Workflow Not triggering

Mon Jan 16 15:44:31 EST 2006

Aadesh,

   Make sure your Event Linkage is Activated in the WF (Green Light). When you enter these values in the WF they should automatically be updated in SWE2. Why are you replacing the standard entry in SWE2 & replacing it with yours? You can put both entries there at the same time, you'll have different Receiver Types.

Jeffrey A. Rappaport
Business Workflow, LLC
Voice: (732) 355-0123
Fax:    (509) 757-4144
Email: Jeff at Business-Workflow.com
Web:  www.Business-Workflow.com
  ----- Original Message ----- 
  From: Aadesh 
  To: 'SAP Workflow Users' Group' 
  Sent: Monday, January 16, 2006 3:07 AM
  Subject: RE: Workflow Not triggering

  Ya, Only 1 Workflow is getting triggered with the object BUS2121 with the
  SAVED event.
  If I will make my entry in SWE2 removing the type linkage from the other
  workflow, then my workflow is getting triggered.
  So, at a time only 1 wf is getting triggered.
  And, I want to trigger more than 1 wf from the same object type with the
  same event.

  Hope, you get my point.

  -----Original Message-----
  From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu]On Behalf
  Of Kjetil Kilhavn
  Sent: Monday, January 16, 2006 1:15 PM
  To: SAP Workflow Users' Group
  Subject: RE: Workflow Not triggering

  I am not sure if I understand quite what you're saying here.
  You say you have set the same triggering event; then your workflow is not
  started, but the standard WF is.
  In your next paragraph you say that if you try to make an entry in SWE2
  (which is exactly what should happen when you set the triggering event) none
  of the workflows are started.

  >From the first "test" I would recommend that you check whether an event is
  being published at all. Perhaps the WF is not started by an event, perhaps
  it is started directly.

  With respect to the second test it would perhaps help if you told us what
  your entry values was, but I assume they weren't correct since you got that
  error message. Hard to tell from a distance though.
  -- 
  Kjetil Kilhavn, Statoil ØFT KTJ ITS BKS SAP Basis

  > -----Original Message-----
  > From: sap-wug-bounces at mit.edu 
  > [mailto:sap-wug-bounces at mit.edu] On Behalf Of vijay srikanth
  > Sent: 14. januar 2006 10:48
  > To: sap-wug at mit.edu
  > Subject: RE: Workflow Not triggering
  > 
  > Hi Aadesh,
  > 
  > Try delegating your ZBUS2121 to BUS2121. That way you're 
  > custom events would seemingly look like the base type's 
  > events. Then try triggering your workflow. Also in your 
  > worklow you'll have to change the object type and the event. 
  > Also try refreshing the workflow settings using SWU_OBUF.
  > 
  > Regards,
  > Vijay
  > 
  > 
  > >From: "Aadesh" <aadesh.srivastava at patni.com>
  > >Reply-To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
  > >To: "'SAP Workflow Users' Group'" <sap-wug at mit.edu>
  > >Subject: RE: Workflow Not triggering
  > >Date: Fri, 13 Jan 2006 19:05:43 +0530
  > >
  > >Hi Kjetil,
  > >
  > >  I have tried with using the same triggering event(START) of the 
  > >Object
  > >BUS2121 in my Workflow.
  > >  But, my Workflow is not getting triggered and the other 
  > Workflow is 
  > >getting triggered with the same Object and Event.
  > >  I think there should be some entry required to be made somewhere.
  > >
  > >  I am not getting any idea why this is happening. There is a 
  > >transaction
  > >SWE2 where the entries should take place regarding the 
  > Business Object 
  > >, Event and the Workflow. If i make an entry there then it's not 
  > >triggering any of the workflow and getting the message as 
  > "....Contact Administrator".
  > >
  > >  Pls. suggest to overcome this problem.
  > >
  > >Thjanks & Regards,
  > >Aadesh
  > >
  > >
  > >-----Original Message-----
  > >From: sap-wug-bounces at mit.edu 
  > [mailto:sap-wug-bounces at mit.edu]On Behalf 
  > >Of Kjetil Kilhavn
  > >Sent: Friday, January 13, 2006 6:03 PM
  > >To: SAP Workflow Users' Group
  > >Subject: RE: Workflow Not triggering
  > >
  > >
  > >There are many ways. Here are two of them:
  > >1) If the standard workflow is started using an event you 
  > can use the 
  > >same triggering event.
  > >2) You can modify the standard workflow and insert a step 
  > which starts 
  > >your workflow.
  > >--
  > >Kjetil Kilhavn, Statoil ØFT KTJ ITS BKS SAP Basis
  > >
  > >
  > >
  > >
  > >
  > >   _____
  > >
  > >From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On 
  > >Behalf Of Aadesh
  > >Sent: 13. januar 2006 12:55
  > >To: 'SAP Workflow Users' Group'
  > >Subject: Workflow Not triggering
  > >
  > >
  > >Hi Everyone,
  > >
  > >  I have created a supertype as ZBUS2121 of the Object 
  > BUS2121 and i am 
  > >using this object in my Custom Shopping Cart Workflow.
  > >  The problem here is how can I trigger my workflow along with the 
  > >existing one whernever a shopping cart is created.
  > >
  > >  Any help will be appreciated.
  > >
  > >Regards,
  > >Aadesh
  > >
  > >
  > >
  > >-------------------------------------------------------------------
  > >The information contained in this message may be CONFIDENTIAL and is 
  > >intended for the addressee only. Any unauthorised use, 
  > dissemination of 
  > >the information or copying of this message is prohibited. If you are 
  > >not the addressee, please notify the sender immediately by return 
  > >e-mail and delete this message.
  > >Thank you.
  > >
  > 
  > 
  > ><< winmail.dat >>
  > 
  > 
  > >_______________________________________________
  > >SAP-WUG mailing list
  > >SAP-WUG at mit.edu
  > >http://mailman.mit.edu/mailman/listinfo/sap-wug
  > 
  > 
  > 

  -------------------------------------------------------------------
  The information contained in this message may be CONFIDENTIAL and is
  intended for the addressee only. Any unauthorised use, dissemination of the
  information or copying of this message is prohibited. If you are not the
  addressee, please notify the sender immediately by return e-mail and delete
  this message.
  Thank you.

  _______________________________________________
  SAP-WUG mailing list
  SAP-WUG at mit.edu
  http://mailman.mit.edu/mailman/listinfo/sap-wug

------------------------------------------------------------------------------

  _______________________________________________
  SAP-WUG mailing list
  SAP-WUG at mit.edu
  http://mailman.mit.edu/mailman/listinfo/sap-wug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20060116/33144a45/attachment.htm