Controlling Forwarding at a task level in 4.6C

[Dart, Jocelyn]

Hi Mark, 
It's correct that the application version would be 4.6C while the Basis
version is 4.6d.

Check the field NO_SEND (data element NO_SEND type CHAR value 1) exists
on table HRP1217. 


Regards,
Jocelyn Dart
Senior Consultant
SAP Australia Pty Ltd.
Level 1/168 Walker St.
North Sydney 
NSW, 2060
Australia
T   +61 412 390 267
M   + 61 412 390 267
E   jocelyn.dart at sap.com
http://www.sap.com

The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents. 
Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.
Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated. 


-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Mark Pyc
Sent: Friday, 04 November 2005 9:27 PM
To: SAP Workflow Users' Group
Subject: Re: Controlling Forwarding at a task level in 4.6C

G'day Jocelyn,

After talking to the basis team and hitting the extra button "Other
Kernal Info" on the System>Status screen it turns out we are on 4.6D
from a Kernal release point of view, however we don't have the option
of 'Forwarding Not Allowed'.

I've found numerous previous responses from you indicating that this
is available as of 4.6D. The basis team here are of the opinion that
they have done the Basis/Kernal upgrade and yet the component version
is still 4.6C.

Have you got any further insights into this? Is it worth taking up with
OSS??

Thanks,
Mark

On 11/4/05, Dart, Jocelyn <jocelyn.dart at sap.com> wrote:
> Mark,
> But 4.6D is only a support pack away - as 4.6D is only relevant to the
> Basis/Kernel of a 4.6C system.
> You might want to talk to your basis folk about the support pack
> strategy on site.
>
>
> Regards,
> Jocelyn Dart
> Senior Consultant
> SAP Australia Pty Ltd.
> Level 1/168 Walker St.
> North Sydney
> NSW, 2060
> Australia
> T   +61 412 390 267
> M   + 61 412 390 267
> E   jocelyn.dart at sap.com
> http://www.sap.com
>
<bits removed for Kjetils benefit>
>
> -----Original Message-----
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
Behalf
> Of Mark Pyc
> Sent: Friday, 04 November 2005 9:00 AM
> To: WUG
> Subject: Controlling Forwarding at a task level in 4.6C
>
> G'day Wuggers,
>
> Anyone got a trick for controlling forwarding at a task level in 4.6C.
> Unbelievably (to me anyway) the ability to choose 'forwarding not
> allowed' at task level only comes in in 4.6D - missed by thaaat much!
>
> Seaching the archives revealed a treat from Helena Svanikier about
> using the field exit for the data element 'SEARK' (which appears when
> selecting the user to forward to) but this doesn't allow control at a
> task level, the only data available is the selected user and whatever
> you can find is SYST. Helena was using it to control who could
> forward, not which tasks could be forwarded.
>
> Does anyone know of an exit or equivalent.
>
> I've asked a similar question before and there were some great
> suggestions such as manipulating WI display to include extra buttons,
> but I'm hoping for something nice and neat behind the scenes if
> possible.
>
> Actually, I've just remembered that I meant to try using
> authorizations and Task Categories - has anyone done this??
>
> Many many thanks,
> Mark
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
>

_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug