[panda-users] about asidstory plugin

[Aleksandar Nikolich]

You need to add "win7x86intro" plug-in too and it should work.

On Thursday, April 23, 2015, xiaojuan Li <xiaotan6666 at gmail.com> wrote:

>
> Hi,
> I tried the asidstory plugin: -replay ******* -panda 'asidstory'
> and then segfault:
>
> ************************************************************************************
> adding
> /home/shentanli/pandanew/qemu/arm-softmmu/panda_plugins/panda_asidstory.so
> to panda_plugin_files 0
> emulator: registered 'boot-properties' qemud service
> emulator: Adding boot property: 'dalvik.vm.heapsize' = '48m'
> emulator: Adding boot property: 'qemu.sf.fake_camera' = 'both'
> emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
> loading
> /home/shentanli/pandanew/qemu/arm-softmmu/panda_plugins/panda_asidstory.so
> Initializing plugin asidstory
> panda_require: osi
> loading
> /home/shentanli/pandanew/qemu/arm-softmmu/panda_plugins/panda_osi.so
> Success
> Success
> goldfish_add_device: goldfish_device_bus, base ff001000 1000, irq 1 1
> goldfish_device_bus: ff001000     30
> goldfish_add_device: goldfish_int, base ff000000 1000, irq 0 0
> goldfish_int: ff000000     38
> goldfish_add_device: goldfish_timer, base ff003000 1000, irq 3 1
> goldfish_timer: ff003000     40
> goldfish_add_device: goldfish_rtc, base ff010000 1000, irq 10 1
> goldfish_rtc: ff010000     48
> goldfish_add_device: goldfish_tty, base ff002000 1000, irq 4 1
> goldfish_tty: ff002000     50
> android_arm_init serial 1 0
> android_arm_init serial 2 0
> android_arm_init serial 3 0
> goldfish_add_device: smc91x, base ff011000 1000, irq 11 1
> goldfish_add_device: goldfish_fb, base ff012000 1000, irq 12 1
> goldfish_fb: ff012000     68
> Using tmpfile for SD card: /tmp/android-shentanli/emulator-pQEpMo
> goldfish_add_device: goldfish_mmc, base ff005000 1000, irq 13 1
> goldfish_mmc: ff005000     70
> goldfish_add_device: goldfish_memlog, base ff006000 1000, irq 0 0
> goldfish_memlog: ff006000     78
> goldfish_add_device: goldfish-battery, base ff013000 1000, irq 14 1
> goldfish-battery: ff013000     80
> goldfish_add_device: goldfish_events, base ff014000 1000, irq 15 1
> goldfish_events: ff014000     88
> Using event IRQ
> Invalid system partition size for non-QCOW image: 0emulator: geometry says
> there are 0 blocks
>
> emulator: Dev size of /tmp/android-shentanli/emulator-U4lzIR is 0
>
> Invalid data partition size for non-QCOW image: 0emulator: Dev size 0x0
> came from argument
>
> emulator: geometry says there are 0 blocks
>
> emulator: Dev size of /tmp/android-shentanli/emulator-DAYKEk is 0
>
> emulator: Dev size 0x0 came from argument
>
> emulator: geometry says there are 0 blocks
>
> emulator: Dev size of /tmp/android-shentanli/emulator-KUsYAN is 0
>
> goldfish_add_device: goldfish_nand, base ff015000 1000, irq 16 1
> goldfish_nand: ff015000     90
> goldfish_add_device: qemu_pipe, base ff016000 2000, irq 17 1
> qemu_pipe: ff016000     98
> emulator: control console listening on port 5554, ADB on port 5555
> emulator: can't connect to ADB server: Connection refused
> emulator: Realistic sensor emulation is not available, since the remote
> controller is not accessible:
>  Connection refused
> loading snapshot
> emulator: Adding boot property: 'dalvik.vm.heapsize' = '48m'
> emulator: Adding boot property: 'qemu.sf.fake_camera' = 'both'
> emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
> ... done.
>
> Logging all cpu states
> CPU #0:
> R00=0000002f R01=a7d24020 R02=b6ee030c R03=b5312114
> R04=a7bd4908 R05=a7d240a0 R06=a7bd4800 R07=000000c5
> R08=b6f13d94 R09=a7d240dc R10=00000000 R11=aefc7980
> R12=a7bd4818 R13=c1ba5ff8 R14=b6ee0318 R15=ffff0008
> PSR=40000093 -Z-- A svc32
> opening nondet log for read :    ./read-256-smaller-rr-nondet.log
> Segmentation fault (core dumped)
>
> *************************************************************************************
>
> and then gdb find this:
>
> ---------------------------------------------------------------------------------------------------------
> Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
> Core was generated by `./qemu-system-arm -m 256 -replay read-256-smaller
> -M android_arm -kernel /dev/n'.
> Program terminated with signal 11, Segmentation fault.
> #0  asidstory_before_block_exec (env=<optimized out>, tb=<optimized out>)
>     at asidstory.cpp:207
> 207        if (pid_ok(p->pid)) {
> (gdb) print p->pid
> $1 = 0
>
> ----------------------------------------------------------------------------------------------------------
> the func pid_ok just allows pid>=4 but why?
> [image: 内嵌图片 1]
>
> could you spare some time to check this plugin?
> Thanks!
>
> --
> wait and hope~~
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/pipermail/panda-users/attachments/20150423/4c75ce83/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: asidtory.png
Type: image/png
Size: 4134 bytes
Desc: not available
Url : http://mailman.mit.edu/pipermail/panda-users/attachments/20150423/4c75ce83/attachment.png