SAP-WUG Digest, Vol 30, Issue 58
Dart, Jocelyn
jocelyn.dart at sap.com
Wed May 23 03:57:43 EDT 2007
Look for service webgui
Regards,
Jocelyn Dart
Senior Consultant
SAP Australia Pty Ltd.
Level 1/168 Walker St.
North Sydney
NSW, 2060
Australia
T +61 412 390 267
M + 61 412 390 267
E jocelyn.dart at sap.com
http://www.sap.com <http://www.sap.com/>
The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents.
Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.
Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated.
________________________________
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of patrick.j.de-valensart at gskbio.com
Sent: Tuesday, 22 May 2007 6:52 PM
To: sap-wug at mit.edu
Subject: Re: SAP-WUG Digest, Vol 30, Issue 58
Hi Jocelyn,
I thought ITS was *not* integrated into 6.20. Do you know which service
I have to activate in SICF and point to in the system alias config? Is
there any doco on that somewhere (I didn't find anything on sdn).
Thanks a lot and regards,
Patrick
----- Message from "Dart, Jocelyn" <jocelyn.dart at sap.com> on Tue, 22 May
2007 08:15:14 +0800 -----
To:
"SAP Workflow Users' Group" <sap-wug at mit.edu>
Subject:
RE: Connect UWL to WAS 6.20 without ITS?
Hi Patrick,
Check the System Alias you are using to connect to your backend system
is configured correctly.
And remember that even in a 6.20 your ITS is essentially just another
service in transaction SICF - it is not a separate server.
Regards,
Jocelyn Dart
Senior Consultant
SAP Australia Pty Ltd.
Level 1/168 Walker St.
North Sydney
NSW, 2060
Australia
T +61 412 390 267
M + 61 412 390 267
E jocelyn.dart at sap.com
http://www.sap.com <http://www.sap.com/>
The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents.
Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.
Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated.
________________________________
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of patrick.j.de-valensart at gskbio.com
Sent: Tuesday, 22 May 2007 5:55 AM
To: sap-wug at mit.edu
Subject: Re: Connect UWL to WAS 6.20 without ITS?
Hi Mike,
But then what am I missing? When I try to register my connection in UWL
config I am getting the following messages:
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Mon May
21 21:52:55 CEST 2007
(Connector) :javax.resource.ResourceException:Failed getting the
following function metadata from repository: URL_SERVER_TYPE_DATA_GET
I thought not having ITS might be the issue because SAP Help says a
prerequisite to configure UWL is that "Each connected SAP system for
back end system (below release 7.0, WP-PI plug-in 6.0) has the
connection to its respective SAP Internet Transaction Server (ITS)".
Hope you (or anyone else) can shed some light on this.
Thanks in advance and kind regards,
Patrick
----- Message from "Mike Pokraka" <asap at workflowconnections.com> on Mon,
21 May 2007 15:21:18 +0100 (BST) -----
To:
"SAP Workflow Users' Group" <sap-wug at mit.edu>
Subject:
Re: Connect UWL to WAS 6.20 without ITS?
Hi Patrick,
This is certainly possible since the UWL itself doesn't run on ITS.
Where you may run into trouble is if you are trying to execute non-webby
workitems that call transactions. To my knowledge these tasks use WebGUI
rendered using the ITS. If all you're using are Java, Decisions, BSPs
and
other web tasks then you're a-ok.
In 640 onwards ITS is integrated into the WAS so all your problems will
disappear.
Hope that helps,
Mike
(cross-answered on WUG and SDN :-)
On Mon, May 21, 2007 2:25 pm, patrick.j.de-valensart at gskbio.com wrote:
>
>
> Hello,
>
> Does anyone out there know if it is possible to connect an universal
> worklist running on EP 7.0 to an R/3 system running on was 6.20
without
> using an ITS?
>
> We do not have any ITS, but we would still like to go live now with
UWL.
> And we are upgrading our R/3 to NW2004s in only a bit less than a
year...
>
> Thanks in advance for your help and kind regards,
>
> Patrick de Valensart
>
> (Cross posted on WUG and SDN)
>
The information contained in this message is confidential and is
intended for the addressee(s) only. This information may also be legally
privileged. If you have received this message in error or there are any
problems please notify the originator immediately. The unauthorized use,
disclosure, copying or alteration of this message is strictly forbidden.
GlaxoSmithKline Biologicals will not be liable for direct, special,
indirect or consequential damages arising from alteration of the
contents of this message by a third party or as a result of any virus
being passed on.
L'information contenue dans ce message est confidentielle et dediee
exclusivement au(x) destinataire(s). Cette information peut egalement
etre de nature legalement privilegiee. Si vous avez recu ce message par
erreur ou s'il y a un probleme, priere d'en avertir l'expediteur
immediatement. L'usage illicite, la divulgation, la copie ou la
modification de ce message sont strictement interdits. GlaxoSmithKline
Biologicals ne peut etre tenue responsable des dommages directs,
speciaux, indirects ou consecutifs resultant de la modification du
contenu du message par un tiers ou d'un virus transmis avec le message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/sap-wug/attachments/20070523/6cf7fc6d/attachment.htm
More information about the SAP-WUG
mailing list