Binding table parameter from method to multi-line container e lement in task
Kouw, FA - SPLXE
fa.kouw at td.klm.com
Thu Jul 8 07:47:26 EDT 2004
Thanks Swami, I'll try that!
Regards,
Fred
Hotmail wrote:
> Fred,
>
> When you select 'Binding Definition' between task and method, you would see
> those 2 options if you happen to bind an internal table. First option will
> clear and refresh the internal table before the binding occurs every time.
> The second option just adds the entry no matter what is in the internal
> table. By default the option is 2. So select the binding definition again
> and choose the first option instead.
>
> Hope this helps.
>
> Swami Bala
>
> ----- Original Message -----
>> From: "Kouw, FA - SPLXE" <fa.kouw at td.klm.com>
> To: <SAP-WUG at MITVMA.MIT.EDU>
> Sent: Tuesday, July 06, 2004 1:23 AM
> Subject: Re: Binding table parameter from method to multi-line container e
> lement in task
>
> > Hi Jocelyn,
> >
> > I'm not familiar with these options (always used the default settings).
> We're on 4.6C.
> >
> > How can I see that I used 'the default setting of append' and how can I
> 'change it in the binding definition'? I tried to
> > find it, but no luck so far...
> >
> > To me it seems that the problem was located in the binding from the method
> to the task and not in the binding from the
> > task to the workflow (see previous message). Maybe I'm wrong!
> >
> > The only clue I have is what I already mentioned in my previous message,
> is that the change you refer to:
> >
> > " What is also not clear to me is why the following expressions are shown
> > when defining the binding between the method parameter to the task
> > container element (one extra for the element 'NonClearableItems'):
> >
> > ================
> > Expression
> >
> > - Container
> >
> > + NonClearableItems Invoice Items
> > NonClearableItems " add instead of change
> > ================ "
> >
> > Hope you or someone else can help me out!
> >
> > Regards,
> >
> > Fredl
> >
> > "Dart, Jocelyn" wrote:
> >
> > > Fred,
> > > Sounds like you let the assignment type in the binding between workflow
> and task go to the default setting of append.
> > > You should be able to change it in the binding definition.
> > > Jocelyn
> > >
> > > -----Original Message-----
> > > From: SAP Workflow [mailto:Owner-SAP-WUG at MITVMA.MIT.EDU] On Behalf Of
> Kouw, FA - SPLXE
> > > Sent: Tuesday,6 July 2004 12:25 AM
> > > To: SAP-WUG at MITVMA.MIT.EDU
> > > Subject: Binding table parameter from method to multi-line container
> element in task
> > >
> > > Hi,
> > >
> > > I have a problem binding a parameter from a method to a container
> > > element in a task. The value in the task container is not overwritten by
> > > the value that is set in the method parameter. When testing the method
> > > on it's own the results are OK (value method parameter empty). Can
> > > someone give me a clue what I'm doing wrong?
> > >
> > > A value is given to the method parameter (table) and exported to the
> > > task container element (multi-line element defined as ABAP dictionary
> > > reference table RSEG_BUZEI) like this:
> > >
> > > ================
> > > BEGIN_METHOD Z_INITIALIZENONCLEARABLEITEMS CHANGING CONTAINER.
> > >
> > > DATA: tab_nonclearable_items LIKE rseg_buzei OCCURS 0.
> > >
> > > swc_get_table container 'NonClearableItems' tab_nonclearable_items.
> > > REFRESH tab_nonclearable_items.
> > > swc_set_table container 'NonClearableItems' tab_nonclearable_items.
> > >
> > > END_METHOD.
> > > ================
> > >
> > > The problem I experience is shown in the workflow trace:
> > >
> > > ================
> > > Import binding
> > >
> > > Content of target container
> > >
> > > Name Type Value
> > >
> > > NONCLEARABLEITEMS(001) C006 000001
> > > _WI_OBJECT_ID o090 D11CLNT210BUS2081 5105602051200
> > > _WORKITEM o090 D11CLNT210BATCHITEM 000000690207
> > >
> > > Content of source container
> > >
> > > Name Type Value
> > >
> > > NONCLEARABLEITEMS(001) 000
> > > <--------------------------------------- This looks strange!!!!!
> > > _WI_OBJECT_ID o090 D11CLNT210BUS2081 5105602051200
> > >
> > > Error messages - none
> > >
> > > NONCLEARABLEITEMS ===> &NONCLEARABLEITEMS&
> > > ================
> > >
> > > What is also not clear to me is why the following expressions are shown
> > > when defining the binding between the method parameter to the task
> > > container element (one extra for the element 'NonClearableItems'):
> > >
> > > ================
> > > Expression
> > >
> > > - Container
> > >
> > > + NonClearableItems Invoice Items
> > > NonClearableItems " add instead of change
> > > ================
> > >
> > > Hope someone can help me out (I also tried to set the container element
> > > to an empty value using a container operation, but that also didn't work
> > > (error: "Operation '=' between data type 'u' and 'u' not allowed", see
> > > previous posting from Shefali Hennekam).
> > >
> > > Regards,
> > >
> > > Fred
> > >
> > > Please visit http://www.klm-em.com for information about KLM Engineering
> & Maintenance products and services.
> > >
> > > **********************************************************************
> > > This e-mail and any attachment may contain confidential and privileged
> > > material intended for the addressee only. If you are not the addressee,
> you
> > > are notified that no part of the e-mail or any attachment may be
> disclosed,
> > > copied or distributed, and that any other action related to this e-mail
> or
> > > attachment is strictly prohibited, and may be unlawful. If you have
> received
> > > this e-mail by error, please notify the sender immediately by return
> e-mail,
> > > and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM),
> its
> > > subsidiaries and/or its employees shall not be liable for the incorrect
> or
> > > incomplete transmission of this e-mail or any attachments, nor
> responsible
> > > for any delay in receipt.
> > > **********************************************************************
> > >
> > >
> ____________________________________________________________________________
> _________________
> > > This outbound message from KPN has been checked for all known viruses by
> KPN IV-Scan, powered by MessageLabs.
> > > For further information visit: http://www.veiliginternet.nl
> > >
> ____________________________________________________________________________
> _________________
> > >
> > >
> ____________________________________________________________________________
> _____________
> > > This inbound message from KPN has been checked for all known viruses by
> KPN IV-Scan, powered by MessageLabs.
> > > For further information visit: http://www.veiliginternet.nl
> > >
> ____________________________________________________________________________
> _________________
> >
> >
> > Please visit http://www.klm-em.com for information about KLM Engineering &
> Maintenance products and services.
> >
> > **********************************************************************
> > This e-mail and any attachment may contain confidential and privileged
> > material intended for the addressee only. If you are not the addressee,
> you
> > are notified that no part of the e-mail or any attachment may be
> disclosed,
> > copied or distributed, and that any other action related to this e-mail or
> > attachment is strictly prohibited, and may be unlawful. If you have
> received
> > this e-mail by error, please notify the sender immediately by return
> e-mail,
> > and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
> > subsidiaries and/or its employees shall not be liable for the incorrect or
> > incomplete transmission of this e-mail or any attachments, nor responsible
> > for any delay in receipt.
> > **********************************************************************
> >
> >
> ____________________________________________________________________________
> _________________
> > This outbound message from KPN has been checked for all known viruses by
> KPN IV-Scan, powered by MessageLabs.
> > For further information visit: http://www.veiliginternet.nl
> >
> ____________________________________________________________________________
> _________________
> >
>
> _________________________________________________________________________________________
> This inbound message from KPN has been checked for all known viruses by KPN IV-Scan, powered by MessageLabs.
> For further information visit: http://www.veiliginternet.nl
> _____________________________________________________________________________________________
Please visit http://www.klm-em.com for information about KLM Engineering & Maintenance products and services.
**********************************************************************
This e-mail and any attachment may contain confidential and privileged
material intended for the addressee only. If you are not the addressee, you
are notified that no part of the e-mail or any attachment may be disclosed,
copied or distributed, and that any other action related to this e-mail or
attachment is strictly prohibited, and may be unlawful. If you have received
this e-mail by error, please notify the sender immediately by return e-mail,
and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
subsidiaries and/or its employees shall not be liable for the incorrect or
incomplete transmission of this e-mail or any attachments, nor responsible
for any delay in receipt.
**********************************************************************
_____________________________________________________________________________________________
This outbound message from KPN has been checked for all known viruses by KPN IV-Scan, powered by MessageLabs.
For further information visit: http://www.veiliginternet.nl
_____________________________________________________________________________________________
More information about the SAP-WUG
mailing list