Forward SAP mail

Sasmita, Hendri Hendri.Sasmita at amersham.com
Fri Mar 7 04:12:03 EST 2003


Hi Jocelyn,
 
I am using RSWUWFMLEC to forward work item to email. I have set the
autoforwarding attribute for everyone but the SAPMail doesn't get =
forwarded.
You said that EBP workflows are set up to send any mails directly to =
the
user's email address but It doesn't happen in my EBP system. Did I miss
something to be configured?
 
Thanks
 
Regards
 
Hendri
 
-----Original Message-----
From: Dart, Jocelyn [mailto:jocelyn.dart at sap.com]
Sent: Thursday, March 06, 2003 22:03
To: SAP-WUG at MITVMA.MIT.EDU
Subject: Re: Forward SAP mail
 
 
Hi Hendri,=20
You really should be using RSWUWFMLEC - this is already set up to use =
the
user master
address and the forwarding attribute in the org plan.=20
 
You really should NOT be using SO36 or RSWUWFML in EBP 3.5 or any other =
EBP
release
for that matter. They are the wrong tools for the job - that's why
RSWUWFMLEC=20
was created.
 
Plus all the standard EBP workflows are set up to send any mails (as =
opposed
to workitems) directly to the user's email address anyway.=20
 
If you want to set a common pattern to the email address for everyone =
then=20
use transaction SO16.=20
 
If you want to set the autoforwarding attribute for everyone - you just =
set
it
at the top of the org plan and it will be inherited by all.=20
 
Regards,
        Jocelyn Dart=20
Consultant (SRM, EBP, Workflow)
and co-author of the book
"Practical Workflow for SAP"=20
SAP Australia
email: jocelyn.dart at sap.com=20
phone: +61 412 390 267
fax:   +61 2 9935 4880
 
 
 
 
-----Original Message-----
From: Schmidinger, Heinz (Unaxis IT BZ)
[mailto:heinz.schmidinger at unaxis.com]
Sent: Thursday, 6 March 2003 10:57 PM
To: SAP-WUG at MITVMA.MIT.EDU
Subject: AW: Forward SAP mail
 
 
Hi Hendri,
 
I'm not sure, but if I recall right, I have seen somewhere a Tx or =
report to
set SMTP-Adresses for all 'if a syntax-rule is possible ... ' or so. =
But I
cann't remember where it was. Have a look to OSS;
 
Wait a moment, I have found it:
 
Note 320443, 100232, 63480 - maybe this helps but this is it:
 
SAP-Doku Administration SAP-Office: Report RSSOEMAI (Alias-Namen f=FCr
Internet bekanntmachen).
I don't knw which Release or so  because I have found only an old =
Print-Out
of this chapter in german.
 
Regards
 
Heinz
 
-----Urspr=FCngliche Nachricht-----
Von: Sasmita, Hendri [mailto:Hendri.Sasmita at amersham.com]
Gesendet am: Donnerstag, 6. M=E4rz 2003 12:15
An: SAP-WUG at MITVMA.MIT.EDU
Betreff: Re: Forward SAP mail
 
Hi Heinz,
 
After setting the email address and set the communication type to =
E-Mail,
the SAPMail gets forwarded. Actually, is it necessary to maintain this
communication type in SU01 or SU3?
If it is necessary then the next question : Is there any transaction =
that
can maintain this field for all user in one shot or we need to maintain =
this
field user by user using SU01.
 
Thanks
 
Regards
 
Hendri
 
-----Original Message-----
From: Schmidinger, Heinz (Unaxis IT BZ)
[mailto:heinz.schmidinger at unaxis.com]
Sent: Thursday, March 06, 2003 10:22
To: SAP-WUG at MITVMA.MIT.EDU
Subject: AW: Forward SAP mail
 
 
Hi Hendri,
 
some Month ago I was in discussion via OSS with SAP concerning a =
similar
approach.
 
The recommandation of SAP is to use 'Mail-Verbund' defined in Tx SO16.
 
So I'm not using EBP , I'm not firm with their specialities, but I have
found Note 552168 for EBP.
 
Maybe it helps.
 
Regards
 
Heinz
 
-----Urspr=FCngliche Nachricht-----
Von: Sasmita, Hendri [mailto:Hendri.Sasmita at amersham.com]
Gesendet am: Donnerstag, 6. M=E4rz 2003 10:01
An: SAP-WUG at MITVMA.MIT.EDU
Betreff: Re: Forward SAP mail
 
Hi Heinz, Phil and Sharon
 
Thanks for your reply.
After setting setting the auto forwarding through transaction SO13 or =
SO36,
the SAPMail is forwarded automatically. But, if I set the email address =
in
user master data (SU01) only (not set in the auto forwading through =
SO13 or
SO36) the SAPMail doesn't get forwarded to the email. I am using EBP =
3.5 and
we prefer to set the email address in user master data (as the user is
likely to do that in the EBP screen -> web) and set attribute =
FORWARD_WI
centrally by using transaction PPOMA_BBP.
What is the way to make this happen?
 
Thank you very much
 
Regards
 
Hendri
 
-----Original Message-----
From: Schmidinger, Heinz (Unaxis IT BZ)
[mailto:heinz.schmidinger at unaxis.com]
Sent: Wednesday, March 05, 2003 12:36
To: SAP-WUG at MITVMA.MIT.EDU
Subject: AW: Forward SAP mail
 
 
Hi Hendri,
 
if you have installed SAPConnect (and this is the basis for RSWUWFML)
SAPMail is forwarded to if automatic forwarding is on userbased.
 
regards
 
Heinz
 
-----Urspr=FCngliche Nachricht-----
Von: Sasmita, Hendri [mailto:Hendri.Sasmita at amersham.com]
Gesendet am: Mittwoch, 5. M=E4rz 2003 13:08
An: SAP-WUG at MITVMA.MIT.EDU
Betreff: Forward SAP mail
 
Hi all,
 
I understand that program RSWUWFML and RSWUWFMLEC only forward work =
item to
email.
I have a requirement to forward SAP mail notification to email.
Is there any program that can do that job?
 
Thanks
 
Regards
 
Hendri
 
 
"This transmission is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional or other privilege. If you are not the intended addressee, =
you
must not disclose, copy or take any action in reliance on this =
transmission.
If you have received this transmission in error, please notify us as =
soon as
possible."
 
 
"This transmission is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional or other privilege. If you are not the intended addressee, =
you
must not disclose, copy or take any action in reliance on this =
transmission.
If you have received this transmission in error, please notify us as =
soon as
possible."
 
 
"This transmission is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional or other privilege. If you are not the intended addressee, =
you
must not disclose, copy or take any action in reliance on this =
transmission.
If you have received this transmission in error, please notify us as =
soon as
possible."
 
 
"This transmission is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional or other privilege. If you are not the intended addressee, =
you
must not disclose, copy or take any action in reliance on this =
transmission.
If you have received this transmission in error, please notify us as =
soon as
possible."
 


More information about the SAP-WUG mailing list