<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Verdana
}
--></style>
</head>
<body class='hmmessage'>
<br>Hey Florin,<br><br>I've done what you have suggested and it worked for both cases (Reading & writing). Thanks a lot for the great detailed explanation. You did mention to be careful for endless loops when using get_property with database attributes, how would they occur and how to avoid them?<br><br>Thanks a lot again for your help.<br>Ali <br><br><br><br><br>> From: sap-wug-request@mit.edu<br>> Subject: SAP-WUG Digest, Vol 64, Issue 7<br>> To: sap-wug@mit.edu<br>> Date: Thu, 4 Mar 2010 09:36:34 -0500<br>> <br>> Send SAP-WUG mailing list submissions to<br>>         sap-wug@mit.edu<br>> <br>> To subscribe or unsubscribe via the World Wide Web, visit<br>>         http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> or, via email, send a message with subject or body 'help' to<br>>         sap-wug-request@mit.edu<br>> <br>> You can reach the person managing the list at<br>>         sap-wug-owner@mit.edu<br>> <br>> When replying, please edit your Subject line so it is more specific<br>> than "Re: Contents of SAP-WUG digest..."<br>> <br>> <br>> Today's Topics:<br>> <br>> 1. RE: SAP-WUG Digest, Vol 64, Issue 6 (John Howarth)<br>> 2. RE: Incoming Emails and SO28 (Mike Pokraka)<br>> 3. Re: Reading and Writing Attributes of a Business Object<br>> (Florin Wach)<br>> 4. RE: Resolving responsibility rule (Mike Pokraka)<br>> 5. Re: SAP-WUG Digest, Vol 64, Issue 6 (Neil Gardiner)<br>> <br>> <br>> ----------------------------------------------------------------------<br>> <br>> Message: 1<br>> Date: Thu, 4 Mar 2010 10:07:21 -0000<br>> From: "John Howarth" <John.Howarth@eads.com><br>> Subject: RE: SAP-WUG Digest, Vol 64, Issue 6<br>> To: <sap-wug@mit.edu><br>> Message-ID:<br>>         <ACF26F10C0FF46468AF0FCD5E93EE93ACE9FF9@suknpt8104.cogent-dsn.local><br>> Content-Type: text/plain;        charset="us-ascii"<br>> <br>> Hi<br>> <br>> On a 4.6C system. I am trying to trigger a Goods Receipt event from BADI<br>> (rather than a FM) I cant use the <CNTN01> include because of 'LIKE'<br>> statements in the code.<br>> Has anyone got example of the code I can use . <br>> <br>> Kind Regards,<br>> <br>> John Howarth<br>> <br>> SAP PLM Technical Support<br>> <br>> <br>> <br>> EADS Defence and Security Systems<br>> <br>> ( Contact: 01633 715315<br>> <br>> * Email: john.howarth@eads.com<br>> <br>> <br>> <br>> -----Original Message-----<br>> From: sap-wug-bounces@mit.edu [mailto:sap-wug-bounces@mit.edu] On Behalf<br>> Of sap-wug-request@mit.edu<br>> Sent: 04 March 2010 08:50<br>> To: sap-wug@mit.edu<br>> Subject: SAP-WUG Digest, Vol 64, Issue 6<br>> <br>> Send SAP-WUG mailing list submissions to<br>>         sap-wug@mit.edu<br>> <br>> To subscribe or unsubscribe via the World Wide Web, visit<br>>         http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> or, via email, send a message with subject or body 'help' to<br>>         sap-wug-request@mit.edu<br>> <br>> You can reach the person managing the list at<br>>         sap-wug-owner@mit.edu<br>> <br>> When replying, please edit your Subject line so it is more specific<br>> than "Re: Contents of SAP-WUG digest..."<br>> <br>> <br>> Today's Topics:<br>> <br>> 1. Problem submitting ML85 report (Shai Eyal)<br>> 2. User. Created / User Cloned/Changed Event is not triggered<br>> (Kesav P)<br>> 3. User. Created / User Cloned/Changed Event is not triggered<br>> (Karl Nietz)<br>> 4. Reading and Writing Attributes of a Business Object (Ali Husain)<br>> <br>> <br>> ----------------------------------------------------------------------<br>> <br>> Message: 1<br>> Date: Wed, 3 Mar 2010 11:02:34 -0800 (PST)<br>> From: Shai Eyal <shai.eyal@yahoo.com><br>> Subject: Problem submitting ML85 report<br>> To: sap-wug <sap-wug@mit.edu><br>> Message-ID: <277958.74287.qm@web59105.mail.re1.yahoo.com><br>> Content-Type: text/plain; charset="iso-8859-1"<br>> <br>> Hello experts,<br>> <br>> I have this strange issue. I've build workflow for service entry sheet<br>> release and it works OK.?I'm trying to add "collective release"<br>> functionality by navigating user to ML85. If I use "call transaction<br>> ML85", it works fine. But since SAP standard?program does not GET MEMORY<br>> ID LBL (service entry sheet number) then I can't work this way.<br>> Therefore I changed my source to?"submit?RMSRVF00 using<br>> selection...".?Now it gets weird - if I place my source in SE38 dummy<br>> program, it works great.?But when it is executed via SWO1, it?result a<br>> list w\o buttons to release.<br>> <br>> Any idea?<br>> Thanks in advance,<br>> ?<br>> Regards,<br>> Shai Eyal<br>> SAP Logistics senior consultant<br>> SAP Workflow & BPM specialist<br>> http://www.linkedin.com/in/shaieyal<br>> Mobile: 972-52-5816633<br>> <br>> <br>> New Email names for you! <br>> Get the Email name you&#39;ve always wanted on the new @ymail and<br>> @rocketmail. <br>> Hurry before someone else does!<br>> http://mail.promotions.yahoo.com/newdomains/aa/<br>> -------------- next part --------------<br>> An HTML attachment was scrubbed...<br>> URL:<br>> http://mailman.mit.edu/pipermail/sap-wug/attachments/20100303/21063617/a<br>> ttachment-0001.htm<br>> <br>> ------------------------------<br>> <br>> Message: 2<br>> Date: Wed, 3 Mar 2010 18:54:26 -0800 (PST)<br>> From: Kesav P <pachallak@yahoo.com><br>> Subject: User. Created / User Cloned/Changed Event is not triggered<br>> To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> Message-ID: <645787.5356.qm@web56403.mail.re3.yahoo.com><br>> Content-Type: text/plain; charset="iso-8859-1"<br>> <br>> Hi,<br>> <br>> <br>> We are on ECC 6.0, Non-CUA environment and HR module?is not being used.<br>> <br>> We are trying to trigger a workflow When a SAP User is created using<br>> SU01 or changed user data using?su3.?<br>> <br>> The problem is that the User.Created or User.cloned/changed events are<br>> not?being?triggered?. <br>> I have verified event log with SWEL?and no events are?appearing.<br>> <br>> I would like to know is there any specific setup required?to generate<br>> these above events.?<br>> Appreciate your time.<br>> <br>> Thanks<br>> Kesav<br>> <br>> <br>> <br>> -------------- next part --------------<br>> An HTML attachment was scrubbed...<br>> URL:<br>> http://mailman.mit.edu/pipermail/sap-wug/attachments/20100303/5dbfa82a/a<br>> ttachment-0001.htm<br>> <br>> ------------------------------<br>> <br>> Message: 3<br>> Date: Thu, 4 Mar 2010 13:30:57 +1000<br>> From: Karl Nietz <knietz@csc.com.au><br>> Subject: User. Created / User Cloned/Changed Event is not triggered<br>> To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> Message-ID:<br>>         <br>> <OFD30C83B0.3CF25DD3-ONCA2576DC.00127D51-CA2576DC.001350C0@csc.com><br>> Content-Type: text/plain; charset="us-ascii"<br>> <br>> Kesav,<br>> <br>> I don't think the SU01/SU03 transactions publish events internally. You<br>> <br>> could see if a change document is published and then configure events in<br>> <br>> transaction SWEC, but it is again possible that change docs are also not<br>> <br>> created. If not, examine the underlying tables (USR01 etc) to see if <br>> change document creation is activated and adjust if possible and try <br>> again. If this does not work then you could establish if an exit exists<br>> <br>> in the code and if so publish your own events. But I must admit I have <br>> distant memories of once trying this and getting nohwere. See what the <br>> other contributors suggest too.<br>> <br>> <br>> Karl Nietz<br>> <br>> <br>> <br>> <br>> From:<br>> Kesav P <pachallak@yahoo.com><br>> To:<br>> "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> Date:<br>> 04/03/2010 02:00 PM<br>> Subject:<br>> User. Created / User Cloned/Changed Event is not triggered<br>> <br>> <br>> <br>> Hi,<br>> <br>> We are on ECC 6.0, Non-CUA environment and HR module is not being used.<br>> <br>> We are trying to trigger a workflow When a SAP User is created using<br>> SU01 <br>> or changed user data using su3. <br>> <br>> The problem is that the User.Created or User.cloned/changed events are<br>> not <br>> being triggered . <br>> I have verified event log with SWEL and no events are appearing.<br>> <br>> I would like to know is there any specific setup required to generate <br>> these above events. <br>> Appreciate your time.<br>> <br>> Thanks<br>> Kesav<br>> <br>> <br>> _______________________________________________<br>> SAP-WUG mailing list<br>> SAP-WUG@mit.edu<br>> http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> <br>> <br>> -------------- next part --------------<br>> An HTML attachment was scrubbed...<br>> URL:<br>> http://mailman.mit.edu/pipermail/sap-wug/attachments/20100304/28fd68f1/a<br>> ttachment-0001.htm<br>> <br>> ------------------------------<br>> <br>> Message: 4<br>> Date: Thu, 4 Mar 2010 08:49:39 +0000<br>> From: Ali Husain <mr_mago40@hotmail.com><br>> Subject: Reading and Writing Attributes of a Business Object<br>> To: <sap-wug@MIT.EDU><br>> Message-ID: <BAY130-W20D638F4C727919D2DB1158F390@phx.gbl><br>> Content-Type: text/plain; charset="windows-1252"<br>> <br>> <br>> <br>> Hello WF Experts,<br>> <br>> I have two questions regarding reading/writing attributes of a business<br>> object.<br>> <br>> <br>> <br>> 1. <br>> How to read a value of an<br>> attribute from within another attribute?<br>> <br>> <br>> When programming an attribute we can access the keys directly<br>> from within the attribute by using OBJECTKEY-NAME. How would I access<br>> the value of other attributes using a similar<br>> way?<br>> <br>> <br>> 2. <br>> How to write different variables<br>> to different attributes while programming in one attribute?<br>> <br>> <br>> Let?s say I have calculated many values within the<br>> attribute and I want each of them to be a separate attribute. I want to<br>> avoid<br>> re-programming the same thing in the other attributes since would have<br>> already<br>> retrieved the needed data from within one attribute. I also don?t want<br>> to use a<br>> multiline attribute since I need each value to be its own attribute.<br>> <br>> <br>> Thanks a lot for the help.<br>> <br>> Ali<br>> <br>> <br>>                                            <br>> _________________________________________________________________<br>> Hotmail: Powerful Free email with security by Microsoft.<br>> http://clk.atdmt.com/GBL/go/201469230/direct/01/<br>> -------------- next part --------------<br>> An HTML attachment was scrubbed...<br>> URL:<br>> http://mailman.mit.edu/pipermail/sap-wug/attachments/20100304/74b5dd3a/a<br>> ttachment.htm<br>> <br>> ------------------------------<br>> <br>> _______________________________________________<br>> SAP-WUG mailing list<br>> SAP-WUG@mit.edu<br>> http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> <br>> <br>> End of SAP-WUG Digest, Vol 64, Issue 6<br>> **************************************<br>> <br>> The information contained within this e-mail and any files attached to this e-mail is private and in addition may include commercially sensitive information. The contents of this e-mail are for the intended recipient only and therefore if you wish to disclose the information contained within this e-mail or attached files, please contact the sender prior to any such disclosure. <br>> If you are not the intended recipient, any disclosure, copying or distribution is prohibited. Please also contact the sender and inform them of the error and delete the e-mail, including any attached files from your system. <br>> EADS Defence and Security Systems Limited <br>> Registered Office : Quadrant House, Celtic Springs, Coedkernew, Newport , NP10 8FZ <br>> Company No: 04191036 <br>> http://www.eadsdsuk.com<br>> The information contained within this e-mail and any files attached to this e-mail is private and in addition may include commercially sensitive information. The contents of this e-mail are for the intended recipient only and therefore if you wish to disclose the information contained within this e-mail or attached files, please contact the sender prior to any such disclosure. <br>> If you are not the intended recipient, any disclosure, copying or distribution is prohibited. Please also contact the sender and inform them of the error and delete the e-mail, including any attached files from your system. <br>> EADS Defence and Security Systems Limited <br>> Registered Office : Quadrant House, Celtic Springs, Coedkernew, Newport , NP10 8FZ <br>> Company No: 04191036 <br>> http://www.eadsdsuk.com<br>> <br>> <br>> <br>> ------------------------------<br>> <br>> Message: 2<br>> Date: Thu, 4 Mar 2010 11:00:18 -0000 (GMT)<br>> From: "Mike Pokraka" <wug@workflowconnections.com><br>> Subject: RE: Incoming Emails and SO28<br>> To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> Message-ID:<br>>         <09938fed9e1fe7b769dd228e498f6381.squirrel@g.mail.aaisp.net.uk><br>> Content-Type: text/plain;charset=iso-8859-1<br>> <br>> 42!<br>> <br>> On Tue, March 2, 2010 10:34 am, ????? ????? wrote:<br>> > ??, ????? ????<br>> ><br>> > From: sap-wug-bounces@mit.edu [mailto:sap-wug-bounces@mit.edu] On Behalf<br>> > Of Shai Eyal<br>> > Sent: Tuesday, March 02, 2010 12:24 PM<br>> > To: sap-wug@mit.edu<br>> > Subject: Re: Incoming Emails and SO28<br>> ><br>> > Sudhir,<br>> ><br>> > My efforts receiving incoming mail via SO28 resulted nothing.<br>> > What exactly did you put there?<br>> > Eventually I created simple class and set it in SO50 - this one works like<br>> > a clock.<br>> > As for debug, I did that via SE24 while instantiating the class.<br>> ><br>> ><br>> > Regards,<br>> > Shai Eyal<br>> ><br>> > SAP Logistics senior consultant<br>> > SAP Workflow & BPM specialist<br>> ><br>> > http://www.linkedin.com/in/shaieyal<br>> > Mobile: 972-52-5816633<br>> ><br>> ><br>> > ________________________________<br>> > From: "sap-wug-request@mit.edu" <sap-wug-request@mit.edu><br>> > To: sap-wug@mit.edu<br>> > Sent: Tuesday, March 2, 2010 12:00:00<br>> > Subject: SAP-WUG Digest, Vol 64, Issue 1<br>> ><br>> > Send SAP-WUG mailing list submissions to<br>> > sap-wug@mit.edu<mailto:sap-wug@mit.edu><br>> ><br>> > To subscribe or unsubscribe via the World Wide Web, visit<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> > or, via email, send a message with subject or body 'help' to<br>> > sap-wug-request@mit.edu<mailto:sap-wug-request@mit.edu><br>> ><br>> > You can reach the person managing the list at<br>> > sap-wug-owner@mit.edu<mailto:sap-wug-owner@mit.edu><br>> ><br>> > When replying, please edit your Subject line so it is more specific<br>> > than "Re: Contents of SAP-WUG digest..."<br>> ><br>> ><br>> > Today's Topics:<br>> ><br>> > 1. Incoming Emails and SO28 (Sudhir Pargaonkar)<br>> > 2. correlations using BP address<br>> > (Paul.Bakker@osr.treasury.qld.gov.au<mailto:Paul.Bakker@osr.treasury.qld.gov.au>)<br>> > 3. Re: correlations using BP address (Florin Wach)<br>> > 4. RE: Enqueue Errors - ECC 6.0 (Catherall, Andy)<br>> ><br>> ><br>> > ----------------------------------------------------------------------<br>> ><br>> > Message: 1<br>> > Date: Mon, 1 Mar 2010 18:16:37 -0600<br>> > From: Sudhir Pargaonkar <pargov@gmail.com<mailto:pargov@gmail.com>><br>> > Subject: Incoming Emails and SO28<br>> > To: "SAP Workflow Users' Group" <sap-wug@mit.edu<mailto:sap-wug@mit.edu>><br>> > Message-ID:<br>> > <f81781fe1003011616y73a7d84cp1bc6bdbcd7c84b24@mail.gmail.com<mailto:f81781fe1003011616y73a7d84cp1bc6bdbcd7c84b24@mail.gmail.com>><br>> > Content-Type: text/plain; charset="iso-8859-1"<br>> ><br>> > Hi All,<br>> ><br>> > We are using SO28 and own business object to process incoming emails. We<br>> > are<br>> > using SAP ECC 6.0<br>> ><br>> > The business object I created has IFRECEIVE interface and I modified the<br>> > 'RECEIVE' method of the object.<br>> ><br>> > Here is my question:<br>> ><br>> > 1) When I use 'wi_mailrec' in SO28, it doesn't fail but when I use the<br>> > business object I created, sender gets a message saying, delivery of the<br>> > email failed.<br>> > 2) How do I debug / test this 'Receive' method? How to test these incoming<br>> > emails? they work fine if sent without SO28 rule and show up in business<br>> > workplace.<br>> ><br>> > Any input would be appreciated.<br>> ><br>> > Thanks a lot.<br>> ><br>> > Regards,<br>> > Sudhir Pargaonkar<br>> > -------------- next part --------------<br>> > An HTML attachment was scrubbed...<br>> > URL:<br>> > http://mailman.mit.edu/pipermail/sap-wug/attachments/20100301/99e9c2e2/attachment-0001.htm<br>> ><br>> > ________________________________<br>> > Get your new Email address!<br>> > <http://sg.rd.yahoo.com/aa/mail/domainchoice/mail/signature/*http:/mail.promotions.yahoo.com/newdomains/aa/><br>> > Grab the Email name you've always wanted before someone else does!<br>> ><br>> > ________________________________<br>> > ????? ???, ????? ????? ????? ??????? ?????? ??, ?? ????, ???????? ?? ???<br>> > ???? ?????, ??????? ???? ???? ????? ?? ??? ????? ?????? ?? ?????, ????? ??<br>> > ???? ????? ?? ??? ?????? ??????? ????? ?????. ????? ???? ????? (????? ????<br>> > ????) ?????? ?????? ???? ???????? ???, ??? ????? ????? ?????? ??? ????<br>> > ????? ?????, ???? ?????? ???? ?????? ????? ????? ?? ?????? ?????.<br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> ><br>> <br>> <br>> <br>> <br>> ------------------------------<br>> <br>> Message: 3<br>> Date: Thu, 04 Mar 2010 14:02:18 +0100<br>> From: "Florin Wach" <florin.wach@gmx.net><br>> Subject: Re: Reading and Writing Attributes of a Business Object<br>> To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> Message-ID: <20100304130218.164680@gmx.net><br>> Content-Type: text/plain; charset="utf-8"<br>> <br>> <br>> -------- Original-Nachricht --------<br>> > Datum: Thu, 4 Mar 2010 08:49:39 +0000<br>> > Von: Ali Husain <mr_mago40@hotmail.com><br>> > An: sap-wug@mit.edu<br>> > Betreff: Reading and Writing Attributes of a Business Object<br>> <br>> > <br>> > <br>> > Hello WF Experts,<br>> > <br>> > I have two questions regarding reading/writing attributes of a business<br>> > object.<br>> > <br>> > <br>> > <br>> > 1. <br>> > How to read a value of an<br>> > attribute from within another attribute?<br>> > <br>> > <br>> > When programming an attribute we can access the keys directly<br>> > from within the attribute by using OBJECTKEY-NAME. How would I access the<br>> > value of other attributes using a similar<br>> > way?<br>> <br>> DATA: lv_value TYPE C.<br>> swc_get_property self 'PropertyName' lv_value.<br>> "Take care about endless loops when using get_property within db-attributes<br>> <br>> <br>> <br>> > <br>> > <br>> > 2. <br>> > How to write different variables<br>> > to different attributes while programming in one attribute?<br>> > <br>> > <br>> > Let?s say I have calculated many values within the<br>> > attribute and I want each of them to be a separate attribute. I want to<br>> > avoid<br>> > re-programming the same thing in the other attributes since would have<br>> > already<br>> > retrieved the needed data from within one attribute. I also don?t want<br>> > to use a<br>> > multiline attribute since I need each value to be its own attribute.<br>> <br>> More tricky. Let's assume that you have two attributes: Attrib_A and Attrib_B.<br>> In Attrib_A you do the calculation for both, A and B.<br>> In Attrib_B you want to pick up the calculation of A, but you don't know, if A was already executed or not.<br>> <br>> This is how I did it:<br>> <br>> GET_PROPERTY attrib_a.<br>> object-attrib_a = 23. "Let's say, that is the result of the calc<br>> object-attrib_b = 42. "This will make Mike happy<br>> swc_set_element container 'ATTRIB_A' object-attrib_a. "Must-do for virtual attributes<br>> <br>> END_PROPERTY.<br>> <br>> GET_PROPERTY attrib_b.<br>> IF object-attrib_b IS INITIAL.<br>> "Refresh<br>> swc_get_property self 'Attrib_a' object-attrib_a.<br>> ENDIF.<br>> swc_set_element container 'ATTRIB_B' object-attrib_b.<br>> END_PROPERTY.<br>> <br>> <br>> <br>> <br>> <br>> > <br>> > <br>> > Thanks a lot for the help.<br>> > <br>> > Ali<br>> > <br>> > <br>> >                                            <br>> > _________________________________________________________________<br>> > Hotmail: Powerful Free email with security by Microsoft.<br>> > http://clk.atdmt.com/GBL/go/201469230/direct/01/<br>> <br>> <br>> ------------------------------<br>> <br>> Message: 4<br>> Date: Thu, 4 Mar 2010 14:19:17 -0000 (GMT)<br>> From: "Mike Pokraka" <wug@workflowconnections.com><br>> Subject: RE: Resolving responsibility rule<br>> To: "SAP Workflow Users' Group" <sap-wug@MIT.EDU><br>> Message-ID:<br>>         <8066547625fcf740eb1f6fe12ce04bb2.squirrel@g.mail.aaisp.net.uk><br>> Content-Type: text/plain;charset=iso-8859-1<br>> <br>> Hi Carmen,<br>> <br>> If it helps, SAP differentiates between 'blank' and 'not supplied'. A<br>> field that is not supplied is not compared and will thus match any value.<br>> <br>> This usually works fine at runtime when a field containing a blank value<br>> is bound in, but when simulating the rule you probably did not enter<br>> anything -> the rule simulation treats this as 'not supplied'. Put a space<br>> into the rule simulation and it should behave as you expect.<br>> <br>> Cheers,<br>> Mike<br>> <br>> <br>> <br>> On Tue, March 2, 2010 1:55 pm, Carmen Cheung wrote:<br>> > Thanks Sheldon,<br>> ><br>> > That's exactly what I've found with the blank fields as wildcards. It just<br>> > seemed a bit buggy to me. I'll take your advice on board.<br>> ><br>> > Cheers,<br>> ><br>> > Carmen<br>> > ________________________________________<br>> > From: sap-wug-bounces@mit.edu [sap-wug-bounces@mit.edu] On Behalf Of<br>> > Sheldon Oxenberg [soxenber@csc.com]<br>> > Sent: 02 March 2010 13:44<br>> > To: SAP Workflow Users' Group<br>> > Subject: Re: Resolving responsibility rule<br>> ><br>> > Hi Carmen,<br>> ><br>> > When you simulate with test data of Employee Group= 01 and Subgroup= 06,<br>> > what test data are you using for the fields company code and personnel<br>> > area?<br>> ><br>> > We find that if test data fields (e.g. company code and personnel area)<br>> > are<br>> > BLANK, then they match like they are '*'. We prefill the BLANK fields<br>> > with<br>> > '...', and everything then works as required.<br>> ><br>> > Regards,<br>> ><br>> > SHELDON OXENBERG<br>> > System Architect Principal Leader<br>> > LMP Technical Architect, SAP Workflow<br>> > CSC<br>> ><br>> ><br>> ><br>> ><br>> > From: Carmen Cheung <Carmen.Cheung@hcl-axon.com><br>> ><br>> > To: "sap-wug@mit.edu" <sap-wug@mit.edu><br>> ><br>> > Date: 03/02/2010 08:13 AM<br>> ><br>> > Subject: Resolving responsibility rule<br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> > Hi there,<br>> ><br>> > I'm currently facing an issue resolving the users for our custom<br>> > responsibility rule.<br>> ><br>> > I have one responsibility record, with all four elements populated with<br>> > defined values<br>> > Company Code: 1254<br>> > Employee Group: 01<br>> > Employee Subgroup: 06<br>> > Personnel Area: 1254<br>> ><br>> > The second responsibility record only has Employee Group and Sub Group<br>> > defined:<br>> > Company Code: *<br>> > Employee Group: 01<br>> > Employee Subgroup: 06<br>> > Personnel Area: *:<br>> ><br>> > The problem is, when I simulate the rule or run<br>> > RH_RESOLVE_RESPONSIBILITIES<br>> > with test data of Employee Group= 01 and Subgroup= 06, the agents assigned<br>> > to both the records are returned even when neither the company code or<br>> > personnel area equal 1254.<br>> ><br>> > I've played around with the priorities of the records but it still returns<br>> > the same error.<br>> ><br>> > I'd really appreciate your advice on this one, it's probably a really<br>> > simple answer.<br>> ><br>> > Many thanks,<br>> ><br>> > Carmen<br>> ><br>> ><br>> ><br>> ><br>> > Disclaimer: The contents of this e-mail and any attachment(s) are<br>> > confidential and intended for the named recipient(s) only. It shall not<br>> > attach any liability on the originator or HCL or its affiliates. Any views<br>> > or opinions presented in this email are solely those of the author and may<br>> > not necessarily reflect the opinions of HCL or its affiliates. Any form of<br>> > reproduction, dissemination, copying, disclosure, modification,<br>> > distribution and / or publication of this message without prior written<br>> > consent of the author of this e-mail is strictly prohibited. If you have<br>> > received this email in error please delete it and notify the sender<br>> > immediately. Before opening any mail and attachments please check them for<br>> > viruses and defect.<br>> ><br>> > Axon Solutions Limited. Registered Office: Axon Centre, Church Road,<br>> > Egham,<br>> > Surrey, TW20 9QB, UK. Registered in England & Wales under Company No.<br>> > 2976395. Axon Solutions Limited is a limited company.<br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> ><br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> ><br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> ><br>> <br>> <br>> <br>> <br>> ------------------------------<br>> <br>> Message: 5<br>> Date: Fri, 5 Mar 2010 01:37:13 +1100<br>> From: Neil Gardiner <neil.gardiner@gmail.com><br>> Subject: Re: SAP-WUG Digest, Vol 64, Issue 6<br>> To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> Message-ID: <A50F41B6-B976-4FFE-923C-83B2E3FB480B@gmail.com><br>> Content-Type: text/plain;        charset=us-ascii;        format=flowed;        delsp=yes<br>> <br>> Where are you declaring your include statement. As longs as this is <br>> done in the top include you should not have any issues.<br>> <br>> On 4 Mar 2010, at 21:07, "John Howarth" <John.Howarth@eads.com> wrote:<br>> <br>> > Hi<br>> ><br>> > On a 4.6C system. I am trying to trigger a Goods Receipt event from <br>> > BADI<br>> > (rather than a FM) I cant use the <CNTN01> include because of 'LIKE'<br>> > statements in the code.<br>> > Has anyone got example of the code I can use .<br>> ><br>> > Kind Regards,<br>> ><br>> > John Howarth<br>> ><br>> > SAP PLM Technical Support<br>> ><br>> ><br>> ><br>> > EADS Defence and Security Systems<br>> ><br>> > ( Contact: 01633 715315<br>> ><br>> > * Email: john.howarth@eads.com<br>> ><br>> ><br>> ><br>> > -----Original Message-----<br>> > From: sap-wug-bounces@mit.edu [mailto:sap-wug-bounces@mit.edu] On <br>> > Behalf<br>> > Of sap-wug-request@mit.edu<br>> > Sent: 04 March 2010 08:50<br>> > To: sap-wug@mit.edu<br>> > Subject: SAP-WUG Digest, Vol 64, Issue 6<br>> ><br>> > Send SAP-WUG mailing list submissions to<br>> > sap-wug@mit.edu<br>> ><br>> > To subscribe or unsubscribe via the World Wide Web, visit<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> > or, via email, send a message with subject or body 'help' to<br>> > sap-wug-request@mit.edu<br>> ><br>> > You can reach the person managing the list at<br>> > sap-wug-owner@mit.edu<br>> ><br>> > When replying, please edit your Subject line so it is more specific<br>> > than "Re: Contents of SAP-WUG digest..."<br>> ><br>> ><br>> > Today's Topics:<br>> ><br>> > 1. Problem submitting ML85 report (Shai Eyal)<br>> > 2. User. Created / User Cloned/Changed Event is not triggered<br>> > (Kesav P)<br>> > 3. User. Created / User Cloned/Changed Event is not triggered<br>> > (Karl Nietz)<br>> > 4. Reading and Writing Attributes of a Business Object (Ali Husain)<br>> ><br>> ><br>> > ----------------------------------------------------------------------<br>> ><br>> > Message: 1<br>> > Date: Wed, 3 Mar 2010 11:02:34 -0800 (PST)<br>> > From: Shai Eyal <shai.eyal@yahoo.com><br>> > Subject: Problem submitting ML85 report<br>> > To: sap-wug <sap-wug@mit.edu><br>> > Message-ID: <277958.74287.qm@web59105.mail.re1.yahoo.com><br>> > Content-Type: text/plain; charset="iso-8859-1"<br>> ><br>> > Hello experts,<br>> ><br>> > I have this strange issue. I've build workflow for service entry sheet<br>> > release and it works OK.?I'm trying to add "collective release"<br>> > functionality by navigating user to ML85. If I use "call transaction<br>> > ML85", it works fine. But since SAP standard?program does not GET <br>> > MEMORY<br>> > ID LBL (service entry sheet number) then I can't work this way.<br>> > Therefore I changed my source to?"submit?RMSRVF00 using<br>> > selection...".?Now it gets weird - if I place my source in SE38 dummy<br>> > program, it works great.?But when it is executed via SWO1, it?result a<br>> > list w\o buttons to release.<br>> ><br>> > Any idea?<br>> > Thanks in advance,<br>> > ?<br>> > Regards,<br>> > Shai Eyal<br>> > SAP Logistics senior consultant<br>> > SAP Workflow & BPM specialist<br>> > http://www.linkedin.com/in/shaieyal<br>> > Mobile: 972-52-5816633<br>> ><br>> ><br>> > New Email names for you!<br>> > Get the Email name you&#39;ve always wanted on the new @ymail and<br>> > @rocketmail.<br>> > Hurry before someone else does!<br>> > http://mail.promotions.yahoo.com/newdomains/aa/<br>> > -------------- next part --------------<br>> > An HTML attachment was scrubbed...<br>> > URL:<br>> > http://mailman.mit.edu/pipermail/sap-wug/attachments/20100303/21063617/a<br>> > ttachment-0001.htm<br>> ><br>> > ------------------------------<br>> ><br>> > Message: 2<br>> > Date: Wed, 3 Mar 2010 18:54:26 -0800 (PST)<br>> > From: Kesav P <pachallak@yahoo.com><br>> > Subject: User. Created / User Cloned/Changed Event is not triggered<br>> > To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> > Message-ID: <645787.5356.qm@web56403.mail.re3.yahoo.com><br>> > Content-Type: text/plain; charset="iso-8859-1"<br>> ><br>> > Hi,<br>> ><br>> ><br>> > We are on ECC 6.0, Non-CUA environment and HR module?is not being <br>> > used.<br>> ><br>> > We are trying to trigger a workflow When a SAP User is created using<br>> > SU01 or changed user data using?su3.?<br>> ><br>> > The problem is that the User.Created or User.cloned/changed events are<br>> > not?being?triggered?.<br>> > I have verified event log with SWEL?and no events are?appearing.<br>> ><br>> > I would like to know is there any specific setup required?to generate<br>> > these above events.?<br>> > Appreciate your time.<br>> ><br>> > Thanks<br>> > Kesav<br>> ><br>> ><br>> ><br>> > -------------- next part --------------<br>> > An HTML attachment was scrubbed...<br>> > URL:<br>> > http://mailman.mit.edu/pipermail/sap-wug/attachments/20100303/5dbfa82a/a<br>> > ttachment-0001.htm<br>> ><br>> > ------------------------------<br>> ><br>> > Message: 3<br>> > Date: Thu, 4 Mar 2010 13:30:57 +1000<br>> > From: Karl Nietz <knietz@csc.com.au><br>> > Subject: User. Created / User Cloned/Changed Event is not triggered<br>> > To: "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> > Message-ID:<br>> ><br>> > <OFD30C83B0.3CF25DD3-ONCA2576DC.00127D51-CA2576DC.001350C0@csc.com><br>> > Content-Type: text/plain; charset="us-ascii"<br>> ><br>> > Kesav,<br>> ><br>> > I don't think the SU01/SU03 transactions publish events internally. <br>> > You<br>> ><br>> > could see if a change document is published and then configure <br>> > events in<br>> ><br>> > transaction SWEC, but it is again possible that change docs are also <br>> > not<br>> ><br>> > created. If not, examine the underlying tables (USR01 etc) to see if<br>> > change document creation is activated and adjust if possible and try<br>> > again. If this does not work then you could establish if an exit <br>> > exists<br>> ><br>> > in the code and if so publish your own events. But I must admit I <br>> > have<br>> > distant memories of once trying this and getting nohwere. See what <br>> > the<br>> > other contributors suggest too.<br>> ><br>> ><br>> > Karl Nietz<br>> ><br>> ><br>> ><br>> ><br>> > From:<br>> > Kesav P <pachallak@yahoo.com><br>> > To:<br>> > "SAP Workflow Users' Group" <sap-wug@mit.edu><br>> > Date:<br>> > 04/03/2010 02:00 PM<br>> > Subject:<br>> > User. Created / User Cloned/Changed Event is not triggered<br>> ><br>> ><br>> ><br>> > Hi,<br>> ><br>> > We are on ECC 6.0, Non-CUA environment and HR module is not being <br>> > used.<br>> ><br>> > We are trying to trigger a workflow When a SAP User is created using<br>> > SU01<br>> > or changed user data using su3.<br>> ><br>> > The problem is that the User.Created or User.cloned/changed events are<br>> > not<br>> > being triggered .<br>> > I have verified event log with SWEL and no events are appearing.<br>> ><br>> > I would like to know is there any specific setup required to generate<br>> > these above events.<br>> > Appreciate your time.<br>> ><br>> > Thanks<br>> > Kesav<br>> ><br>> ><br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> ><br>> ><br>> > -------------- next part --------------<br>> > An HTML attachment was scrubbed...<br>> > URL:<br>> > http://mailman.mit.edu/pipermail/sap-wug/attachments/20100304/28fd68f1/a<br>> > ttachment-0001.htm<br>> ><br>> > ------------------------------<br>> ><br>> > Message: 4<br>> > Date: Thu, 4 Mar 2010 08:49:39 +0000<br>> > From: Ali Husain <mr_mago40@hotmail.com><br>> > Subject: Reading and Writing Attributes of a Business Object<br>> > To: <sap-wug@MIT.EDU><br>> > Message-ID: <BAY130-W20D638F4C727919D2DB1158F390@phx.gbl><br>> > Content-Type: text/plain; charset="windows-1252"<br>> ><br>> ><br>> ><br>> > Hello WF Experts,<br>> ><br>> > I have two questions regarding reading/writing attributes of a <br>> > business<br>> > object.<br>> ><br>> ><br>> ><br>> > 1.<br>> > How to read a value of an<br>> > attribute from within another attribute?<br>> ><br>> ><br>> > When programming an attribute we can access the keys directly<br>> > from within the attribute by using OBJECTKEY-NAME. How would I access<br>> > the value of other attributes using a similar<br>> > way?<br>> ><br>> ><br>> > 2.<br>> > How to write different variables<br>> > to different attributes while programming in one attribute?<br>> ><br>> ><br>> > Let?s say I have calculated many values within the<br>> > attribute and I want each of them to be a separate attribute. I want <br>> > to<br>> > avoid<br>> > re-programming the same thing in the other attributes since would have<br>> > already<br>> > retrieved the needed data from within one attribute. I also don?t want<br>> > to use a<br>> > multiline attribute since I need each value to be its own attribute.<br>> ><br>> ><br>> > Thanks a lot for the help.<br>> ><br>> > Ali<br>> ><br>> ><br>> ><br>> > _________________________________________________________________<br>> > Hotmail: Powerful Free email with security by Microsoft.<br>> > http://clk.atdmt.com/GBL/go/201469230/direct/01/<br>> > -------------- next part --------------<br>> > An HTML attachment was scrubbed...<br>> > URL:<br>> > http://mailman.mit.edu/pipermail/sap-wug/attachments/20100304/74b5dd3a/a<br>> > ttachment.htm<br>> ><br>> > ------------------------------<br>> ><br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> ><br>> ><br>> > End of SAP-WUG Digest, Vol 64, Issue 6<br>> > **************************************<br>> ><br>> > The information contained within this e-mail and any files attached <br>> > to this e-mail is private and in addition may include commercially <br>> > sensitive information. The contents of this e-mail are for the <br>> > intended recipient only and therefore if you wish to disclose the <br>> > information contained within this e-mail or attached files, please <br>> > contact the sender prior to any such disclosure.<br>> > If you are not the intended recipient, any disclosure, copying or <br>> > distribution is prohibited. Please also contact the sender and <br>> > inform them of the error and delete the e-mail, including any <br>> > attached files from your system.<br>> > EADS Defence and Security Systems Limited<br>> > Registered Office : Quadrant House, Celtic Springs, Coedkernew, <br>> > Newport , NP10 8FZ<br>> > Company No: 04191036<br>> > http://www.eadsdsuk.com<br>> > The information contained within this e-mail and any files attached <br>> > to this e-mail is private and in addition may include commercially <br>> > sensitive information. The contents of this e-mail are for the <br>> > intended recipient only and therefore if you wish to disclose the <br>> > information contained within this e-mail or attached files, please <br>> > contact the sender prior to any such disclosure.<br>> > If you are not the intended recipient, any disclosure, copying or <br>> > distribution is prohibited. Please also contact the sender and <br>> > inform them of the error and delete the e-mail, including any <br>> > attached files from your system.<br>> > EADS Defence and Security Systems Limited<br>> > Registered Office : Quadrant House, Celtic Springs, Coedkernew, <br>> > Newport , NP10 8FZ<br>> > Company No: 04191036<br>> > http://www.eadsdsuk.com<br>> ><br>> > _______________________________________________<br>> > SAP-WUG mailing list<br>> > SAP-WUG@mit.edu<br>> > http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> <br>> <br>> ------------------------------<br>> <br>> _______________________________________________<br>> SAP-WUG mailing list<br>> SAP-WUG@mit.edu<br>> http://mailman.mit.edu/mailman/listinfo/sap-wug<br>> <br>> <br>> End of SAP-WUG Digest, Vol 64, Issue 7<br>> **************************************<br>                                            <br /><hr />Hotmail: Free, trusted and rich email service. <a href='http://clk.atdmt.com/GBL/go/201469228/direct/01/' target='_new'>Get it now.</a></body>
</html>