HTTP-Errors in Approval Step for Standard Task TS50000075

[Ananth]

Hi Baerbel,

Can you please check whether you have maintained TS50000075 in SWFVISU
transaction.

Regards
Ananth

On 12/5/07, baerbel.winkler at carestreamhealth.com
<baerbel.winkler at carestreamhealth.com> wrote:
>
> Thanks, Mike, for your quick reply!
>
> Unfortunately, my colleagues already checked out transaction WF_HANDCUST and
> the settings there look okay.
>
> At the moment we are really at a loss and don't know where else to look or
> what else to try.
>
> Thanks and Cheers
> Baerbel
>
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 4 Dec 2007 11:01:47 -0000 (UTC)
> > From: "Mike Pokraka" <asap at workflowconnections.com>
> > Subject: Re: HTTP-Errors in Approval Step for Standard Task TS50000075
> > To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
> > Message-ID:
> >
> <32689.194.74.202.254.1196766107.squirrel at mail.workflowconnections.com>
> >
> > Content-Type: text/plain;charset=iso-8859-1
>
> >
> > Hi Baerbel,
> >
> > As far as the WUG/SDN question goes, there is a certain overlap. SDN is
> > driven by points so if you want a quick answer post there. WUG is driven
> > by interest and enthusiasm, so if you want a good answer post here. It all
> > depends on your question and it's complexity/urgency really. Nothing
> > stopping you from posting in both (though a small PS. note would be nice).
> >
> > To your question: It sounds like your web service handlers aren't setup.
> > Txn WF_HANDCUST should do the trick - it's mostly auto-generated but you
> > may need some basis input for hostnames etc. It's also reasonably well
> > documented.
> >
> > Hope that helps, shout back if not.
> > Cheers,
> > Mike
> >
> > On Tue, December 4, 2007 10:06,
> baerbel.winkler at carestreamhealth.com wrote:
> > Hi Folks,
> >
> > as this is my very first post to WUG, here is a quick introduction: I've
> > been involved with SAP and ABAP for almost 8 years (prior to that I did
> > PL/1-development) but I'm completely new to Workflow (just had BIT601 last
> > month). I already spent some time reading and searching through the
> > SDN-Forums/Blogs/Wikis and have posted this question there as well last
> > week, but - helpful as they were - the replies haven't yet solved our
> > issue. As I don't really know how much overlap there is between SDN-forum-
> > and WUG-participants, I'd like to try this venue as well.
> >
> > Now for my current issue:
> >
> > I'm involved with a project to make use of the Manager Self Service (MSS)
> > functionality provided by SAP. A colleague and I are trying to follow the
> > information provided by SAP in these three documents: "Configuration Guide
> > for the Personnel Change Request (Release 60.1)", "Developing your own
> > personnel change requests (Release 50.1/50.2)" and "Internal Service
> > Request (ISR) cookbook (July 2004)". We are running Netweaver 04, SAP
> > Basis 620, SAP_HR 470.
> >
> > As a prototype, we've managed to get scenario SPPD for "Change Position
> > (enhanced)" set up in the MyHRManager-section of the portal. We can submit
> > the form for one of the employees we've set up in the development system
> > and we also see (via transaction SWEL) that Standard Workflow WS50000041
> > is triggered. Subworkflow WS50000033 is triggered as well and the
> > work-item for standard task TS50000075 gets assigned to the correct
> > responsible agent (we did have an issue with the agent-assignment earlier,
> > but - for whatever reason - this is now working fine).
> >
> > Whenever the responsible agent tries to process the workitem, we get the
> > following two HTTP-related errors and don't seem to be able to find the
> > root-cause for them:
> >
> > 1.
> > Work item 000000319008: Object method SWW_WW_EXECUTE_S cannot be executed
> > Message no. WL821
> >
> > 2.
> > HTTP handler for starting an external service cannot be read
> > Message no. SWK045
> >
> > I did find a reference to WL821 in OSS where it says that this is usually
> > a very meaningless message, but I didn't find anything for SWK045. Does
> > anybody have any ideas which configuartion settings we might need to check
> > and possibly modify? Unfortunately, neither my colleague nor myself really
> > know what we need to be on the lookout for, so any information will be
> > helpful. We also already tried to find out where these messages get
> > triggered via debugging, but were not successful. A "where-used" for the
> > messages also didn't find anything.
> >
> > Before we can progress with our project, we are fairly certain that we
> > first have to get the SAP-supplied PCRs working - otherwise we'll later
> > never know where any issues are coming from!
> >
> > Thanks and Cheers
> > Baerbel
> > _______________________________________________
> > SAP-WUG mailing list
> > SAP-WUG at mit.edu
> > http://mailman.mit.edu/mailman/listinfo/sap-wug
> >
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>