Launch of SAP work items in UWL

Shai Eyal shai.eyal at yahoo.com
Sat Jul 4 14:05:45 EDT 2009 

Dear Srinivas,

Please bear in mind that "Advance with dialog" feature does not exists within UWL. This is why it behaves differently than SBWP.
However if your requirement is to enter confirmation notes once the user makes the decision then I'd suggest configuring the XML section of the decision task such that it'll contain sub-window for notes and the user must enter text within prior to making the decision.

You can browse through this forum to find the exact XML source. It also exists is "Universal Worklist with SAP NetWeaver Portal " by Darren Hague .
 
Good luck.

Regards,
Shai Eyal
SAP Logistics senior consultant
SAP Workflow & BPM specialist
http://www.linkedin.com/in/shaieyal
Mobile: 972-52-5816633




________________________________
From: "sap-wug-request at mit.edu" <sap-wug-request at mit.edu>
To: sap-wug at mit.edu
Sent: Saturday, July 4, 2009 19:09:12
Subject: SAP-WUG Digest, Vol 56, Issue 9

Send SAP-WUG mailing list submissions to
    sap-wug at mit.edu

To subscribe or unsubscribe via the World Wide Web, visit
    http://mailman.mit.edu/mailman/listinfo/sap-wug
or, via email, send a message with subject or body 'help' to
    sap-wug-request at mit.edu

You can reach the person managing the list at
    sap-wug-owner at mit.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of SAP-WUG digest..."


Today's Topics:

  1. Launch of SAP work items in UWL (Srinivas VELMA)


----------------------------------------------------------------------

Message: 1
Date: Fri, 3 Jul 2009 18:25:04 -0700 (PDT)
From: Srinivas VELMA <velma.home at rogers.com>
Subject: Launch of SAP work items in UWL
To: sap-wug at mit.edu
Message-ID: <437336.49304.qm at web88205.mail.re2.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi Jocelyn,
?
Thanks for responding and I'm sorry for confusing you. I will try to rephrase it.
Ours is EP7.0 with ECC 6.0. This is regarding the launch behavior of the work items from UWL for Work Order Workflow.
The requirement is,when the work item is clicked, it should behave in the same way as if the user had clicked on the item in SBWP.?And it should be in synchronous dialog chain.
This is not being acheived.
In UWL, when we accept or reject the workitem, we?have to refresh and?click again?to add the confirmation notes for acceptance or reject of the user decision.
What I have checked:
1) In Display support Information, the?handler is SAP TransactionLaunch for these work items.
2) In iview of Launch SAP Transaction - SAP GUI property is SAP GUI for windows
3) Uploaded the webflow xml.ECC file including the tasks with SAP Transaction Launch handler in Action tag and?GuiType with value WinGUI in Property tag.
4) Cleared the cache after configuration and re-register the system.
But the other work items belonging to Invoice?workflow and PO workflow in UWL, they are synchronous and launch as they we are opening in SBWP. Why the Work order work items are?launching differently and not synchronous?in UWL(They are synchronous in SBWP)?compared to the workitems of?other workflows.
Can you please suggest what I'm missing?
Thanks for all the help.

Regards,
Anuradha.
________________________________

From: sap-wug-bounces at mit.edu on behalf of Srinivas VELMA
Sent: Sat 27/06/2009 9:07 AM
To: sap-wug at mit.edu
Cc: radhika_anu at hotmail.com
Subject: [LIKELY JUNK]Launch of SAP work items in UWL


Hi,

Thanks for the help.
We have three different workflows - PO, Invoice and work order PO. 
When we open PO and Invoice work items from UWL , they open the same as opened in SBWP(SAP Launch Transaction)
But when we open PO work order workitem, they open as that we see in the portal.
My issue is PO work order should also behave the same as Invoice(as that in SBWP).
Our UWL configuration is not task based-it is same for all the tasks.So it should behave same for all the tasks.
Can anyone suggest how can I solve and what I need to check.
Thanks again.

Regards,
Anuradha.



------------------------------

Message: 2
Date: Tue, 30 Jun 2009 07:12:26 +0200
From: lazzy bones <lazzyb at gmail.com>
Subject: Leave Workflow SAP PT_TIMREQ
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
??? <df8a51af0906292212i6f957caeh46aa1b93b88563ec at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi,

I have never worked with ABAP Classes in Workflow, but I need to add an
extra approver step, can anyone help me, if I just copy the current approver
step then it processes the leave application immediately,

please help,
Regards
Yaseen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20090630/c87495c1/attachment-0001.htm

------------------------------

Message: 3
Date: Tue, 30 Jun 2009 09:21:21 +0100
From: "Vijayendra Rao (Absoft)" <vrao at absoft.co.uk>
Subject: How to complete the workitems hanging due to break-point in
??? the code?
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID: <2C9B4CD8BAE97847924AF9B2233248C7011FD29D at ABSM01>
Content-Type: text/plain; charset="us-ascii"

Hi Guys,



We recently moved a transport to Production environment and we left a
BREAK-POINT command in one of the method in the workflow. This caused
the workflow to hang at this point. We have now corrected the issue and
moved back the transport to production. Is there any way we can complete
the workflows hanging due to the break-point? 



We are on Sap ECC 5.0. 

Thanks in anticipation. 



Kind Regards,

VJ



Vijayendra Rao

SAP Consultant



Absoft Limited

Tel: +44 (0)1224 707088

Fax: +44 (0)1224 707099

Email: vrao at absoft.co.uk <mailto:vrao at absoft.co.uk> 

Web: www.absoft.co.uk <http://www.absoft.co.uk/> 



Unlocking your business potential with SAP(r) Software Solutions



Absoft is a SAP(r) Business Partner providing:

- strategic advice

- full implementation services

- system development and upgrades

- system and user support

- training



________________________________________________



The information in this e-mail is confidential and for use by the
addressee(s) only. It may also be privileged. Please advise the sender
by telephone on +44 (0)1224 707088 if this message has been sent in
error to the wrong address and delete the message from your computer:
You may not copy or forward it, or use or disclose its contents to any
other person. We acknowledge that e-mail is not an entirely secure
medium of communication and you should be aware of this when replying.
We do not accept any liability or responsibility for (1) changes made to
this email after it was sent, or (2) viruses transmitted through this
email or any attachment. Absoft Limited, a company registered in
Scotland (Registered No. 129581) and having its registered office at
Davidson House, Campus 1, Aberdeen Science & Technology Park, Bridge of
Don, Aberdeen, AB22 8GT.







-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20090630/59a89f5e/attachment-0001.htm

------------------------------

Message: 4
Date: Tue, 30 Jun 2009 16:26:51 +0530
From: "Vinod Viswanathan" <Vinod.Viswanathan at in.fujitsu.com>
Subject: RE: IDoc creation at last save only
To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
Message-ID:
??? <5AC5F6D093559448A9E0D8AB279EF31D0538D147 at pune-mail1.india.rapidigm.com>
??? 
Content-Type: text/plain; charset="us-ascii"

Hi,

I am answering under the assumption that you have a custom workflow
object in this case... (if not, then its required)

I do not know of such a capability in workflow.? You need to
customize/modify the FM that does the post processing of the IDoc before
sending it and attach it to a custom BOR method. 

Pls let me know if this helped!

Regards,

Vinod

________________________________

From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Loren Huffman
Sent: Wednesday, June 24, 2009 1:47 AM
To: SAP Workflow Users' Group
Subject: IDoc creation at last save only



Hello,



We have a workflow to approve outbound PO's in place. We are now going
to send these PO's to our vendors via EDI but I only want to send the
last IDoc not each one that is created when the PO is approved and
saved. Anyone familiar with this? Is there a setting somewhere or is it
something in the WF that needs to be added?



Thanks,

Loren



DISCLAIMER:
This e-mail and any attached files may contain confidential and/or privileged material for the sole use of the intended recipient.? Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive this e-mail for the recipient), you may not review, copy or distribute this message.? Please contact the sender by reply e-mail and delete all copies of this message:Fujitsu Consulting India Pvt Limited
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20090630/e009549e/attachment.htm

------------------------------

_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug


End of SAP-WUG Digest, Vol 55, Issue 61
***************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20090703/3f27f524/attachment-0001.htm

------------------------------

_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug


End of SAP-WUG Digest, Vol 56, Issue 9
**************************************



      Get your new Email address!
Grab the Email name you&#39;ve always wanted before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20090704/6a9353df/attachment.htm

More information about the SAP-WUG mailing list