Controlling Forwarding at a task level in 4.6C

[Mark Pyc]

G'day Jocelyn,

No it doesn't unfortunately. From your experience does a basis kernal
upgrade of 4.6C to 4.6D include this additional field??

Thanks,
Mark

On 11/7/05, Dart, Jocelyn <jocelyn.dart at sap.com> wrote:
> Hi Mark,
> It's correct that the application version would be 4.6C while the Basis
> version is 4.6d.
>
> Check the field NO_SEND (data element NO_SEND type CHAR value 1) exists
> on table HRP1217.
>
>
> Regards,
> Jocelyn Dart
> Senior Consultant
> SAP Australia Pty Ltd.
> Level 1/168 Walker St.
> North Sydney
> NSW, 2060
> Australia
> T   +61 412 390 267
> M   + 61 412 390 267
> E   jocelyn.dart at sap.com
> http://www.sap.com
>
> The information contained in or attached to this electronic transmission
> is confidential and may be legally privileged. It is intended only for
> the person or entity to which it is addressed. If you are not the
> intended recipient, you are hereby notified that any distribution,
> copying, review, retransmission, dissemination or other use of this
> electronic transmission or the information contained in it is strictly
> prohibited. If you have received this electronic transmission in error,
> please immediately contact the sender to arrange for the return of the
> original documents.
> Electronic transmission cannot be guaranteed to be secure and
> accordingly, the sender does not accept liability for any such data
> corruption, interception, unauthorized amendment, viruses, delays or the
> consequences thereof.
> Any views expressed in this electronic transmission are those of the
> individual sender, except where the message states otherwise and the
> sender is authorized to state them to be the views of SAP AG or any of
> its subsidiaries. SAP AG, its subsidiaries, and their directors,
> officers and employees make no representation nor accept any liability
> for the accuracy or completeness of the views or information contained
> herein. Please be aware that the furnishing of any pricing information/
> business proposal herein is indicative only, is subject to change and
> shall not be construed as an offer or as constituting a binding
> agreement on the part of SAP AG or any of its subsidiaries to enter into
> any relationship, unless otherwise expressly stated.
>
>
> -----Original Message-----
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
> Of Mark Pyc
> Sent: Friday, 04 November 2005 9:27 PM
> To: SAP Workflow Users' Group
> Subject: Re: Controlling Forwarding at a task level in 4.6C
>
> G'day Jocelyn,
>
> After talking to the basis team and hitting the extra button "Other
> Kernal Info" on the System>Status screen it turns out we are on 4.6D
> from a Kernal release point of view, however we don't have the option
> of 'Forwarding Not Allowed'.
>
> I've found numerous previous responses from you indicating that this
> is available as of 4.6D. The basis team here are of the opinion that
> they have done the Basis/Kernal upgrade and yet the component version
> is still 4.6C.
>
> Have you got any further insights into this? Is it worth taking up with
> OSS??
>
> Thanks,
> Mark
>
> On 11/4/05, Dart, Jocelyn <jocelyn.dart at sap.com> wrote:
> > Mark,
> > But 4.6D is only a support pack away - as 4.6D is only relevant to the
> > Basis/Kernel of a 4.6C system.
> > You might want to talk to your basis folk about the support pack
> > strategy on site.
> >
> >
> > Regards,
> > Jocelyn Dart
> > Senior Consultant
> > SAP Australia Pty Ltd.
> > Level 1/168 Walker St.
> > North Sydney
> > NSW, 2060
> > Australia
> > T   +61 412 390 267
> > M   + 61 412 390 267
> > E   jocelyn.dart at sap.com
> > http://www.sap.com
> >
> <bits removed for Kjetils benefit>
> >
> > -----Original Message-----
> > From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
> Behalf
> > Of Mark Pyc
> > Sent: Friday, 04 November 2005 9:00 AM
> > To: WUG
> > Subject: Controlling Forwarding at a task level in 4.6C
> >
> > G'day Wuggers,
> >
> > Anyone got a trick for controlling forwarding at a task level in 4.6C.
> > Unbelievably (to me anyway) the ability to choose 'forwarding not
> > allowed' at task level only comes in in 4.6D - missed by thaaat much!
> >
> > Seaching the archives revealed a treat from Helena Svanikier about
> > using the field exit for the data element 'SEARK' (which appears when
> > selecting the user to forward to) but this doesn't allow control at a
> > task level, the only data available is the selected user and whatever
> > you can find is SYST. Helena was using it to control who could
> > forward, not which tasks could be forwarded.
> >
> > Does anyone know of an exit or equivalent.
> >
> > I've asked a similar question before and there were some great
> > suggestions such as manipulating WI display to include extra buttons,
> > but I'm hoping for something nice and neat behind the scenes if
> > possible.
> >
> > Actually, I've just remembered that I meant to try using
> > authorizations and Task Categories - has anyone done this??
> >
> > Many many thanks,
> > Mark
> >
> > _______________________________________________
> > SAP-WUG mailing list
> > SAP-WUG at mit.edu
> > http://mailman.mit.edu/mailman/listinfo/sap-wug
> >
> > _______________________________________________
> > SAP-WUG mailing list
> > SAP-WUG at mit.edu
> > http://mailman.mit.edu/mailman/listinfo/sap-wug
> >
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>