap-wug at mit.edu>> Message-ID:> <1897E92A96C47648A6574CB9A51C6407055805CD at SEBEV1PW.graybar.com>> Content-Type: text/plain; charset="us-ascii"> > Hi Sue (a.k.a. Ms. Befuddled. LOL)> > This is interesting. Before you through in the towel do you mind> checking a few things?> > 1: > Try changing your data to just CHAR1 type for all values in your test WF> / method, > GET_ELEMENT_CONTAINER the values to same data type in method at> beginning of method, (inspect that you can actually get values)> SET_ELEMENT_CONTAINER to same on export, (inspect you are actually> setting the values)> ensure all bindings are setup.> > 2:> You are in ECC6? If so, the below may be a long shot, but worth> remembering anyway. Because I had a similar sounding issue on conversion> from 4.6c to ECC6. Bindings have new options. (Nice to know after the> fact eh!)> > 4.6c by default, if you have bindings setup for task->WF but DO NOT do a> SET_ELEMENT_CONTAINER in method it will NOT overwrite your WF values> even though the binding are setup. > * This, in my option, is the way it should have worked in the first> place! You have a binding with null value...it should set null values!> Period!> Developers job to explicitly GET/SET in the code. (Not bindings!) Just> my .02 worth. > > ECC6, by default, WILL overwrite empty / initial values unless you> change the bindings to ignore empty/initial values.> > I do not like the extra options on bindings. Just a personal preference> I suppose. So, what I now do is GET/SET all values in/out of> task-method. > That way, I don't have to squirrel through code AND bindings to figure> out what is getting passed back if empty / initial values. If I want to> pass back an empty value, I set the value to empty in the method. I find> it more confusing to use the extra binding options. (Also, you can't add> a "comment" on binding to remind yourself as to the whys, as you can in> code)> > 3:> If using ECC6, verify you are have all same data types for the values> you are passing around. > I know in 4.6c you can create the containers to a data type, but it> always pass char 255 strings no matter what. i.e. if you import via> GET_ELEMENT_CONTAINER, you got a string. Not a type data value you set> in WF or Task. (Can't remember if ECC6 does this. Don't have it in front> of me at the moment!)> > 4:> Verify that the method is not terminating on your F condition before it> gets a chance to set the value. > > If these are not the issue, and you would like more assistance, feel> free to ask. (I have an inch of breathing room to spare today!)> > Rick Sample> SAP Business Workflow Developer> Graybar, Inc.> 11885 Lackland Dr.> St. Louis, MO. 63146> 314-573-5822> > -----Original Message-----> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf> Of Sue Doughty> Sent: Thursday, February 28, 2008 8:53 AM> To: SAP Workflow Users' Group> Subject: RE: Condition step not working in Workflow> > Hi Mike,> > I tried creating the dummy method that just takes in the T or F and> returns the T or F that was sent in like you said....got same results.> > I tried creating a new workflow with the new dummy task and a new> condition step (that reads the workflow container that is updated from> the method looking for the T or F)....got same results.> > I tried change T and F to Y and N....got same results.> > I can see the output container from the method in the workflow log.> But, if the condition is false, the output container from the method is> not returned to the workflow container and the condition step is not> executed. If the condition is true, the output container from the> method is returned to the workflow container and the condition step is> executed. > > I have an OSS note open with SAP. I can see where they have come into> the system and tested it, but as of yet, have not gotten a response from> them.> > I am totally befuddled!!!> > Regards,> Sue T. Doughty> SAP Workflow Specialist> Old Dominion Freight Line, Inc.> 500 Old Dominion Way> Thomasville, NC 27360> Phone: (336) 822-5189> Toll Free (800 ) 432-6335, ext. 5189> Email: sue.doughty at odfl.com> > -----Original Message-----> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf> Of Mike Pokraka> Sent: Thursday, February 28, 2008 7:54 AM> To: SAP Workflow Users' Group> Subject: RE: Condition step not working in Workflow> > Just to confirm the obvious: Does the step actually complete? (Status> Completed)> If it just completes and the next step doesn't start then your WF> definition couldbe corrupt. Put the two steps into a test WF and see if> that works.> > On Wed, February 27, 2008 6:20 pm, Sue Doughty wrote:> > Hi Mike,> >> > I changed the data type to SY-INPUT and still get the same results.> >> > Thank you for the suggestion though. I'm willing to try anything. I> > hope that it is not something so simple that I'll feel really stupid> > when I find it. :-)> >> > Regards,> > Sue T. Doughty> > SAP Workflow Specialist> > Old Dominion Freight Line, Inc.> > 500 Old Dominion Way> > Thomasville, NC 27360> > Phone: (336) 822-5189> > Toll Free (800 ) 432-6335, ext. 5189> > Email: sue.doughty at odfl.com> >> > -----Original Message-----> > From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On> Behalf> > Of Mike Pokraka> > Sent: Wednesday, February 27, 2008 12:13 PM> > To: SAP Workflow Users' Group> > Subject: RE: Condition step not working in Workflow> >> > Hmm, not too sure then. I thought I'd mention as it would be worth> > checking. Also make sure your data type is valid for the values. Try> > changing it to SY-INPUT just to make sure.> >> > On Wed, February 27, 2008 4:11 pm, Sue Doughty wrote:> >> Hi Mike,> >>> >> Thanks for your reply.> >>> >> I am not using a result parameter even though I tried that when it> did> >> not work the way I had it at first. Neither way works. I can see in> >> the workflow log that my export parameter (ImageFound) is being> >> populated with the correct 'T' or 'F' value, but the Results> > processing> >> step is not being executed with an F value - it only executes when> the> >> export parameter contains a 'T' value.> >>> >> I can't use a virtual attribute because the input parameters to the> >> method change with each call to the method (i.e., doctype and> >> imagedate).> >>> >> Regards,> >> Sue T. Doughty> >> SAP Workflow Specialist> >> Old Dominion Freight Line, Inc.> >> 500 Old Dominion Way> >> Thomasville, NC 27360> >> Phone: (336) 822-5189> >> Toll Free (800 ) 432-6335, ext. 5189> >> Email: sue.doughty at odfl.com> >> -----Original Message-----> >> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On> > Behalf> >> Of Mike Pokraka> >> Sent: Wednesday, February 27, 2008 10:44 AM> >> To: SAP Workflow Users' Group> >> Subject: Re: Condition step not working in Workflow> >>> >> Hi Sue,> >> Are you using a standard return parameter or a result parameter?> >> ("Result> >> parameter" checkbox on your method properties).> >> Result parameters behave differently, T/F must be defined within the> >> data> >> dictionary and become separate outcomes of the method.> >> Also, perhaps a virtual attribute might be easier if this is all that> >> the> >> method does...> >>> >> Cheers,> >> Mike> >>> >> On Tue, February 26, 2008 5:06 pm, Sue Doughty wrote:> >>> We are on 4.7, ECC 6.0> >>>> >>>> >>>> >>> I have a sub-workflow that executes a loop until a result flag is> set> >> to> >>> T. It executes a method that reads a table with some information.> > If> >>> the record is found, the result is set to T, if not it is set to F> > and> >>> the result container is set in the method. The next step is a> >> condition> >>> to check the result. If T, the loop and sub-workflow are completed,> >> if> >>> F, it waits and tries again after five minutes.> >>>> >>>> >>>> >>> My problem: If the method executes and the result is T, the> workflow> >>> works as designed. If the method returns a result of F, the> workflow> >>> stops at that step and does not move to the condition step to check> >> the> >>> result.> >>>> >>>> >>>> >>> I can see that the method is returning the result container. If the> >>> Result = T, I can see that the Result container is sent back to the> >>> sub-workflow. When I look at the step in the log, it says that the> >>> background item was created, started, work item processing is> > complete> >>> and the result processing is done with no errors.> >>>> >>>> >>>> >>> If the Result is F, I can see that the method is returning the> result> >>> container, but the workflow container does NOT get set to the> Result.> >>> When I look at the step in the log, it says that the background item> >> was> >>> created; started and work item processing is complete with no> errors,> >>> BUT the Result Processing is NOT done.> >>>> >>>> >>>> >>> What am I missing? Why is the Result processing being done for one> >>> result but not the other?> >>>> >>>> >>>> >>> Regards,> >>>> >>> Sue T. Doughty> >>>> >>> SAP Workflow Specialist> >>>> >>> Old Dominion Freight Line, Inc.> >>>> >>> 500 Old Dominion Way> >>>> >>> Thomasville, NC 27360> >>>> >>> Phone: (336) 822-5189> >>>> >>> Toll Free (800 ) 432-6335, ext. 5189> >>>> >>> Email: sue.doughty at odfl.com> >>>> >>>> >>>> >>> ****************************> >>> CONFIDENTIALITY NOTICE: The information contained in this message> may> >> be> >>> confidential, privileged, proprietary, or otherwise legally exempt> >> from> >>> disclosure. If the reader of this message is not the intended> >> recipient,> >>> or an employee or agent responsible for delivering this message to> > the> >>> intended recipient, you are hereby notified that you are not> >> authorized to> >>> read, print, retain, copy or disseminate this message, any part of> > it,> >> or> >>> any attachments. If you have received this message in error, please> >> delete> >>> this message and any attachments from your system without reading> the> >>> content and notify the sender immediately of the inadvertent> >> transmission.> >>> Thank you for your cooperation.> >>>> >>> _______________________________________________> >>> SAP-WUG mailing list> >>> SAP-WUG at mit.edu> >>> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>>> >>> >>> >> _______________________________________________> >> SAP-WUG mailing list> >> SAP-WUG at mit.edu> >> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>> >>> >> ****************************> >> CONFIDENTIALITY NOTICE: The information contained in this message may> > be> >> confidential, privileged, proprietary, or otherwise legally exempt> > from> >> disclosure. If the reader of this message is not the intended> > recipient,> >> or an employee or agent responsible for delivering this message to> the> >> intended recipient, you are hereby notified that you are not> > authorized to> >> read, print, retain, copy or disseminate this message, any part of> it,> > or> >> any attachments. If you have received this message in error, please> > delete> >> this message and any attachments from your system without reading the> >> content and notify the sender immediately of the inadvertent> > transmission.> >> Thank you for your cooperation.> >>> >> _______________________________________________> >> SAP-WUG mailing list> >> SAP-WUG at mit.edu> >> http://mailman.mit.edu/mailman/listinfo/sap-wug> >>> >> >> > _______________________________________________> > SAP-WUG mailing list> > SAP-WUG at mit.edu> > http://mailman.mit.edu/mailman/listinfo/sap-wug> >> >> > ****************************> > CONFIDENTIALITY NOTICE: The information contained in this message may> be> > confidential, privileged, proprietary, or otherwise legally exempt> from> > disclosure. If the reader of this message is not the intended> recipient,> > or an employee or agent responsible for delivering this message to the> > intended recipient, you are hereby notified that you are not> authorized to> > read, print, retain, copy or disseminate this message, any part of it,> or> > any attachments. If you have received this message in error, please> delete> > this message and any attachments from your system without reading the> > content and notify the sender immediately of the inadvertent> transmission.> > Thank you for your cooperation.> >> > _______________________________________________> > SAP-WUG mailing list> > SAP-WUG at mit.edu> > http://mailman.mit.edu/mailman/listinfo/sap-wug> >> > > _______________________________________________> SAP-WUG mailing list> SAP-WUG at mit.edu> http://mailman.mit.edu/mailman/listinfo/sap-wug> > > ****************************> CONFIDENTIALITY NOTICE: The information contained in this message may be> confidential, privileged, proprietary, or otherwise legally exempt from> disclosure. If the reader of this message is not the intended recipient,> or an employee or agent responsible for delivering this message to the> intended recipient, you are hereby notified that you are not authorized> to read, print, retain, copy or disseminate this message, any part of> it, or any attachments. If you have received this message in error,> please delete this message and any attachments from your system without> reading the content and notify the sender immediately of the inadvertent> transmission. Thank you for your cooperation.> > _______________________________________________> SAP-WUG mailing list> SAP-WUG at mit.edu> http://mailman.mit.edu/mailman/listinfo/sap-wug> > > > ------------------------------> > _______________________________________________> SAP-WUG mailing list> SAP-WUG at mit.edu> http://mailman.mit.edu/mailman/listinfo/sap-wug> > > End of SAP-WUG Digest, Vol 39, Issue 78> ***************************************
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20080228/ffa8b4b2/attachment.htm