Workitem id in UWL

Fri Aug 31 03:20:57 EDT 2007

Why don't you use the custom attributes wizard in the UWL Admin?

Regards, 
Jocelyn Dart 
Senior Consultant 
SAP Australia Pty Ltd. 
Level 1/168 Walker St. 
North Sydney 
NSW, 2060 
Australia 
T   +61 412 390 267 
M   + 61 412 390 267 
E   jocelyn.dart at sap.com 
http://www.sap.com <http://www.sap.com/>  

The information contained in or attached to this electronic transmission is confidential and may be legally privileged. It is intended only for the person or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any distribution, copying, review, retransmission, dissemination or other use of this electronic transmission or the information contained in it is strictly prohibited. If you have received this electronic transmission in error, please immediately contact the sender to arrange for the return of the original documents. 

Electronic transmission cannot be guaranteed to be secure and accordingly, the sender does not accept liability for any such data corruption, interception, unauthorized amendment, viruses, delays or the consequences thereof.

Any views expressed in this electronic transmission are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of SAP AG or any of its subsidiaries. SAP AG, its subsidiaries, and their directors, officers and employees make no representation nor accept any liability for the accuracy or completeness of the views or information contained herein. Please be aware that the furnishing of any pricing information/ business proposal herein is indicative only, is subject to change and shall not be construed as an offer or as constituting a binding agreement on the part of SAP AG or any of its subsidiaries to enter into any relationship, unless otherwise expressly stated. 

________________________________

From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf Of Damian Reyes
Sent: Friday, 31 August 2007 5:04 PM
To: SAP Workflow Users' Group
Subject: Re: Workitem id in UWL

Could anybody give me an example?
Thanks in advance

On 8/31/07, Dart, Jocelyn <jocelyn.dart at sap.com> wrote: 

	Hi Damian, 

	externalId (that's capital I as in Id) is the correct field. 
	I notice in the UWL config guide that the externalId is a hidden field. 
	So you might need to create your own custom attribute to show it. 

	You need to put the custom attribute tag against the item type and a matching displayattribute tag in the view, and also adjust the column order in the view. 

	Regards, 
	Jocelyn Dart 
	Senior Consultant 
	SAP Australia Pty Ltd. 
	Level 1/168 Walker St. 
	North Sydney 
	NSW, 2060 
	Australia 
	T   +61 412 390 267 
	M   + 61 412 390 267 
	E   jocelyn.dart at sap.com 
	http://www.sap.com <http://www.sap.com/>  

	The information contained in or attached to this electronic transmission is confidential and may be legally privileged. It is intended only for the person or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any distribution, copying, review, retransmission, dissemination or other use of this electronic transmission or the information contained in it is strictly prohibited. If you have received this electronic transmission in error, please immediately contact the sender to arrange for the return of the original documents. 

	Electronic transmission cannot be guaranteed to be secure and accordingly, the sender does not accept liability for any such data corruption, interception, unauthorized amendment, viruses, delays or the consequences thereof. 

	Any views expressed in this electronic transmission are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of SAP AG or any of its subsidiaries. SAP AG, its subsidiaries, and their directors, officers and employees make no representation nor accept any liability for the accuracy or completeness of the views or information contained herein. Please be aware that the furnishing of any pricing information/ business proposal herein is indicative only, is subject to change and shall not be construed as an offer or as constituting a binding agreement on the part of SAP AG or any of its subsidiaries to enter into any relationship, unless otherwise expressly stated. 

________________________________

	From: sap-wug-bounces at mit.edu [mailto: sap-wug-bounces at mit.edu <mailto:sap-wug-bounces at mit.edu> ] On Behalf Of Damian Reyes
	Sent: Thursday, 30 August 2007 6:49 PM 

	To: SAP Workflow Users' Group
	Subject: Re: Workitem id in UWL

	Yes,
	I always make another visible change to check that new modifications take effect.
	Thanks,

	On 8/30/07, Dart, Jocelyn <jocelyn.dart at sap.com > wrote: 

		Just to check the obvious.... Did you remember to clear the Cache???? 
		And did you make sure you did it in the appropriate view. 

		Regards, 
		Jocelyn Dart 
		Senior Consultant 
		SAP Australia Pty Ltd. 
		Level 1/168 Walker St. 
		North Sydney 
		NSW, 2060 
		Australia 
		T   +61 412 390 267 
		M   + 61 412 390 267 
		E   jocelyn.dart at sap.com 
		http://www.sap.com <http://www.sap.com/>  

		The information contained in or attached to this electronic transmission is confidential and may be legally privileged. It is intended only for the person or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any distribution, copying, review, retransmission, dissemination or other use of this electronic transmission or the information contained in it is strictly prohibited. If you have received this electronic transmission in error, please immediately contact the sender to arrange for the return of the original documents. 

		Electronic transmission cannot be guaranteed to be secure and accordingly, the sender does not accept liability for any such data corruption, interception, unauthorized amendment, viruses, delays or the consequences thereof. 

		Any views expressed in this electronic transmission are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of SAP AG or any of its subsidiaries. SAP AG, its subsidiaries, and their directors, officers and employees make no representation nor accept any liability for the accuracy or completeness of the views or information contained herein. Please be aware that the furnishing of any pricing information/ business proposal herein is indicative only, is subject to change and shall not be construed as an offer or as constituting a binding agreement on the part of SAP AG or any of its subsidiaries to enter into any relationship, unless otherwise expressly stated. 

________________________________

		From: sap-wug-bounces at mit.edu [mailto: sap-wug-bounces at mit.edu <mailto:sap-wug-bounces at mit.edu> ] On Behalf Of Damian Reyes
		Sent: Thursday, 30 August 2007 5:09 PM 

		To: SAP Workflow Users' Group
		Subject: Re: Workitem id in UWL

		Thanks Rahul and Jocelyn,

		externalId doesn't work. ¿Could I define a BOR attribute to show workflow or workitem id? I don't know how. Really I'm surprised because I thought it could be easier!!!

		Thanks in advance,

		On 8/30/07, Dart, Jocelyn <jocelyn.dart at sap.com > wrote: 

			Rahul,
			You need to look further.

			Damian, try attribute externalId.

			Also you might want to try turning on the UWL Support Information - in 
			the Portal Content Directory settings for the UWL iview so  you can get
			extra help during configuration.

			Regards,
			Jocelyn Dart
			Senior Consultant
			SAP Australia Pty Ltd.
			Level 1/168 Walker St.
			North Sydney
			NSW, 2060
			Australia
			T   +61 412 390 267
			M   + 61 412 390 267
			E   jocelyn.dart at sap.com 
			http://www.sap.com <http://www.sap.com/> 

			The information contained in or attached to this electronic transmission 
			is confidential and may be legally privileged. It is intended only for 
			the person or entity to which it is addressed. If you are not the
			intended recipient, you are hereby notified that any distribution,
			copying, review, retransmission, dissemination or other use of this 
			electronic transmission or the information contained in it is strictly 
			prohibited. If you have received this electronic transmission in error,
			please immediately contact the sender to arrange for the return of the 
			original documents.
			Electronic transmission cannot be guaranteed to be secure and 
			accordingly, the sender does not accept liability for any such data
			corruption, interception, unauthorized amendment, viruses, delays or the 
			consequences thereof.
			Any views expressed in this electronic transmission are those of the 
			individual sender, except where the message states otherwise and the
			sender is authorized to state them to be the views of SAP AG or any of 
			its subsidiaries. SAP AG, its subsidiaries, and their directors,
			officers and employees make no representation nor accept any liability 
			for the accuracy or completeness of the views or information contained
			herein. Please be aware that the furnishing of any pricing information/ 
			business proposal herein is indicative only, is subject to change and 
			shall not be construed as an offer or as constituting a binding
			agreement on the part of SAP AG or any of its subsidiaries to enter into
			any relationship, unless otherwise expressly stated. 

			-----Original Message----- 
			From: sap-wug-bounces at mit.edu [mailto: sap-wug-bounces at mit.edu <mailto:sap-wug-bounces at mit.edu> ] On Behalf
			Of Rahul Shukla 
			Sent: Thursday, 30 August 2007 1:11 AM
			To: SAP Workflow Users' Group
			Subject: Re: Workitem id in UWL

			There is no such configurable column to show workitem 
			id in UWL.

			--- Damian Reyes < reyesd at gmail.com <mailto:reyesd at gmail.com> > wrote:

			> Hi,
			> I'm configuring Netweaver to change UWL visibility. 
			> My problem is that I cannot see workitem id or
			> workflow id as a new column.
			> Regarding documentation, parameter is not visible. 
			> How can I show this
			> parameter?
			>
			>
			http://help.sap.com/saphelp_nw04/helpdata/en/44/b71b7934d91578e10000000a 
			114a6b/frameset.htm
			>
			> Thanks in advance,
			> Damian
			> > _______________________________________________
			> SAP-WUG mailing list 
			> SAP-WUG at mit.edu 
			> http://mailman.mit.edu/mailman/listinfo/sap-wug
			>

			Something that can't be re-cycled is Wasted Time.

			________________________________________________________________________ 
			____________ 
			Pinpoint customers who are looking for what you sell.
			http://searchmarketing.yahoo.com/
			_______________________________________________ 
			SAP-WUG mailing list 
			SAP-WUG at mit.edu
			http://mailman.mit.edu/mailman/listinfo/sap-wug

			_______________________________________________ 
			SAP-WUG mailing list
			SAP-WUG at mit.edu
			http://mailman.mit.edu/mailman/listinfo/sap-wug

		_______________________________________________
		SAP-WUG mailing list
		SAP-WUG at mit.edu 
		http://mailman.mit.edu/mailman/listinfo/sap-wug

	_______________________________________________
	SAP-WUG mailing list
	SAP-WUG at mit.edu
	http://mailman.mit.edu/mailman/listinfo/sap-wug

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20070831/e20ca9da/attachment.htm