AW: AW: getting an attribute
Dart, Jocelyn
jocelyn.dart at sap.com
Tue Oct 1 08:21:21 EDT 2002
Hi Jose,=20
You are after the material number itself, yes?
So you are just missing the final piece that grabs
the material number itself. You need to get the material
number as an attribute of your material object.=20
I.e.
DATA: material TYPE swc_object OCCURS 0,
matobj TYPE swc_object,
matnr TYPE swc_object,
materialnumber type mara-matnr.=20
=20
swc_get_table ac_container 'Material' material. =3D=3D=3D=3D=3D>=20
Pick up your table of VBAP objects
READ TABLE material INDEX 1 INTO matobj. =3D=3D=3D=3D=3D=3D>=20
Pick up a single VBAP object=20
swc_get_property matobj 'Material' matnr. =3D=3D=3D=3D=3D>=20
Pick up the BUS1001 object linked to the VBAP object
*** And now the final bit ****
swc_get_property matnr 'Material' materialnumber. =3D=3D=3D=3D>
Pick up the material number from the BUS1001 object.=20
Hope that helps.
Regards,
Jocelyn Dart=20
Consultant (SRM, EBP, Workflow)
and co-author of the book
"Practical Workflow for SAP"=20
SAP Australia
email: jocelyn.dart at sap.com=20
phone: +61 412 390 267
fax: +61 2 9935 4880
=20
-----Original Message-----
From: Jose Burgman [AST] [mailto:jose.burgman at ast.co.za]
Sent: Tuesday, 1 October 2002 5:46 PM
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: AW: AW: getting an attribute
Hi there
The material attribute of the object VBAP is also an object (BUS1001), =
so this won't work.
Thanks.
Jose
-----Original Message-----
From: PSINOVA AG - Matthias Hilpert
[mailto:matthias.hilpert at psinova.com]
Sent: Tuesday, October 01, 2002 8:01 AM
To: SAP-WUG at MITVMA.MIT.EDU
Subject: AW: AW: getting an attribute
Hello Jose,
try the following: change the data type of your variable MATNR! This is
not an object reference!
> DATA: material TYPE swc_object OCCURS 0,
> matobj TYPE swc_object,
> matnr like vbap-matnr. "instead of TYPE swc_object.
<=3D=3D=3D!!!!!
> =20
> swc_get_table ac_container 'Material' material. =3D=3D=3D=3D=3D>=20
> material filled with table
> READ TABLE material INDEX 1 INTO matobj. =3D=3D=3D=3D=3D=3D> matobj =
filled
> swc_get_property matobj 'Material' matnr. =3D=3D=3D=3D=3D> matnr =
not=20
Regards
Matthias
> -----Urspr=FCngliche Nachricht-----
> Von: SAP Workflow [mailto:Owner-SAP-WUG at MITVMA.MIT.EDU] Im=20
> Auftrag von Jose Burgman [AST]
> Gesendet: Montag, 30. September 2002 18:21
> An: SAP-WUG at MITVMA.MIT.EDU
> Betreff: Re: AW: getting an attribute
>=20
>=20
> The key gets passed across to VBAP OK during=20
> swc_get_property. When VBAP calls the method to get the=20
> material, the key for material seems to get scrambled - the=20
> sales document no and item no don't go across OK - the item=20
> contains the value VBAP (!) and sales doc no is a space.=20
> Obviously when looking up on the table it doesn't find the=20
> information.=20
>=20
> I tested the object VBAP in swo1, there it does it correctly.=20
> I looked on OSS and didn't find any references. So....I'm a=20
> bit stumped.
>=20
> Jose=20
>=20
> -----Original Message-----
>> From: Zmudzin,Tomasz,VEVEY,GL-DS/DM =
[mailto:Tomasz.Zmudzin at nestle.com]
> Sent: Monday, September 30, 2002 5:56 PM
> To: SAP-WUG at MITVMA.MIT.EDU
> Subject: Re: AW: getting an attribute
>=20
>=20
> Where exactly does this thing fail?=20
>=20
> Cheers, T.
>=20
> -----Original Message-----
>> From: Jose Burgman [AST] [mailto:jose.burgman at ast.co.za]
> Sent: Monday,30. September 2002 17:05
> To: SAP-WUG at MITVMA.MIT.EDU
> Subject: Re: AW: getting an attribute
>=20
>=20
> Hi there
>=20
> I tried this and it did not work. The key does not seem to=20
> get passed across when i try and get the attribute. It's=20
> probably something simple that I'm doing wrong, but blow me=20
> over if I can pick it up!
>=20
> Thanks.
>=20
> Jose
>=20
> -----Original Message-----
>> From: Zmudzin,Tomasz,VEVEY,GL-DS/DM =
[mailto:Tomasz.Zmudzin at nestle.com]
> Sent: Monday, September 30, 2002 3:13 PM
> To: SAP-WUG at MITVMA.MIT.EDU
> Subject: Re: AW: getting an attribute
>=20
>=20
> Actually I think the name of the container element misled=20
> Heinz -- you need an instance of VBAP to query its properties:
>=20
> SWC_CREATE_OBJECT VBAPOBJ 'VBAP' matobj. " or its part that=20
> contains the
> key
> SWC_GET_PROPERTY VBAPOBJ 'MATERIAL' matnr.
>=20
> Tomasz
>=20
>=20
> -----Original Message-----
>> From: Jose Burgman [AST] [mailto:jose.burgman at ast.co.za]
> Sent: Monday,30. September 2002 14:59
> To: SAP-WUG at MITVMA.MIT.EDU
> Subject: Re: AW: getting an attribute
>=20
>=20
> Material is an attribute of the object VBAP so an instance=20
> should exist - I think the problem is that the key from VBAP=20
> is not being passed across to the get property macro - these=20
> fields contain no value when I'm in debug mode in the macro itself.=20
>=20
> Jose
>=20
> -----Original Message-----
>> From: Schmidinger, Heinz (Unaxis IT BZ)=20
> [mailto:heinz.schmidinger at unaxis.com]
> Sent: Monday, September 30, 2002 2:43 PM
> To: SAP-WUG at MITVMA.MIT.EDU
> Subject: AW: getting an attribute
>=20
>=20
> is an instance of object 'BUS1001' avaiable at this time ?=20
> Otherwise maybe you shoud do swc_create_object 'BUS1001' mat_key
>=20
> -----Urspr=FCngliche Nachricht-----
> Von: Jose Burgman [AST] [mailto:jose.burgman at ast.co.za]=20
> Gesendet am: Montag, 30. September 2002 14:11
> An: SAP-WUG at MITVMA.MIT.EDU
> Betreff: getting an attribute
>=20
> Hi every-one
>=20
> Well, I've got to a point where I'm not sure how to proceed.=20
> I'm in the process of creating a standard role. The position=20
> is determined by the material number - I'm using BUS2030=20
> (Customer Inquiry)as a starting point. In BUS2030 the items=20
> are a multiline element (of type VBAP) - I pass this to my=20
> standard role and extract the table (of type VBAP, called=20
> material). I read the first line of the table and I seem to=20
> get a key. When I try and get the material property (also an=20
> object BUS1001), no information is returned. In debug mode it=20
> seems the key is not passed across and I get nothing back for=20
> my material, although the key shows in my extracted object.=20
>=20
> ie
> DATA: material TYPE swc_object OCCURS 0,
> matobj TYPE swc_object,
> matnr TYPE swc_object.
> =20
> swc_get_table ac_container 'Material' material. =3D=3D=3D=3D=3D>=20
> material filled with table
> READ TABLE material INDEX 1 INTO matobj. =3D=3D=3D=3D=3D=3D> matobj =
filled
> swc_get_property matobj 'Material' matnr. =3D=3D=3D=3D=3D> matnr =
not=20
> filled. In debug mode, the key in matobj is not passed across=20
> to the implementation program.
>=20
> Can any-one tell me what I'm doing wrong?
>=20
> Thanks
>=20
> Jose.
> ______________________________________________
>=20
> "This information is intended only for the person or entity=20
> to which it is addressed and may contain private,=20
> confidential, proprietary and/or privileged material and may=20
> be subject to confidentiality agreements.
>=20
> Any review, retransmission, dissemination, or any other use=20
> of or taking of any action in reliance upon this information,=20
> by persons or entities other than the intended recipient, is=20
> prohibited.
>=20
> If you received this in error, please contact the sender and=20
> delete the material from all storage media.
>=20
> The company is neither liable for proper, complete=20
> transmission of the information contained in this=20
> communication, any delay in its receipt or that the mail is=20
> virus-free" ______________________________________________
>=20
> "This information is intended only for the person or entity=20
> to which it is addressed and may contain private,=20
> confidential, proprietary and/or privileged material and may=20
> be subject to confidentiality agreements.
>=20
> Any review, retransmission, dissemination, or any other use=20
> of or taking of any action in reliance upon this information,=20
> by persons or entities other than the intended recipient, is=20
> prohibited.
>=20
> If you received this in error, please contact the sender and=20
> delete the material from all storage media.
>=20
> The company is neither liable for proper, complete=20
> transmission of the information contained in this=20
> communication, any delay in its receipt or that the mail is=20
> virus-free" ______________________________________________
>=20
> "This information is intended only for the person or entity=20
> to which it is addressed and may contain private,=20
> confidential, proprietary and/or privileged material and may=20
> be subject to confidentiality agreements.
>=20
> Any review, retransmission, dissemination, or any other use=20
> of or taking of any action in reliance upon this information,=20
> by persons or entities other than the intended recipient, is=20
> prohibited.
>=20
> If you received this in error, please contact the sender and=20
> delete the material from all storage media.
>=20
> The company is neither liable for proper, complete=20
> transmission of the information contained in this=20
> communication, any delay in its receipt or that the mail is=20
> virus-free" ______________________________________________
>=20
> "This information is intended only for the person or entity=20
> to which it is addressed and may contain private,=20
> confidential, proprietary and/or privileged material and may=20
> be subject to confidentiality agreements.
>=20
> Any review, retransmission, dissemination, or any other use=20
> of or taking of any action in reliance upon this information,=20
> by persons or entities other than the intended recipient, is=20
> prohibited.
>=20
> If you received this in error, please contact the sender and=20
> delete the material from all storage media.
>=20
> The company is neither liable for proper, complete=20
> transmission of the information contained in this=20
> communication, any delay in its receipt or that the mail is=20
> virus-free"
>=20
______________________________________________
"This information is intended only for the person or entity to which it =
is addressed and
may contain private, confidential, proprietary and/or privileged =
material and may be subject
to confidentiality agreements.
Any review, retransmission, dissemination, or any other use of or =
taking of any action in
reliance upon this information, by persons or entities other than the =
intended recipient,
is prohibited.
If you received this in error, please contact the sender and delete the =
material from all
storage media.
The company is neither liable for proper, complete transmission of the =
information contained
in this communication, any delay in its receipt or that the mail is =
virus-free"
More information about the SAP-WUG
mailing list