Event PDOTYPE_S created not being raised since 4.7
David Weston
weston at clockwork.ca
Fri Oct 29 17:44:08 EDT 2004
Hilhne, is the setting in T77S0 for WORKF ACTIV set to an X ? I am starting
to run out of ideas now.
Have you created an OSS message for this as well ? If not I would think
about doing that.
Cheers
Dave
-----Original Message-----
From: SAP Workflow [mailto:Owner-SAP-WUG at MITVMA.MIT.EDU] On Behalf Of
HELENE_PAQUIN at acdi-cida.gc.ca
Sent: 29 October 2004 12:20
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: Event PDOTYPE_S created not being raised since 4.7
Thank you Thomas and David,
The Existence Check method is OK. I did an event trace and function module
HR_EVENT_CREATE is not being called... how can we fix that?
Thanks!
Hilhne Paquin
819-994-2249 | helene_paquin at acdi-cida.gc.ca | Tilicopieur/Facsimile:
819-953-6359
Programmeur des diroulements SAP, Services et solutions ` la clienthle
Direction ginirale de la gestion de l'information et de la technologie
Agence canadienne de diveloppement international 200, promenade du Portage,
Gatineau (Quibec) Canada K1A 0G4
SAP Workflow Developer, Client Services and Solutions Division Information
Management and Technology Branch Canadian International Development Agency
200 Promenade du Portage, Gatineau (Quebec) Canada K1A 0G4
Thomas Maue
<Thomas.Maue at ipaper To:
SAP-WUG at MITVMA.MIT.EDU
.com> cc:
Sent by: SAP Subject: Re: Event
PDOTYPE_S created not being raised since 4.7
Workflow
<Owner-SAP-WUG at MITV
MA.MIT.EDU>
2004-10-28 02:17 PM
Please respond to
SAP Workflow Users'
Group
Helene,
Everything looks good so far. Dave is right, try to debug.
Some other thoughts are:
Can you test the Business object using the position number you have created?
Does it have any problems when you instantiate (ExistenceCheck method)?
When you say 'create new Planned Position' does this mean the planned status
is '2' for planned?
Create position with another transaction (PO13) and see if event is raised.
Structural authorizations?
Tom
"David Weston"
<weston at clockwork
.ca> To
Sent by: "SAP SAP-WUG at MITVMA.MIT.EDU
Workflow" cc
<Owner-SAP-WUG at MI
TVMA.MIT.EDU> Subject
Re: Event PDOTYPE_S created not
being raised since 4.7
10/28/2004 12:42
PM
Please respond to
"SAP Workflow
Users' Group"
<SAP-WUG at MITVMA.M
IT.EDU>
Helene, check if the function module HR_EVENT_CREATE is called (dialog or
update).....this is where the events get triggered from I think.
Dave
-----Original Message-----
From: SAP Workflow [mailto:Owner-SAP-WUG at MITVMA.MIT.EDU] On Behalf Of
HELENE_PAQUIN at acdi-cida.gc.ca
Sent: 28 October 2004 09:44
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: Event PDOTYPE_S created not being raised since 4.7
Hi Thomas, here is the information:
Entry in Table T779X:
OTYPE: S
INFTY: 1000
WFOPR: INS
WFSEQ: 0
BUSOB: PDOTYPE_S
EVENT: CREATED
Entry in T777IBO:
OTYPE: S
INFTY: 1000
OBJTYP: PDOTYPE_S
The event name in the Business object is: ZPDOTYPE_S.CREATED Released
status is: Released Business Object Type and Supertype: have been both
generated successfully Authorization issue: NONE since I have SAP all in
that client. What am I performing to raise the event: I am creating with
transaction PPO3 a new Planned Position (Action OCR1), which creates an
entry in Table HRP1000 (A position of type S and infotype 1000).
Can you think of any reason why the event won't raise?
Thank you so much!
Hilhne Paquin
819-994-2249 | helene_paquin at acdi-cida.gc.ca | Tilicopieur/Facsimile:
819-953-6359
Programmeur des diroulements SAP, Services et solutions ` la clienthle
Direction ginirale de la gestion de l'information et de la technologie
Agence canadienne de diveloppement international 200, promenade du Portage,
Gatineau (Quibec) Canada K1A 0G4
SAP Workflow Developer, Client Services and Solutions Division Information
Management and Technology Branch Canadian International Development Agency
200 Promenade du Portage, Gatineau (Quebec) Canada K1A 0G4
Thomas Maue
<Thomas.Maue at ipaper To:
SAP-WUG at MITVMA.MIT.EDU
.com> cc:
Sent by: SAP Subject: Re: Event
PDOTYPE_S created not being raised since 4.7
Workflow
<Owner-SAP-WUG at MITV
MA.MIT.EDU>
2004-10-26 06:19 PM
Please respond to
SAP Workflow Users'
Group
Helene,
Can you cut/paste your T779X entries into this email.
What is your T777IBO entry?
What is the event name in the Business Object? What released status is the
event in?
Generate your Business Object and supertype.
Don't have authorization for PPO3 here, what are you performing to raise the
event? Check SU53 to see if there is an authorization issue.
Regards,
Thomas Maue
HELENE_PAQUIN at acd
i-cida.gc.ca
Sent by: "SAP To
Workflow" SAP-WUG at MITVMA.MIT.EDU
<Owner-SAP-WUG at MI cc
TVMA.MIT.EDU>
Subject
Re: Event PDOTYPE_S created not
10/26/2004 08:53 being raised since 4.7
AM
Please respond to
"SAP Workflow
Users' Group"
<SAP-WUG at MITVMA.M
IT.EDU>
Hello Again,
Would anyone have any idea as what might be wrong? Any suggestions or
comments to help shine some light on this problem would be greatly
appreciated.
Helene Paquin
Thank you
PS: if this message is posted twice, I apologize, we seem to be having
problems posting messages.
HELENE_PAQUIN at acdi-
cida.gc.ca To:
SAP-WUG at MITVMA.MIT.EDU
Sent by: SAP cc:
Workflow Subject: Event PDOTYPE_S
created not being raised since 4.7
<Owner-SAP-WUG at MITV
MA.MIT.EDU>
2004-10-20 04:06 PM
Please respond to
SAP Workflow Users'
Group
Hello all:
Since our upgrade from 4.6 to 4.7, the only way our event gets raised is
through an activity with method create, object PDOTYPE_S from the workflow.
Problem: Since 4.7, the event is no longer being raised from the
transaction PP03 in SAP.
I have revisited all our settings, i.e.:
- We have an entry in Table T777IBO (SWEHR1);
- We have an entry in Table T779X (SWEHR3);
- Transaction OOWFAC is active;
- Object ZPDOTYPE_S is properly delegated;
- The event linkage (SWETYPV) is active;
- We had a look at OSS note 307663;
- All above tables are active;
- SWELS is on.
Yet the event is not being raised through the transaction PP03, at least it
is not showing up in SWEL.
Hilhne Paquin
819-994-2249 | helene_paquin at acdi-cida.gc.ca | Tilicopieur/Facsimile:
819-953-6359
Programmeur des diroulements SAP, Services et solutions ` la clienthle
Direction ginirale de la gestion de l'information et de la technologie
Agence canadienne de diveloppement international 200, promenade du Portage,
Gatineau (Quibec) Canada K1A 0G4
SAP Workflow Developer, Client Services and Solutions Division Information
Management and Technology Branch Canadian International Development Agency
200 Promenade du Portage, Gatineau (Quebec) Canada K1A 0G4
More information about the SAP-WUG
mailing list