[Cidrz] Conference Call at Dimagi Office at 4:30 PM
Andrés Monroy-Hernández
andresmh at media.mit.edu
Mon Mar 17 12:23:41 EDT 2008
I have a class from 3 to 4.30 on the other side of campus. I'll call
in as I walk over there...
2008/3/17, Daniel Myung <dmyung at dimagi.com>:
> correct, 4:30pm Dimagi Office
> 400 One Kendall Square.
>
> So walk up broadway (go through the kendall marriott) and pass by Draper
> Labs. You want to go underneath the skywalk and take a right at into One
> Kendall as if you were going to the Kendall Cinema.
>
> We are building 400, 4th floor. call me if you're lost 617 645 3236
>
> http://maps.google.com/maps?f=q&hl=en&geocode=&q=400+one+kendall+square,+cambridge,+ma&sll=37.0625,-95.677068&sspn=49.490703,85.078125&ie=UTF8&z=16
>
>
> On 3/17/08, Daniel Myers <dsmyers at mit.edu> wrote:
> > I've been following the back-and-forth re: the call--so it's on for
> > 4:30 today at the dimagi office? Can someone give me the address?
> >
> > Thanks,
> > Daniel
> >
> > On Mon, Mar 17, 2008 at 12:02 PM, Andrés Monroy-Hernández
> >
> > <andresmh at media.mit.edu> wrote:
> > > OK. I'll take care of the presentation and I'll call to that number at
> > > 4.30. So we are NOT meeting at 1.30 at Stata?
> > >
> > > 2008/3/16, Leo Anthony Celi <leoanthonyceli at yahoo.com>:
> > >
> > >
> > > > Hi,
> > > > My flight is at 6:30 PM so I was planning to get to the
> airport by
> > > > 4:30 PM. Even if I get to the airport by 4 PM, I'm probably queueing
> up for
> > > > about an hour given it's an international flight.
> > > > Go ahead without me. My main questions are:
> > > > 1. How important is real-time decision support functionality to
> them? If
> > > > they think it is key, who will provide the on-call service? Doctors
> in
> > > > Lusaka? Doctors in the US? How will this be possible given the time
> > > > difference between Zambia and the US?
> > > > 2. How do the doctors on-call want to be notified of the need for
> decision
> > > > support? The workflow needs to be granularized fully. Will the
> doctor
> > > > on-call just want to ring the nurse who sent the image? A use case
> diagram
> > > > will be helpful. How do we capture and document the
> decision/information
> > > > flow? This is improtant for QA.
> > > > 2. What other functionalities do they want? How do they want to
> carry on
> > > > the weekly image reviews that they have now? Are the doctors
> planning to
> > > > continue travelling to each area of the country as the programme is
> rolled
> > > > out? Or do they envision a tele-medicine type image reviews?
> > > > 3. How are they envisioning implementation? I presume they'll pilot
> the
> > > > real-time functionality in a small area? I've presumed from my
> previous
> > > > question that it will be a roll-out implementation across the
> country.
> > > > 4. What other QA processes should we put in place for the pilot
> apart from
> > > > a record of the exchange and transfer of information? for the actual
> > > > implementation?
> > > > 5. We should also come up with both process and outcome metrics that
> we
> > > > will track as we implement it from one area to another. These are
> important
> > > > if CIDRZ really wants to become established as the center of training
> in
> > > > cervical cancer screening. This is my area of expertise and would be
> happy
> > > > to work with the CIDRZ folks.
> > > > 6. Are they going to use the same nurses as we roll out from one
> area of
> > > > the country to another? If not, how many nurses need to be trained?
> I
> > > > presume the core group of nurses will be responsible for training the
> nurses
> > > > in other areas of the country? Have they given this a thought?
> > > > 7. What sort of operational and technical risks are involved in the
> project?
> > > > How can we minimize these risks? Do we have contingency plans for
> those
> > > > that are most likely to be encountered?
> > > > Andres, I leave the oral presentation in your hands. Daniel
> Myung,
> > > > Andres will be presenting on Tuesday in case you haven't been
> informed yet.
> > > > Andres, please post a blog regarding the conference call and the
> > > > comments/suggestions of the instructors and the rest of the class.
> I'll
> > > > make it up when I get back.
> > > > Cheers,
> > > > Leo
> > > >
> > > > Daniel Myung <dmyung at dimagi.com> wrote:
> > > > hey leo,
> > > >
> > > > can you call in from the terminal at 4:30pm? figure since you'll be
> at the
> > > > airport by 4, the cidrz guys a little tough to track down, so i want
> to
> > > > stick to the singular 4:30pm call as we rescheduled earlier.
> > > >
> > > >
> > > > call in information:
> > > >
> > > > (906) 481-2000
> > > > call in number 684882
> > > >
> > > > dan
> > > >
> > > >
> > > >
> > > > On 3/13/08, Leo Anthony Celi <leoanthonyceli at yahoo.com> wrote:
> > > > >
> > > > > My flight leaves at 6:30 PM. I'm taking the T to the airport so I
> have to
> > > > leave by 4 PM at the latest. Perhaps we can have 2 separate
> conference
> > > > calls, one general (for the doctors and nurses) and one technical?
> Will the
> > > > doctors and nurses be able to answer the more technical questions
> from
> > > > Andres? I can do the general conference call at 2 PM and Andres can
> > > > conference call with the more technical people at 4:30 PM. What do
> you guys
> > > > think? Would 10:30 PM (4:30 PM Boston time) be too late for the
> Lusaka
> > > > folks?
> > > > > ~
> > > > >
> > > > >
> > > > > Daniel Myung <dmyung at dimagi.com> wrote:
> > > > > i'll try my darndest to see if we can move it. leo, when's your
> travel?
> > > > is that 430pm time ok?
> > > > >
> > > > >
> > > > > On 3/13/08, Andrés Monroy-Hernández <andresmh at media.mit.edu> wrote:
> > > > > > oh actually, i just realized that there is going to be an extra
> > > > > > session on j2me programming for the class at the same time...
> could
> > > > > > we move it to after 4.30pm?
> > > > > >
> > > > > > 2008/3/13, Andrés Monroy-Hernández <andresmh at media.mit.edu>:
> > > > > >
> > > > > > > Confirmed.
> > > > > > >
> > > > > > > 2008/3/13, Leo Anthony Celi <leoanthonyceli at yahoo.com>:
> > > > > > >
> > > > > > > > Sounds good.
> > > > > > > >
> > > > > > > > Daniel Myung <dmyung at dimagi.com> wrote:
> > > > > > > > i got off the phone with cidrz earlier. given the schedule
> it
> > > > looks
> > > > > > > > impossible for them to come up to boston, but i arranged
> during our
> > > > meeting
> > > > > > > > monday to have a conference call w/ them. so why not for
> this
> > > > monday we
> > > > > > > > meet at dimagi offices at One Kendall by flat top johnny's?
> 2pm
> > > > same time.
> > > > > > > >
> > > > > > > > Dan
> > > > > > > >
> > > > > > > >
> > > > > > > > On 3/13/08, Daniel Myung <dmyung at dimagi.com> wrote:
> > > > > > > > > hey guys,
> > > > > > > > >
> > > > > > > > > i've setup a VM with hopefully all the LAMP you'll need.
> > > > > > > > >
> > > > > > > > > the specs are here:
> > > > > > > > >
> http://www.vmware.com/appliances/directory/496
> > > > > > > > >
> > > > > > > > > root password is nokia
> > > > > > > > >
> > > > > > > > > the web url for just port 80 access is:
> > > > > > > > > ict4dev.dimagi.com
> > > > > > > > >
> > > > > > > > > the ssh login is found at:
> > > > > > > > > 38.97.79.152
> > > > > > > > >
> > > > > > > > > lemme know if you need me to run/load anything off of it.
> > > > > > > > >
> > > > > > > > > Dan
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Daniel Myung
> > > > > > > > Senior Engineer
> > > > > > > > Dimagi, Inc | One Kendall Square | Bldg. 400, 4th Floor
> |
> > > > Cambridge,
> > > > > > > > MA 02139
> > > > > > > > work: (617) 621 8595 | cell: (617) 645 3236
> > > > > > > > http://www.dimagi.com/
> > > > > > > >
> _______________________________________________
> > > > > > > > Cidrz mailing list
> > > > > > > > Cidrz at mit.edu
> > > > > > > >
> http://mailman.mit.edu/mailman/listinfo/cidrz
> > > > > > > >
> > > > > > > >
> > > > > > > >
> _______________________________________________
> > > > > > > > Cidrz mailing list
> > > > > > > > Cidrz at mit.edu
> > > > > > > >
> http://mailman.mit.edu/mailman/listinfo/cidrz
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > > > Andrés
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Andrés
> > > > > >
> > > > > > _______________________________________________
> > > > > > Cidrz mailing list
> > > > > > Cidrz at mit.edu
> > > > > > http://mailman.mit.edu/mailman/listinfo/cidrz
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Daniel Myung
> > > > > Senior Engineer
> > > > > Dimagi, Inc | One Kendall Square | Bldg. 400, 4th Floor |
> Cambridge,
> > > > MA 02139
> > > > > work: (617) 621 8595 | cell: (617) 645 3236
> > > > > http://www.dimagi.com/
> > > > _______________________________________________
> > > > > Cidrz mailing list
> > > > > Cidrz at mit.edu
> > > > > http://mailman.mit.edu/mailman/listinfo/cidrz
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Cidrz mailing list
> > > > > Cidrz at mit.edu
> > > > > http://mailman.mit.edu/mailman/listinfo/cidrz
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Daniel Myung
> > > > Senior Engineer
> > > > Dimagi, Inc | One Kendall Square | Bldg. 400, 4th Floor |
> Cambridge,
> > > > MA 02139
> > > > work: (617) 621 8595 | cell: (617) 645 3236
> > > > http://www.dimagi.com/
> > > > _______________________________________________
> > > > Cidrz mailing list
> > > > Cidrz at mit.edu
> > > > http://mailman.mit.edu/mailman/listinfo/cidrz
> > > >
> > > >
> > > > _______________________________________________
> > > > Cidrz mailing list
> > > > Cidrz at mit.edu
> > > > http://mailman.mit.edu/mailman/listinfo/cidrz
> > > >
> > > >
> > >
> > >
> > > --
> > > Andrés
> > >
> > > _______________________________________________
> > > Cidrz mailing list
> > > Cidrz at mit.edu
> > > http://mailman.mit.edu/mailman/listinfo/cidrz
> > >
> >
> > _______________________________________________
> > Cidrz mailing list
> > Cidrz at mit.edu
> > http://mailman.mit.edu/mailman/listinfo/cidrz
> >
>
>
>
> --
> Daniel Myung
> Senior Engineer
> Dimagi, Inc | One Kendall Square | Bldg. 400, 4th Floor | Cambridge,
> MA 02139
> work: (617) 621 8595 | cell: (617) 645 3236
> http://www.dimagi.com/
> _______________________________________________
> Cidrz mailing list
> Cidrz at mit.edu
> http://mailman.mit.edu/mailman/listinfo/cidrz
>
>
--
Andrés
More information about the Cidrz
mailing list