Buffer problem in SAP Workflow

Tue May 29 01:32:13 EDT 2012

Fredag 25. mai 2012 22.59.03 skrev Sanjay9 P:
> Hi Ionut,
> 
> Task already set to general task.. Still not working ...
> any other option ...???
There is a rare error that I have encountered twice (if I recall correct) in 
my 10+ years of workflow work: The runtime object is not generated (or not 
generated correctly/updated with the latest changes. Since you have tried a 
lot of other tricks without success, try generating the business object (on 
the application server where the error message occurs just to be on the safe 
side). If that helps I would afterwards go to each of the other servers and 
generate it there.

> 
> Sanjay Pal
> SAP Workflow Consultant
> Tata Consultancy Services
> 
>                         Business Solutions
>                         Outsourcing
> ____________________________________________
> 
> 
> 
> From:
> "Andronache, Ionut-Laurentiu" <ionut-laurentiu.andronache at sap.com>
> To:
> "SAP Workflow Users' Group" <sap-wug at mit.edu>
> Cc:
> "sap-wug-bounces at mit.edu" <sap-wug-bounces at mit.edu>
> Date:
> 05/25/2012 10:24 PM
> Subject:
> RE: Buffer problem in SAP Workflow
> Sent by:
> sap-wug-bounces at mit.edu
> 
> 
> 
> Hi Sanjay,
> 
> You need to check also that the task is set to general task.
> 
> 
> Regards,
> Ionut Andronache
> SAP ABAP/ Workflow Consultant, Near Shore Center Romania, SAP Consulting
> SAP Romania SRL
> Str. Tipografilor 11-15, Clădirea A1 /LA, Etajul 2, 013714,1 Bucureşti
> T + 40/ 31 225 28 73, F + 40/ 31 228 59 09, M +40/ 755 094 478
> mailto:ionut-laurentiu.andronache at sap.com
> www.sap.com
> Before printing, think about the environment
> Informatia continuta in acest comunicat este confidentiala, poate fi
> privilegiata si a fost conceputa spre a fi utilizata exclusiv de catre
> destinatarul mentionat mai sus. In cazul in care primiti acest comunicat
> din eroare, va rugam sa anuntati imediat expeditorul si sa-l stergeti,
> impreuna cu toate documentele atasate. Daca nu sunteti destinatarul caruia
> ii este adresat acest comunicat, va este interzisa citirea, copierea,
> difuzarea sau folosirea in orice fel a oricarei informatii din acesta fara
> consimtamantul dat de catre SAP Romania. Va rugam luati nota de faptul ca
> email-urile nu garanteaza nici confidentialitatea si nici receptia corecta
> a mesajului trimis, prin urmare SAP Romania nu se face responsabila de
> nici un prejudiciu cauzat.
> The information contained in this communication is confidential, may be
> privileged and is intended for the exclusive use of the above named
> addressee. If you receive this communication in error, please notify the
> sender immediately and delete it, and all its attached documents. If you
> are not the intended recipient, you are expressly prohibited from reading,
> copying, distributing, disseminating or, in any other way, using any of
> the information without the SAP Romania consent. Please note that Internet
> e-mail guarantees neither the confidentiality nor the proper receipt of
> the message sent, so that SAP Romania shall not be liable for any damages
> caused.
> 
> 
> 
> From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
> Of Sanjay9 P
> Sent: 25 May 2012 19:27
> To: SAP Workflow Users' Group
> Cc: sap-wug at mit.edu; sap-wug-bounces at mit.edu
> Subject: Buffer problem in SAP Workflow
> 
> Hi Experts,
> 
> My custom workflow is not getting triggered in QA as because "Entry not
> found in object buffer" in event trace. Please see the below screen shot.
> Following points should be noted.
> 1. Check function module used
> 2. Event linkage maintained properly
> 3. All the objects are present in QA in activated status
> 4. Same workflow is working fine in DEV
> 
> Is there any idea why we are getting this message in QA ?
> 
> 
> 
> Sanjay Pal
> SAP Workflow Consultant
> Tata Consultancy Services
> TCS, Unitech Hi-tech Structures Ltd.,
> IT/ITES SEZ, Block-G, Tower-G -III,
> Plot-DH01,DH02,DH03 & DH03/1, Action Area-I, New Town
> Kolkata - 700156,West Bengal
> India
> Ph:- +91 33 6636 1591
> Buzz:- 1591
> Cell:- 9038701729
> Mailto: sanjay9.p at tcs.com
> Website: http://www.tcs.com
> ____________________________________________
> Experience certainty.        IT Services
>                        Business Solutions
>                        Outsourcing
> ____________________________________________
> 
> 
> From:
> Altaf <rahaman.ma at gmail.com>
> To:
> "sap-wug at mit.edu" <sap-wug at mit.edu>
> Cc:
> "sap-wug at mit.edu" <sap-wug at mit.edu>
> Date:
> 05/25/2012 06:22 AM
> Subject:
> Re: SAP-WUG Digest, Vol 90, Issue 17
> Sent by:
> sap-wug-bounces at mit.edu
> 
> 
> 
> 
> 
> Hi,
> 
> For issue no 1 I will check the scenario and will post you.
> Issue no 2 you can set the confirm end processing at the task/step so
> that even after execution of work item you can hold it, the workitem
> will be executed but will not be in completed status, you can re
> execute workitem later.
> 
> Regards,
> Altaf Mohammed
> 9703322553
> 
> On 24-May-2012, at 10:00 PM, sap-wug-request at mit.edu wrote:
> > Send SAP-WUG mailing list submissions to
> > 
> >    sap-wug at mit.edu
> > 
> > To subscribe or unsubscribe via the World Wide Web, visit
> > 
> >    http://mailman.mit.edu/mailman/listinfo/sap-wug
> > 
> > or, via email, send a message with subject or body 'help' to
> > 
> >    sap-wug-request at mit.edu
> > 
> > You can reach the person managing the list at
> > 
> >    sap-wug-owner at mit.edu
> > 
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of SAP-WUG digest..."
> > 
> > Today's Topics:
> >   1. Problem while calling a standard SAP transaction inside
> >   
> >      workflow (Srinivas Reddy)
> > 
> > ----------------------------------------------------------------------
> > 
> > Message: 1
> > Date: Thu, 24 May 2012 16:59:44 +0530
> > From: Srinivas Reddy <ootasrinivasreddy at gmail.com>
> > Subject: Problem while calling a standard SAP transaction inside
> > 
> >    workflow
> > 
> > To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
> > 
> > Message-ID:
> >    <CAGu01YZ-
> > 
> > M5V9MPRfkpzFyDN8ri9Dnr=CfEXebpx7fNP2axU8Cg at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> > 
> > Hello Experts,
> > 
> > 
> > 
> > I am facing a strange issue in my workflow development. The workflow
> > will
> > be started after clicking on POST button in the standard transaction
> > MI04.
> > I have used the standard  event created from the business object
> > BUS2028
> > for starting the workflow. After starting the workflow I am calling
> > the
> > standard transaction MI07 in the very first step which will be sent
> > to the
> > approver. Once the approver clicks on POST an email will be sent and
> > the
> > document will be posted.
> > 
> > 
> > 
> > Issue 1) When the user manually goes into the SAP transaction MI07 ,
> > opens
> > a document and clicks on back, cancel or exit buttons. The
> > transaction is
> > working as desired but the same thing  when the same user does from
> > executing the work item the transaction is not working as desired. A
> > pop-up
> > screen with YES, NO and CANCEL buttons and also a message  whether
> > to SAVE
> > before exit is displayed. Even though if the user clicks on NO
> > button the
> > document is getting posted. No idea what is going wrong with the
> > method
> > calling the transaction MI07.
> > 
> > Issue 2) Once the users does this process. The work item is getting
> > completed. But the requirement is, work item should be available as
> > the
> > POSTING is not completed. Here how can I put the work item in ready
> > status
> > after completeion. Once the users executes the work item the work
> > item is
> > getting disappeared.
> > 
> > 
> > Where am I doing wrong?
> 
> http://mailman.mit.edu/pipermail/sap-wug/attachments/20120524/c5d65341/attac
> hment-0001.htm
> > ------------------------------
> > 
> > _______________________________________________
> > SAP-WUG mailing list
> > SAP-WUG at mit.edu
> > http://mailman.mit.edu/mailman/listinfo/sap-wug
> > 
> > 
> > End of SAP-WUG Digest, Vol 90, Issue 17
> > ***************************************
> 
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
> 
> =====-----=====-----=====
> Notice: The information contained in this e-mail
> message and/or attachments to it may contain
> confidential or privileged information. If you are
> not the intended recipient, any dissemination, use,
> review, distribution, printing or copying of the
> information contained in this e-mail message
> and/or attachments to it are strictly prohibited. If
> you have received this communication in error,
> please notify us by reply e-mail or telephone and
> immediately and permanently delete the message
> and any attachments. Thank you
> _______________________________________________
> SAP-WUG mailing list
> SAP-WUG at mit.edu
> http://mailman.mit.edu/mailman/listinfo/sap-wug
-- 
Kjetil Kilhavn (+47 40220607) - Blue Consulting AS (http://www.bluec.no)