Delete a Sub Object Type attribute in 4.6C from 4.0B

[Kevin Yu]

"Dart, Jocelyn" wrote:
>
> Hi Kevin,
> Virtual attributes need to have some program coding attached to
> them.  Sounds like that attribute isn't coded.  You need to do
> some workflow programming in the object program to implement
> the virtual attribute - that's probably what the error message is
> trying to tell you.  Suggest you grab a friendly workflow programmer
> or look at the tutorial on object programming in the SAP library
> for some further help.
> Regards,
> Jocelyn
>
> -----Original Message-----
>> From: Kevin Yu [mailto:kevin.yu at its.monash.edu.au]
> Sent: Tuesday, 18 December 2001 10:55 AM
> To: SAP-WUG at MITVMA.MIT.EDU
> Subject: Re: Delete a Sub Object Type attribute in 4.6C from 4.0B
>
> Hi Jocelyn,
>
> I tried to change the data type reference from the ZFIPP business object
> program.  I found a field TCPFS3B-TIME which use the same data element
> to replace SYST-TSTLO.  I still cannot generate the Object.  When I look
> at the error list, it always takes me back to attribute dialog.  The
> reference data is still SYST-TSTLO in the attribute dialog.
>
> Am I doing the right thing or anything you can think of I have missed
> out?
>
> Regards,
>
> Kevin.
>
> "Dart, Jocelyn" wrote:
> >
> > Hi Kevin,
> > Try going into your ZFIPP business object program.  At the top of
> > the program all the actual data type references for your attributes
> > are listed.  Try changing the data type reference there and regenerating
> > the program while you are in it, instead of attempting to use the
> > attribute dialogs.  Once the program is ok, you should be able to
> > check the attribute dialogs.
> > Regards,
> >         Jocelyn Dart
> > Consultant (EBP, BBP, Ecommerce, Internet Transaction Server, Workflow)
> > SAP Australia
> > Email jocelyn.dart at sap.com <mailto:jocelyn.dart at sap.com>
> > Tel: +61 412 390 267
> > Fax: +61 2 9935 4880
> >
> > -----Original Message-----
> > From: Kjetil Kilhavn [mailto:KJETILK at statoil.com]
> > Sent: Tuesday, 11 December 2001 7:36 PM
> > To: SAP-WUG at MITVMA.MIT.EDU
> > Subject: Re: Delete a Sub Object Type attribute in 4.6C from 4.0B
> >
> > If you have changed system names (e.g. from D01 to D02) in your
> development
> > system you could try to set the "original system" (or whatever it is
> called)
> > attribute of the ZFIPP object type to the new system name. Not sure if it
> > helps,
> > but it could be worth a try.
> > --
> > Kjetil Kilhavn
> >
> > |--------+------------------------------>
> > |        |          Kevin Yu            |
> > |        |          <kevin.yu at its.monash|
> > |        |          .edu.au>            |
> > |        |          Sent by: SAP        |
> > |        |          Workflow            |
> > |        |          <Owner-SAP-WUG at MITVM|
> > |        |          A.MIT.EDU>          |
> > |        |                              |
> > |        |                              |
> > |        |          11.12.2001 05:47    |
> > |        |          Please respond to   |
> > |        |          "SAP Workflow Users'|
> > |        |          Group"              |
> > |        |                              |
> > |--------+------------------------------>
> >
> >
> >---------------------------------------------------------------------------
> > -|
> >   |
> > |
> >   |       To:     SAP-WUG at MITVMA.MIT.EDU
> > |
> >   |       cc:     (bcc: Kjetil Kilhavn)
> > |
> >   |       Subject:     Delete a Sub Object Type attribute in 4.6C from
> 4.0B
> > |
> >
> >
> >---------------------------------------------------------------------------
> > -|
> >
> > Hi,
> >
> > I am working on 4.0B to 4.6C upgrade.
> >
> > We have a subtype ZFIPP of FIPP.  A custom attribute was created in
> > ZFIPP at 4.0B.  After the system is in 4.6C, we found that ZFIPP cannot
> > be generated due to the attribute is referencing a SYST field and this
> > SYST field has been dropped in 4.6C.
> >
> > First, it seems that we cannot change Data type reference (cannot change
> > the reference field) in 4.6C.  Second, we cannot delete the attribute
> > and redo it.  While we were deleting the attribute, 4.6C system
> > complains about the attribute is from other system and cannot be
> > deleted.
> >
> > Is there any way to fix this problem?
> >
> > Thanks,
Hi Jocelyn,
 
Thanks,  I have managed to change the attribute.
 
Regards,
Kevin.
 
> >
> > Kevin.
> >
> > -------------------------------------------------------------------
> > Statoil: The information contained in this message may be CONFIDENTIAL and
> > is
> > intended for the addressee only. Any unauthorised use, dissemination of
> the
> > information or copying of this message is prohibited. If you are not the
> > addressee, please notify the sender immediately by return e-mail and
> delete
> > this
> > message.
> > Thank you.