[panda-users] taint segmentation fault
xiaojuan Li
xiaotan6666 at gmail.com
Sun Apr 12 09:16:35 EDT 2015
any suggestions? about segmentation fault?
and after my test,I make sure it is not caused by insufficient memory.
Thanks a lot!
2015-04-11 11:59 GMT+08:00 xiaojuan Li <xiaotan6666 at gmail.com>:
> excuse me:
> I try to fix the segmentation error:
> and find this piece of code:
>
> do you mean that it doesn't support so large byte?or it doesn't support
> for android arm?
> in the doc I noticed that network tainting is not supported for arm
> architecture,and the string I tainted was something may go through the
> network.
>
> Thanks!
>
>
>
>
>
> 2015-04-09 21:30 GMT+08:00 xiaojuan Li <xiaotan6666 at gmail.com>:
>
>> Now that the panda taint.md is not fresh,can you guys give me some help?
>> I use the replay plugin,here is my command and the result.
>>
>>
>>
>>
>>
>> the content of pk_search_strings.txt is :"sdt"
>>
>> I am confused here:in the paper— Repeatable reverse with panda:
>> :
>> it is clear that:if I use the stringsearch and taint plugin,when it
>> matches, the taint label will be put and then taint action will start.but
>> when I use it, it seems wrong(the picture showed before):no taint action
>> execute,and i am confused about the tstringsearch's result.
>> how can i use it to analysis?
>> Thanks a lot!
>>
>>
>> 2015-04-08 10:14 GMT+08:00 xiaojuan Li <xiaotan6666 at gmail.com>:
>>
>>> I get the replay file by running runandroid script. and i use
>>> qemu-system-arm command just to do some replay work.
>>> I may not understand you at all in this emal.do you mean that i should
>>> gdb the original program rather than the record file?
>>> Thansk
>>>
>>> 2015-04-08 9:52 GMT+08:00 Brendan Dolan-Gavitt <brendandg at gatech.edu>:
>>>
>>>> Hmm. gdb should normally stop when you get a segfault.
>>>>
>>>> Are you by any chance running PANDA using the runandroid script? If so,
>>>> you will need to instead invoke PANDA manually, i.e.:
>>>>
>>>> gdb --args arm-softmmu/qemu-system-arm [...]
>>>>
>>>> And then once it crashes, type "bt" at the gdb prompt to get a
>>>> backtrace.
>>>>
>>>> -Brendan
>>>>
>>>> On Tue, Apr 7, 2015 at 9:47 PM, xiaojuan Li <xiaotan6666 at gmail.com>
>>>> wrote:
>>>>
>>>>> when gdb,it shows:
>>>>> and then i see the log:it shows segfault:
>>>>>
>>>>>
>>>>>
>>>>> 2015-04-08 9:03 GMT+08:00 xiaojuan Li <xiaotan6666 at gmail.com>:
>>>>>
>>>>>> maybe i am wrong.
>>>>>> i use the command
>>>>>> line:"taint2:label_mode=binary,query_outgoing_network=1"and I found that
>>>>>> when i use taint2, after it loads panda_taint2.so,it
>>>>>> shows:"taint2:instructed not to inline taint ops .success".
>>>>>>
>>>>>> 2015-04-08 8:54 GMT+08:00 xiaojuan Li <xiaotan6666 at gmail.com>:
>>>>>>
>>>>>>> ok.
>>>>>>> 1.I want to use taint plugin to get information about some
>>>>>>> functions(of course, it is closed-source),so I think I can stringsearch
>>>>>>> potential data and then taint them and next I can locate the functions
>>>>>>> which solves these data.
>>>>>>>
>>>>>>> 2.the command line I used is : stringsearch:name=***;
>>>>>>> taint2:tainted_instructions=1.
>>>>>>>
>>>>>>> thanks
>>>>>>>
>>>>>>>
>>>>>>> 2015-04-08 8:40 GMT+08:00 Brendan Dolan-Gavitt <brendandg at gatech.edu
>>>>>>> >:
>>>>>>>
>>>>>>>> Could you provide:
>>>>>>>>
>>>>>>>> 1. What information you're trying to get
>>>>>>>> 2. The command line you're using to run PANDA with the taint2 plugin
>>>>>>>>
>>>>>>>> ?
>>>>>>>>
>>>>>>>> Right now I believe taint2 does not produce very much output by
>>>>>>>> default. Instead you use the -pandalog <filename> command line option, and
>>>>>>>> taint2 will write its results there in pandalog format; you can then read
>>>>>>>> them using pandalog_reader (see panda/pandalog_reader.c for details on that
>>>>>>>> tool).
>>>>>>>>
>>>>>>>> -Brendan
>>>>>>>>
>>>>>>>> On Tue, Apr 7, 2015 at 8:32 PM, xiaojuan Li <xiaotan6666 at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> when I tried taint2,it showed the same error with taint1, the olny
>>>>>>>>> difference is that taint2 has no segfault error,just uninit taint plugin.
>>>>>>>>>
>>>>>>>>> 2015-04-08 8:28 GMT+08:00 Brendan Dolan-Gavitt <
>>>>>>>>> brendandg at gatech.edu>:
>>>>>>>>>
>>>>>>>>>> Could you be a little more descriptive about how it failed?
>>>>>>>>>> Segfault? Error message? Incorrect output?
>>>>>>>>>>
>>>>>>>>>> -Brendan
>>>>>>>>>>
>>>>>>>>>> On Tue, Apr 7, 2015 at 8:27 PM, xiaojuan Li <
>>>>>>>>>> xiaotan6666 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> i tried taint2 too,it failed.
>>>>>>>>>>>
>>>>>>>>>>> 2015-04-07 5:20 GMT+08:00 Leek, Timothy - 0559 - MITLL <
>>>>>>>>>>> tleek at ll.mit.edu>:
>>>>>>>>>>>
>>>>>>>>>>>> Also note that the “taint” plugin is somewhat defunct.
>>>>>>>>>>>> “taint2” is the one we are actively using and developing.
>>>>>>>>>>>> --
>>>>>>>>>>>> Tim Leek
>>>>>>>>>>>> Technical Staff
>>>>>>>>>>>> Cyber System Assessments
>>>>>>>>>>>> MIT Lincoln Laboratory
>>>>>>>>>>>> 781-981-2975
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> From: Brendan Dolan-Gavitt <brendandg at gatech.edu>
>>>>>>>>>>>> Date: Monday, April 6, 2015 at 5:18 PM
>>>>>>>>>>>> To: xiaojuan Li <xiaotan6666 at gmail.com>
>>>>>>>>>>>> Cc: "panda-users at mit.edu" <panda-users at mit.edu>
>>>>>>>>>>>> Subject: Re: [panda-users] taint segmentation fault
>>>>>>>>>>>>
>>>>>>>>>>>> Could you run that under gdb and provide us with a backtrace
>>>>>>>>>>>> when it crashes?
>>>>>>>>>>>>
>>>>>>>>>>>> -Brendan
>>>>>>>>>>>>
>>>>>>>>>>>> On Sunday, April 5, 2015, xiaojuan Li <xiaotan6666 at gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>> excuse me,i have a question about taint
>>>>>>>>>>>>> plugin:(stringsearch:name=***;taint:tainted_instructions=1)
>>>>>>>>>>>>> when I started it showed success:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> but when it finished search,it showd "uninit taint plugin
>>>>>>>>>>>>> segementation fault"
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> how can I fix it?
>>>>>>>>>>>>> Thanks a lot!
>>>>>>>>>>>>> --
>>>>>>>>>>>>> wait and hope~~
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> wait and hope~~
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> panda-users mailing list
>>>>>>>>>>> panda-users at mit.edu
>>>>>>>>>>> http://mailman.mit.edu/mailman/listinfo/panda-users
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> wait and hope~~
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> wait and hope~~
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> wait and hope~~
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> wait and hope~~
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> wait and hope~~
>>>
>>
>>
>>
>> --
>> wait and hope~~
>>
>
>
>
> --
> wait and hope~~
>
--
wait and hope~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qqtaint1.png
Type: image/png
Size: 25300 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0009.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gdb1-2.png
Type: image/png
Size: 13244 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0010.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qqtaint2.png
Type: image/png
Size: 12246 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0011.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qtainted1.png
Type: image/png
Size: 99277 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0012.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qtainted52.png
Type: image/png
Size: 134012 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0013.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gdb2.png
Type: image/png
Size: 194887 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0014.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fast_shad.jpg
Type: image/jpeg
Size: 57614 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0002.jpg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qtainted4.png
Type: image/png
Size: 90587 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0015.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tainted1.jpg
Type: image/jpeg
Size: 63070 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0003.jpg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qtainted3.png
Type: image/png
Size: 106030 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0016.png
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qtainted2.png
Type: image/png
Size: 118621 bytes
Desc: not available
Url : http://mailman.mit.edu/mailman/private/panda-users/attachments/20150412/0599eb26/attachment-0017.png
More information about the panda-users
mailing list