Object Visualization in UWL using WebDynpros

Wed Oct 24 19:53:58 EDT 2007

Hi Jocelyn,

Unfortunately, it didn't work.
But as you say, apparently there is a bug which is fixed with SPS13 
(we currently have SPS12).
The SP Stack 13 is scheduled to be applied in a week, or so.
I guess I'll have to wait until then to try again.

I wish to thank you for your valuable help.

With best regards,
Ruben

At 12:57 a.m. 24/10/2007, you wrote:
>Hi Ruben,
>Try ${item.externalObjectId} for the object key.
>There is a bug on certain support packs with the dynamic parameters
>being filled correctly for object visualization ... so check for a note
>and if you can't find one report it.
>
>
>Regards,
>Jocelyn Dart
>Senior Consultant
>SAP Australia Pty Ltd.
>Level 1/168 Walker St.
>North Sydney
>NSW, 2060
>Australia
>T   +61 412 390 267
>M   + 61 412 390 267
>E   jocelyn.dart at sap.com
>http://www.sap.com
>
>The information contained in or attached to this electronic transmission
>is confidential and may be legally privileged. It is intended only for
>the person or entity to which it is addressed. If you are not the
>intended recipient, you are hereby notified that any distribution,
>copying, review, retransmission, dissemination or other use of this
>electronic transmission or the information contained in it is strictly
>prohibited. If you have received this electronic transmission in error,
>please immediately contact the sender to arrange for the return of the
>original documents.
>Electronic transmission cannot be guaranteed to be secure and
>accordingly, the sender does not accept liability for any such data
>corruption, interception, unauthorized amendment, viruses, delays or the
>consequences thereof.
>Any views expressed in this electronic transmission are those of the
>individual sender, except where the message states otherwise and the
>sender is authorized to state them to be the views of SAP AG or any of
>its subsidiaries. SAP AG, its subsidiaries, and their directors,
>officers and employees make no representation nor accept any liability
>for the accuracy or completeness of the views or information contained
>herein. Please be aware that the furnishing of any pricing information/
>business proposal herein is indicative only, is subject to change and
>shall not be construed as an offer or as constituting a binding
>agreement on the part of SAP AG or any of its subsidiaries to enter into
>any relationship, unless otherwise expressly stated.
>
>
>-----Original Message-----
>From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
>Of Ruben Baldassarri
>Sent: Wednesday, 24 October 2007 1:19 PM
>To: SAP Workflow Users' Group
>Subject: RE: Object Visualization in UWL using WebDynpros
>
>
>Hi Jocelyn,
>
>Thank you very much.
>
>As you suggested, the explicit method name was the problem (weird, isn't
>it?).
>Now the attachment link is launching my webdynpro application, as it
>should.
>
>However, it seems to be another problem.
>The workitem ID passed from UWL to the WDA is null.
>I defined in SWFVISU the following: DYNPARAM: WI_ID=${item.externalId}
>Is there any other way to pass as a parameter to my WDA either the
>workitem ID or the object key?
>
>I'm on ECC 6.0 and EP 7.0.
>
>Thanks in advance,
>Ruben
>
>
>At 09:52 p.m. 22/10/2007, you wrote:
> >Ruben,
> >For object visualization, you need to leave the method name empty -
> >i.e. blank.  Then re-register the system and clear the cache.  Once
> >this is done your webdynpro application will be used for the attachment
>links.
> >
> >
> >Regards,
> >Jocelyn Dart
> >Senior Consultant
> >SAP Australia Pty Ltd.
> >Level 1/168 Walker St.
> >North Sydney
> >NSW, 2060
> >Australia
> >T   +61 412 390 267
> >M   + 61 412 390 267
> >E   jocelyn.dart at sap.com
> >http://www.sap.com
> >
> >-----Original Message-----
> >From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
> >Behalf Of Ruben Baldassarri
> >Sent: Friday, 19 October 2007 12:06 AM
> >To: SAP Workflow Users' Group
> >Subject: [LIKELY JUNK]Object Visualization in UWL using WebDynpros
> >
> >Hi all,
> >
> >We are currently developing a Workflow that runs under
> >Portal using UWL and WebDynpros for ABAP.
> >The relations between tasks and webdynpro applications
> >were set using transaction SWFVISU and re-registering
> >the backend system in the UWL administration.
> >This is working fine.
> >
> >So far, so good.
> >Now we need that when users want to display the object
> >(the first link in attachments in the UWL) instead of
> >trying to execute method DISPLAY (the default method)
> >of the BOR Object, it launches a WebDynpro.
> >We configured again in transaction SWFVISU, under
> >'Object visualization' node, with these visualization
> >Parameters:
> >
> >
> >Object Category: BO
> >Object Type: MyObject
> >Method Name: DISPLAY
> >Visualization Type: ABAP Web Dynpro
> >
> >APPLICATION: MyWebDynproApplication
> >DYNPARAM: WI_ID=${item.externalId}
> >NAMESPACE: sap
> >
> >and asked the Portal administrators to re-register the
> >backed system again, which they did.
> >
> >
> >However, when we test displaying the object in UWL, we
> >still got this error:
> >
> >"An exception ocurred while processing a request for:
> >iView:pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uw
>l.uwlSapLaunch
> >Component Name:
> >com.sap,.portal.appintegrator.sap.Transaction
> >
> >Exception in SAP Application Integrator occured:
> >Application URL ':///sap
> >(ZT1mU1ppc3d3T0JSRGdYQzZ2aGhEMII3JTNEJTJCQ2RZWWhyS0JPQkEybmIUVnJDVUhnJT
>NEJNE)/bc/gui/sap/its/webgui'
> >is not valid!
> >Please check the protocol and host entries for system
> >'SAPLX0ARG'..
> >Exception id: 07:19_17/10/07_0011_1793750
> >See the details for the exception ID in the log file"
> >
> >
> >I've searched in SDN, sap-wug, and Google but I
> >couldn't find further documentation on how to
> >configure object visualization using SWFVISU.
> >
> >
> >Please, any help or idea will be highly appreciated.
> >
> >Best regards,
> >Ruben
>
>
>_______________________________________________
>SAP-WUG mailing list
>SAP-WUG at mit.edu
>http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>_______________________________________________
>SAP-WUG mailing list
>SAP-WUG at mit.edu
>http://mailman.mit.edu/mailman/listinfo/sap-wug