doubt regd. change document objects

Mon Oct 10 20:29:44 EDT 2005

Hi Vijay, 
On Creation only has a "new" document and no "old" document - so the
field comparison is not really relevant.  
You might be better off using a start condition on top of your "created"
event.  

Regards,
Jocelyn Dart
Senior Consultant
SAP Australia Pty Ltd.
Level 1/168 Walker St.
North Sydney 
NSW, 2060
Australia
T   +61 412 390 267
M   + 61 412 390 267
E   jocelyn.dart at sap.com
http://www.sap.com

The information contained in or attached to this electronic transmission
is confidential and may be legally privileged. It is intended only for
the person or entity to which it is addressed. If you are not the
intended recipient, you are hereby notified that any distribution,
copying, review, retransmission, dissemination or other use of this
electronic transmission or the information contained in it is strictly
prohibited. If you have received this electronic transmission in error,
please immediately contact the sender to arrange for the return of the
original documents. 
Electronic transmission cannot be guaranteed to be secure and
accordingly, the sender does not accept liability for any such data
corruption, interception, unauthorized amendment, viruses, delays or the
consequences thereof.
Any views expressed in this electronic transmission are those of the
individual sender, except where the message states otherwise and the
sender is authorized to state them to be the views of SAP AG or any of
its subsidiaries. SAP AG, its subsidiaries, and their directors,
officers and employees make no representation nor accept any liability
for the accuracy or completeness of the views or information contained
herein. Please be aware that the furnishing of any pricing information/
business proposal herein is indicative only, is subject to change and
shall not be construed as an offer or as constituting a binding
agreement on the part of SAP AG or any of its subsidiaries to enter into
any relationship, unless otherwise expressly stated. 

-----Original Message-----
From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On Behalf
Of vijay srikanth
Sent: Monday, 10 October 2005 8:35 PM
To: sap-wug at mit.edu
Subject: RE: doubt regd. change document objects

Hi Jocelyn,

I had actually linked the On Create radio button, to a business object
event 
in order to trigger a workflow. In that case I was wondering what should
be 
the field change restriction value. It will obviously be from * to
whatever 
value we input in the field. But had noticed that when the document was 
actually created, with that value in the field (for eg. a delivery block
in 
sales order VBAK-LIFSK) it was not calling the business object event. It

also maybe some unnoticed error, I'm rectifying it....Thanks for the
inputs 
though.

Regards,
Vijay

>From: "Dart, Jocelyn" <jocelyn.dart at sap.com>
>Reply-To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
>To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
>Subject: RE: doubt regd. change document objects
>Date: Mon, 10 Oct 2005 16:02:48 +0800
>
>Vijay,
>Change document object events are based on the change document being
>created.
>If you look at your change documents you will see that on creation of a
>sales order only
>an "insert" i.e. creation change document is created.  Therefore only
>the "On Creation"
>option is applicable in your scenario.
>
>
>
>Regards,
>Jocelyn Dart
>Senior Consultant
>SAP Australia Pty Ltd.
>Level 1/168 Walker St.
>North Sydney
>NSW, 2060
>Australia
>T   +61 412 390 267
>M   + 61 412 390 267
>E   jocelyn.dart at sap.com
>http://www.sap.com
>
>The information contained in or attached to this electronic
transmission
>is confidential and may be legally privileged. It is intended only for
>the person or entity to which it is addressed. If you are not the
>intended recipient, you are hereby notified that any distribution,
>copying, review, retransmission, dissemination or other use of this
>electronic transmission or the information contained in it is strictly
>prohibited. If you have received this electronic transmission in error,
>please immediately contact the sender to arrange for the return of the
>original documents.
>Electronic transmission cannot be guaranteed to be secure and
>accordingly, the sender does not accept liability for any such data
>corruption, interception, unauthorized amendment, viruses, delays or
the
>consequences thereof.
>Any views expressed in this electronic transmission are those of the
>individual sender, except where the message states otherwise and the
>sender is authorized to state them to be the views of SAP AG or any of
>its subsidiaries. SAP AG, its subsidiaries, and their directors,
>officers and employees make no representation nor accept any liability
>for the accuracy or completeness of the views or information contained
>herein. Please be aware that the furnishing of any pricing information/
>business proposal herein is indicative only, is subject to change and
>shall not be construed as an offer or as constituting a binding
>agreement on the part of SAP AG or any of its subsidiaries to enter
into
>any relationship, unless otherwise expressly stated.
>
>
>-----Original Message-----
>From: sap-wug-bounces at mit.edu [mailto:sap-wug-bounces at mit.edu] On
Behalf
>Of vijay srikanth
>Sent: Saturday, 08 October 2005 6:24 PM
>To: sap-wug at mit.edu
>Subject: Re: doubt regd. change document objects
>
>
>Hi Ramanan,
>
>Thanks for the info. I have done all this already...
>The problem that I had problem with it was :
>
>In SWEC when we link CDOs to events you get three radio buttons.
>On Create             On Change             On Delete.
>What you are suggesting will work for the On Change radio button, i.e
>when
>existing sales orders are changed. What I trying to do, was when sales
>orders are created, that time if anyone puts a block on the sales
order,
>
>VBAK-LIFSK = 3, I wanted to trigger the event of the business object.
>It was not working, maybe CDOs work only when existing documents are
>changed. I have achieved a work around using an Output Type and a
>condition
>record for the VBAK-LIFSK = '03' value.
>Thanks for taking the time for replying.
>
>
>Regards,
>Vijay
>
> >From: Ramanan Srinivasan <ramanansr at gmail.com>
> >Reply-To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
> >To: "SAP Workflow Users' Group" <sap-wug at mit.edu>
> >Subject: Re: doubt regd. change document objects
> >Date: Fri, 7 Oct 2005 16:53:28 -0400
> >
> >Sorry Vijay, about triggering event
> >  Here is the right one
> >Event linkage
> >Object type : ZBUS2032
> >Event : DELVERYBLOCKCHANGED
> >
> >  On 10/7/05, Ramanan Srinivasan <ramanansr at gmail.com> wrote:
> > >
> > > Vijay,
> > >  1 .Create custom sub type for BUS2032 as ZBUS2032...
> > > 2. Create a new event for example "DELIVERYBLOCKCHANGED" in the
sub
>type
> > > as ABAP dictionary type using table VBAK field LIFSK using txn
type
> > > 3. Implement and release object type ZBUS2032
> > > 4. Implement and release object type component ---( new method )
to
> > > release and im implemented and released
> > > 5. assign deligation to super type
> > > 6. Now your new method will be visible to BUS2032.
> > > 7. Use start value restriction to 3 to 3 for the field LIFSK
> > >  WF triggering event is "SalesOrder.CHANGED"
> > > event in super type BUS2032.
> > >  now when any sales order gets a value from anything to 3 in the
>field
> > > LIFSK , WF will be started.
> > >  Enjoy
> > > Srinivasan
> > > ramanansr at gmail.com
> > >  On 10/7/05, Workflow99 at aol.com <Workflow99 at aol.com> wrote:
> > > >
> > > >  Vijay,
> > > >  You cannot look for a field change on a CREATE change doc. If
>your
> > > > intention is to start a workflow if VBAK-LIFSK = 3 on CREATE,
you
>can
> >do it
> > > > by using start conditions with the CREATE event as the trigger
for
>the
> >WF
> > > >   Regards,
> > > > Ramki Maley
> > > > Workflow Developer, USCBP.
> > > > 248-613-1287 (C)
> > > >     In a message dated 10/7/2005 12:13:35 PM Eastern Standard
>Time,
> > > > vijay_d15 at hotmail.com writes:
> > > >
> > > > Hi,
> > > >
> > > > I tried linking change doc. object VERKBELEG to a workflow on
>CREATE,
> > > > with
> > > > field changes
> > > > VBAK-LIFSK from * to 03. It does not trigger the event that I
have
> > > > linked.
> > > > Any pointers on why it is happening. Or is it that we have to
link
> > > > Change
> > > > doc. objects only on CHANGE to a business object event...Thanks
in
> > > > advance
> > > > for your help.
> > > >
> > > >
> > > > Regards,
> > > > Vijay
> > > >
> > > >
> > > > _______________________________________________
> > > > SAP-WUG mailing list
> > > > SAP-WUG at mit.edu
> > > > http://mailman.mit.edu/mailman/listinfo/sap-wug
> > > >
> > > >
> > > > _______________________________________________
> > > > SAP-WUG mailing list
> > > > SAP-WUG at mit.edu
> > > > http://mailman.mit.edu/mailman/listinfo/sap-wug
> > > >
> > > >
> > > >
> > >
>
>
> >_______________________________________________
> >SAP-WUG mailing list
> >SAP-WUG at mit.edu
> >http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>
>_______________________________________________
>SAP-WUG mailing list
>SAP-WUG at mit.edu
>http://mailman.mit.edu/mailman/listinfo/sap-wug
>
>_______________________________________________
>SAP-WUG mailing list
>SAP-WUG at mit.edu
>http://mailman.mit.edu/mailman/listinfo/sap-wug

_______________________________________________
SAP-WUG mailing list
SAP-WUG at mit.edu
http://mailman.mit.edu/mailman/listinfo/sap-wug