Object Visualization in UWL using WebDynpros

Wed Oct 24 22:21:57 EDT 2007

WI_ID=${item.externalId}  worked for me on SP12

0012  SAPKB70012  SAP Basis Component  Basis Support Pkg.  
0012  SAPKA70012  Cross-Application Component  Appl. Interface SP  
0013  SAPKIPYJ7D  PI_BASIS 2005_1_700  Component Supp. Pkg.  
0001  SAPKITLQI1  SAP Solution Tools Plug-In  

I receive WI_ID on default plug OK.

Is it perhaps a PORTAL patch that is making the difference ?
sap.com  UWLJWF  7.00 SP13 (1000.7.00.13.0.20070812125223)  SAP AG  SAP
AG  20071019230128  

-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Dart, Jocelyn
Sent: Thursday, October 25, 2007 10:14 AM
To: SAP Workflow Users' Group
Subject: RE: Object Visualization in UWL using WebDynpros

Hi Ruben, 
Ah yes ... come to think of it I knew there was a fix because I asked
for it and we have it working at one of my customer sites - couldn't
remember which SP though.  So at least I can confirm it does work once
you get the patch in.  

Regards,
Jocelyn Dart
Senior Consultant
SAP Australia Pty Ltd.
Level 1/168 Walker St.
North Sydney 
NSW, 2060
Australia
T   +61 412 390 267
M   + 61 412 390 267
E   jocelyn.dart at sap.com
http://www.sap.com

The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents. 
Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.
Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated. 

-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of Ruben Baldassarri
Sent: Thursday, 25 October 2007 9:54 AM
To: SAP Workflow Users' Group
Subject: RE: Object Visualization in UWL using WebDynpros

Hi Jocelyn,

Unfortunately, it didn't work.
But as you say, apparently there is a bug which is fixed with SPS13 
(we currently have SPS12).
The SP Stack 13 is scheduled to be applied in a week, or so.
I guess I'll have to wait until then to try again.

I wish to thank you for your valuable help.

With best regards,
Ruben

At 12:57 a.m. 24/10/2007, you wrote:
>Hi Ruben,
>Try ${item.externalObjectId} for the object key.
>There is a bug on certain support packs with the dynamic parameters
>being filled correctly for object visualization ... so check for a note
>and if you can't find one report it.
>
>
>Regards,
>Jocelyn Dart
>Senior Consultant
>SAP Australia Pty Ltd.
>Level 1/168 Walker St.
>North Sydney
>NSW, 2060
>Australia
>T   +61 412 390 267
>M   + 61 412 390 267
>E   jocelyn.dart at sap.com
>http://www.sap.com
>
>The information contained in or attached to this electronic
transmission
>is confidential and may be legally privileged. It is intended only for
>the person or entity to which it is addressed. If you are not the
>intended recipient, you are hereby notified that any distribution,
>copying, review, retransmission, dissemination or other use of this
>electronic transmission or the information contained in it is strictly
>prohibited. If you have received this electronic transmission in error,
>please immediately contact the sender to arrange for the return of the
>original documents.
>Electronic transmission cannot be guaranteed to be secure and
>accordingly, the sender does not accept liability for any such data
>corruption, interception, unauthorized amendment, viruses, delays or
the
>consequences thereof.
>Any views expressed in this electronic transmission are those of the
>individual sender, except where the message states otherwise and the
>sender is authorized to state them to be the views of SAP AG or any of
>its subsidiaries. SAP AG, its subsidiaries, and their directors,
>officers and employees make no representation nor accept any liability
>for the accuracy or completeness of the views or information contained
>herein. Please be aware that the furnishing of any pricing information/
>business proposal herein is indicative only, is subject to change and
>shall not be construed as an offer or as constituting a binding
>agreement on the part of SAP AG or any of its subsidiaries to enter
into
>any relationship, unless otherwise expressly stated.
>
>
>-----Original Message-----
>From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
Behalf
>Of Ruben Baldassarri
>Sent: Wednesday, 24 October 2007 1:19 PM
>To: SAP Workflow Users' Group
>Subject: RE: Object Visualization in UWL using WebDynpros
>
>
>Hi Jocelyn,
>
>Thank you very much.
>
>As you suggested, the explicit method name was the problem (weird,
isn't
>it?).
>Now the attachment link is launching my webdynpro application, as it
>should.
>
>However, it seems to be another problem.
>The workitem ID passed from UWL to the WDA is null.
>I defined in SWFVISU the following: DYNPARAM: WI_ID=${item.externalId}
>Is there any other way to pass as a parameter to my WDA either the
>workitem ID or the object key?
>
>I'm on ECC 6.0 and EP 7.0.
>
>Thanks in advance,
>Ruben
>
>
>At 09:52 p.m. 22/10/2007, you wrote:
> >Ruben,
> >For object visualization, you need to leave the method name empty -
> >i.e. blank.  Then re-register the system and clear the cache.  Once
> >this is done your webdynpro application will be used for the
attachment
>links.
> >
> >
> >Regards,
> >Jocelyn Dart
> >Senior Consultant
> >SAP Australia Pty Ltd.
> >Level 1/168 Walker St.
> >North Sydney
> >NSW, 2060
> >Australia
> >T   +61 412 390 267
> >M   + 61 412 390 267
> >E   jocelyn.dart at sap.com
> >http://www.sap.com
> >
> >-----Original Message-----
> >From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
> >Behalf Of Ruben Baldassarri
> >Sent: Friday, 19 October 2007 12:06 AM
> >To: SAP Workflow Users' Group
> >Subject: [LIKELY JUNK]Object Visualization in UWL using WebDynpros
> >
> >Hi all,
> >
> >We are currently developing a Workflow that runs under
> >Portal using UWL and WebDynpros for ABAP.
> >The relations between tasks and webdynpro applications
> >were set using transaction SWFVISU and re-registering
> >the backend system in the UWL administration.
> >This is working fine.
> >
> >So far, so good.
> >Now we need that when users want to display the object
> >(the first link in attachments in the UWL) instead of
> >trying to execute method DISPLAY (the default method)
> >of the BOR Object, it launches a WebDynpro.
> >We configured again in transaction SWFVISU, under
> >'Object visualization' node, with these visualization
> >Parameters:
> >
> >
> >Object Category: BO
> >Object Type: MyObject
> >Method Name: DISPLAY
> >Visualization Type: ABAP Web Dynpro
> >
> >APPLICATION: MyWebDynproApplication
> >DYNPARAM: WI_ID=${item.externalId}
> >NAMESPACE: sap
> >
> >and asked the Portal administrators to re-register the
> >backed system again, which they did.
> >
> >
> >However, when we test displaying the object in UWL, we
> >still got this error:
> >
> >"An exception ocurred while processing a request for:
>
>iView:pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uw
>l.uwlSapLaunch
> >Component Name:
> >com.sap,.portal.appintegrator.sap.Transaction
> >
> >Exception in SAP Application Integrator occured:
> >Application URL ':///sap
>
>(ZT1mU1ppc3d3T0JSRGdYQzZ2aGhEMII3JTNEJTJCQ2RZWWhyS0JPQkEybmIUVnJDVUhnJT
>NEJNE)/bc/gui/sap/its/webgui'
> >is not valid!
> >Please check the protocol and host entries for system
> >'SAPLX0ARG'..
> >Exception id: 07:19_17/10/07_0011_1793750
> >See the details for the exception ID in the log file"
> >
> >
> >I've searched in SDN, sap-wug, and Google but I
> >couldn't find further documentation on how to
> >configure object visualization using SWFVISU.
> >
> >
> >Please, any help or idea will be highly appreciated.
> >
> >Best regards,
> >Ruben
>
>
>_______________________________________________
>SAP-WUG mailing list
>SAP-WUG at mit.edu
>http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>_______________________________________________
>SAP-WUG mailing list
>SAP-WUG at mit.edu
>http://mailman.mit.edu/mailman/listinfo/sap-wug

_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug

_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug